Test Rig for High-Temperature Thermopower and Electrical Conductivity Measurements

A high-temperature test rig to simultaneously measure electrical conductivity and thermopower is described. The apparatus allows to perform measurements in a controlled atmosphere or vacuum to protect oxygen-sensitive materials. A spring-loaded mounting placed in the cold zone reduces the thermal contact resistance between the sample and two metallic blocks (the hot side and the heat sink) even at high temperatures. The hot-side metal block is periodically heated to obtain the thermopower from the slope of ΔV versus ΔT. Conductivity is measured before each thermopower measurement by a linear four-wire method. The automatic data acquisition and analysis are controlled by a LabView-based interface. Two interchangeable setups are possible. The first one uses silver blocks and K-type thermocouples and is suitable for temperatures from 300 K to about 1000 K. The second one uses W blocks and S-type thermocouples to allow higher-temperature measurements since all the hot-zone parts are made of Al₂O₃, Pt or W. The device was tested using PdAg alloy and Ni rods and, for the low-temperature range, the NIST standard reference material 3451 (bismuth telluride), strictly confirming the reference data.     

Small Area Drawings of Outerplanar Graphs

We show three linear-time algorithms for constructing planar straight-line grid drawings of outerplanar graphs. The first and the second algorithm are for balanced outerplanar graphs. Both require linear area. The drawings produced by the first algorithm are not outerplanar while those produced by the second algorithm are. On the other hand, the first algorithm constructs drawings with better angular resolution. The third algorithm constructs outerplanar drawings of general outerplanar graphs with O(n ^1.48) area. Further, we study the interplay between the area requirements of the drawings of an outerplanar graph and the area requirements of a special class of drawings of its dual tree. Work partially supported by MUR under Project MAINSTREAM Algorithms for Massive Information Structures and Data Streams.     

Optimization of the working cycle for a hydrogen production and power generation plant based on aluminum combustion with water

The working cycle of a novel hydrogen and power generation system based on aluminum combustion with water is analyzed in order to evaluate the best performance in terms of energy conversion efficiency. The system exploits the exothermic reaction between aluminum and steam and produces thermal power for a super-heated steam cycle and hydrogen as a by-product of the reaction.     

Influence of pH and temperature on the growth of and toxin production by neurotoxigenic strains of Clostridium butyricum type E

Strains of Clostridium butyricum that produce botulinal toxin type E have been implicated in outbreaks of foodborne botulism in China, India, and Italy, yet the conditions that are favorable for the growth and toxinogenesis of these strains remain to be established. We attempted to determine the temperatures and pH levels that are most conducive to the growth of and toxin production by the six strains of neurotoxigenic C. butyricum that have been implicated in outbreaks of infective and foodborne botulism in Italy. The strains were cultured for 180 days on Trypticase-peptone-glucose-yeast extract broth at various pHs (4.6, 4.8, 5.0, 5.2, 5.4, 5.6, and 5.8) at 30 degrees C and at various temperatures (10, 12, and 15 degrees C) at pH 7.0. Growth was determined by checking for turbidity; toxin production was determined by the mouse bioassay. We also inoculated two foods: mascarpone cheese incubated at 25 and 15 degrees C and pesto sauce incubated at 25 degrees C. The lowest pH at which growth and toxin production occurred was 4.8 at 43 and 44 days of incubation, respectively. The lowest temperature at which growth and toxin production occurred was 12 degrees C, with growth and toxin production first being observed after 15 days. For both foods, toxin production was observed after 5 days at 25 degrees C. Since the strains did not show particularly psychrotrophic behavior, 4 degrees C can be considered a sufficiently low temperature for the inhibition of growth. However, the observation of toxin production in foods at room temperature and at abused refrigeration temperatures demands that these strains be considered a new risk for the food industry.     

Differential interference contrast x-ray microscopy with twin zone plates

X-ray imaging in differential interference contrast (DIC) with submicrometer optical resolution was performed by using a twin zone plate (TZP) setup generating focal spots closely spaced within the TZP spatial resolution of 160 nm. Optical path differences introduced by the sample are recorded by a CCD camera in a standard full-field imaging and by an aperture photodiode in a standard scanning transmission x-ray microscope. Applying this x-ray DIC technique, we demonstrate for both the full-field imaging and scanning x-ray microscope methods a drastic increase in image contrast (approximately 20x) for a low-absorbing specimen, similar to the Nomarski DIC method for visible-light microscopy.     

Off-axis measurements of atmospheric trace gases by use of an airborne ultraviolet-visible spectrometer

An airborne UV-visible spectrometer, the Gas Analyzer Spectrometer Correlating Optical Differences, airborne version (GASCOD/A4pi) was successfully operated during the Airborne Polar Experiment, Geophysica Aircraft in Antarctica airborne campaign from Ushuaia (54 degrees 49' S, 68 degrees 18' W), Argentina in southern spring 1999. The instrument measured scattered solar radiation through three optical windows with a narrow field of view (FOV), one from the zenith, two from the horizontal, as well as actinic fluxes through 2pi FOV radiometric heads. Only a few airborne measurements of scattered solar radiation at different angles from the zenith are available in the literature. With our configuration we attempted to obtain the average line-of-sight concentrations of detectable trace gases. The retrieval method, based on differential optical absorption spectroscopy, is described and results for ozone are shown and compared with measurements from an in situ instrument as the first method of validation.     

Availability analysis of a N modules parallel system with common memory,central controller and distributed software

Parallel systems with processing distributed in the various modules are very interesting examples of hardware/software tradeoffs within a complex structure. An example of such a system mode of N modules, has been considered. The implications of a common memory and a central controller are analysed and an availability model is derived.The division of the software task into subtasks is viewed as a source of possible deadlock of the structure. Series catastrophic states due to hard core units and software coupling are included in the availability analysis.