Analytical solutions for species transport in a T‐sensor at low peclet numbers

A 3D analytical solution is presented for the problem of mass transport in a T‐sensor by taking the axial diffusion effects into account. The solution methodology is based on an eigenfunction expansion of the solute concentration and enjoys the variational calculus for the solution of the associated eigenvalue problem. The method is capable of handling a mixed electroosmotic and pressure‐driven velocity profile and is executed assuming a rectangular channel cross‐section although it can be easily extended to more complex geometries. Two simplified models, one based on a uniform velocity profile, valid for the channel half height to Debye length ratios of above 100, and the other based on a depthwise averaging of the species concentration to be used for cases in which the channel width to height ratio is above 5 are also presented. As a part of the latter, expressions are derived for the Taylor dispersion coefficient of the mixed flow in a slit microconduit. The most interesting finding of this study is that, when the diffusion mechanism significantly contributes to the axial movement of the species, the well‐known heterogeneous mass transport evolves into a nearly uniform pattern in the depthwise direction and the mixing length noticeably increases. © 2016 American Institute of Chemical Engineers AIChE J, 62: 4119–4130, 2016     

Effects of Desolvating Agent Types,Ratios, and Temperature on Size and Nanostructure of Nanoparticles from α‐Lactalbumin and Ovalbumin

In this study, we compare the preparation of ovalbumin (OVA) and α‐lactalbumin (α‐LA) nanoparticles using different desolvating agents (ethanol, acetone, and methanol) and water: desolvating agent volume ratios (1:3, 1:4, 1:5, 1:10, and 1:20). Also the effects of protein solution temperature (25, 50, and 80 ℃) on the size of nanoparticles and the stability of crosslinked nanoparticles for 30 d were studied. OVA and α‐LA were shown to be good candidates for nanoparticulation and nanoparticles in the range of 60 to 230 nm were obtained. The comparison between the 2 proteins offers guidance to optimize OVA and α‐LA nanoparticle fabrication and to efficiently obtain nanoparticles with desired characteristics. The particle sizes of OVA nanoparticles were found to be in the range of 60 to 160 nm, and the particle sizes of α‐LA were between 150 and 230 nm. The sizes varied with different desolvating agents: for OVA, ethanol, and methanol both produced nanoparticles smaller than 100 nm; for α‐LA, methanol produced the smallest nanoparticles. Water: desolvating agent ratios, in the studied range, did not show a significant effect on the particle sizes for both OVA and α‐LA nanoparticles. The size and morphology of the nanoparticles were found to change when the protein solutions were heated up to 50 and 80 ℃ and cooled down before nanoparticulation and most nanoparticles had a smaller diameter.     

Evaluation of mustard (Brassica juncea) protein isolate prepared by steam injection heating for reduction of antinutritional factors

A process for the preparation of mustard protein isolate, comprising steps such as dispersion of defatted meal in 0.1 mol/l NaCl solution, incubation, extraction at alkaline pH, followed by treatment of the protein solution with activated carbon was developed. The protein, coagulated by steam injection, was subjected to separation by centrifugation, washing and spray drying. The parameters evaluated were protein yield, purity, presence of antinutritional factors and nutritional quality of proteins. The protein yield was 58-60%. The purity of the protein isolate was 95%. The hydrolysed products of glocosinolates like isothiocyanates and oxazolidine thione levels, phenolics and phytic acid levels were low in the protein isolate. The in vitro digestibility of the protein isolate was 92.4% compared to 80.6% of the meal. Chemical score of the meal and protein isolate were similar; isoleucine was the first limiting amino acid. The calculated nutritional indices, essential amino acid index, biological value, nutritional index and C-PER of protein isolate were higher compared to meal. The protein quality as indicated by amino acid profile and PDCAAS scores for 10-12-years old and adults were 100.     

Siloxane‐based segmented poly(urethane‐urea) elastomer: Synthesis and characterization

A series of segmented poly(urethane‐urea) block copolymers were synthesized with varying proportions of polydimethylsiloxane diols in combination with polytetramethylene ether glycol (PTMG) using 4,4'‐methylenediphenyl diisocyanate followed by chain extension with a (50:50 mol %) mixture of 4,4'‐methylene‐bis(3‐chloro‐2,6‐diethylaniline) (M‐CDEA) and 1,4‐butanediol (BD). The molecular structures of polydimethylsiloxane urethane‐ureas were characterized by ATR‐FTIR and ¹H‐NMR spectroscopic techniques. Distribution of siloxane domain and its influence on surface roughness were investigated by scanning electron microscopy (SEM) and atomic forced microscopy (AFM), respectively. The mechanical and thermal properties of the elastomers were studied by thermogravimetric analysis, dynamical mechanical thermal analysis, and tensile measurement. The results showed that by incorporation of polydimethylsiloxane diol and M‐CDEA chain extender in polyurethane formulation, some improvements in thermal stability, fire resistance and surface hydrophilicity were achieved. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1743–1751, 2013     

Pulsed Plasma Neutron Accelerator

Adoptable beam of neutrons enables investigating neutron interaction with matter and extends its applications. Neutrons from a low energy Sb–Be source are accelerated to the desired energies by collision with high energy protons from a plasma focus device. Protons pass through a set of magnetic lenses and converged to a small point where the neutron source is located. Proton density is increased by narrowing the beam with a charge funnel. From a practical point of view, the source geometry of neutron is a half-cone, which enhances the number of forward peaked neutrons after collision with proton.     

Enhanced oil recovery from carbonate reservoirs by spontaneous imbibition of low salinity water

An experimental study was performed to investigate the impact of low salinity water on wettability alteration in carbonate core samples from southern Iranian reservoirs by spontaneous imbibition. In this paper, the effect of temperature, salinity, permeability and connate water were investigated by comparing the produced hydrocarbon curves. Contact angle measurements were taken to confirm the alteration of surface wettability of porous media. Oil recovery was enhanced by increasing the dilution ratio of sea water, and there existed an optimum dilution ratio at which the highest oil recovery was achieved. In addition, temperature had a very significant impact on oil recovery from carbonate rocks. Furthermore, oil recovery from a spontaneous imbibition process was directly proportional to the permeability of the core samples. The presence of connate water saturation inside the porous media facilitated oil production significantly. Also, the oil recovery from porous media was highly dependent on ion repulsion/attraction activity of the rock surface which directly impacts on the wettability conditions. Finally, the highest ion attraction percentage was measured for sodium while there was no significant change in pH for all experiments.     

Incidence of aflatoxin M1 in human breast milk in Tehran, Iran

This study examined the exposure of infants to aflatoxin M1 (AFM1) and of lactating mothers to aflatoxin B1 (AFB1), using AFM1 in breast milk as a biomarker for exposure to AFB1. An enzyme-linked immunosorbent assay (ELISA) was modified for the analysis of AFM1 in breast milk samples from 160 women in Tehran, Iran. AFM1 was detected in 157 samples by average concentration of 8.2 ± 5.1 ng/kg (range 0.3–26.7 ng/kg).The concentration of AFM1 in one sample was higher than the maximum tolerance limit accepted by European Union and USA (25 ng/kg), but in 55 samples was higher than the maximum concentration recommended by Australia and Switzerland (10 ng/kg).Logistic regression Analysis failed to show significant correlation between AFM1 and gestational age, education, postnatal age, gender, nationality, clinical condition, the number of family member, the number of children, type and amount of dairy consumption, vegetable, fruits, oil and meat. But it was significant relation to the cereal consumption, also to the height at birth.     

Direct power control of DFIG based on discrete space vector modulation

This paper presents a new direct power control (DPC) strategy for a double fed induction generator (DFIG) based wind energy generation system. Switching vectors for rotor side converter were selected from the optimal switching table using the estimated stator flux position and the errors of the active and reactive power. A few number of voltage vectors may cause undesired power and stator current ripple. In this paper the increased number of voltage vectors with application of the Discrete Space Vector Modulation (DSVM) will be presented. Then a new switching table in supersynchronous and subsynchronous frames will be proposed. Simulation results of a 2 MW DFIG system demonstrate the effectiveness and robustness of the proposed control strategy during variations of active and reactive power, machine parameters, and wind speed.     

Trusted virtual domains: Color your network

Trusted Virtual Domains (TVDs) provide a secure IT infrastructure offering a homogeneous and transparent enforcement of access control policies on data and network resources. In this article, we give an overview of the fundamental ideas and basic concepts behind TVDs, present a realization of TVDs, and discuss application scenarios.