Reaction of chrysotile asbestos with triphenylmethane dyes

Triphenylmethane dyes react at ambient conditions with chrysotile asbestos to form homogeneously coloured fibres. Formation of the chelates on the fibre varies: for Basic Fuchsin, Malachite Green and Methyl Blue equilibrium is reached in 1 h, the concentration on the fibre is 1% to 2.4%, and increases slightly on boiling. For Brilliant Blue R, Crystal Violet, and Methyl Violet equilibrium is reached after 16 to 24 h, the concentration on the fibre is 8% to 10%, and increases greatly on boiling reaching 10% to 31%. No precipitates were observed on the coloured fibre under the scanning electron microscope indicating a chelate formation. This was also supported by X-ray diffraction and infrared analysis.     

An effective scheduling scheme for multi-hop multicast in wireless mesh networks

With the utilization of concurrent transmission strategy, a throughput-enhanced scheduling scheme is devised for multicast service in wireless multi-hop mesh networks. Since the performance of a multicast mechanism is constrained in a wireless setting due to the interference among local wireless transmissions, the interference relationships are first characterized by introducing a graph transformation method. Based on the graph transformation, the multicast scheduling problem is converted to the graph coloring problem, and then a capacity greedy algorithm is designed to provide concurrent transmission scheduling so that the demanded multicast transmission rate can be achieved. Moreover, the necessary and sufficient conditions of multicast schedulable feasibility are derived. Through corresponding simulations, it is shown that the proposed strategy can enhance the throughput of wireless multi-hop multicast systems significantly.     

A meta-modelling framework for knowledge consistency in collaborative design

The design of complex system requires a lot of interactions between experts and then between numerous Computer Aided X software (CAX) (where X can be Design (CAD), Engineering (CAE), Manufacturing (CAM), etc.). In order to improve the consistency of the whole system design and the related data and information, knowledge crossing the expertises must be tracked and formalized regarding a shared reference. That means that instead of defining a large reference models to which each expert refers to, a light collaborative model is defined enabling to connect data from each expert model to adhoc data from other expert models, following the least commitment principle. In this topic, a new meta-model is proposed in a Model-Driven Engineering approach to manage the integration of heterogeneous experts’ knowledge models in a collaborative process. The structure of the proposed knowledge meta-model is defined taking into account the complexity of knowledge definition and the properties of its components. This meta-model is split in a meta-model of data on one hand and a Collaboration Meta-Model in the other hand, to represent the distinction between the core concepts of knowledge and additional elements serving to represent the relation between these concepts, and between concepts of heterogeneous experts’ models. The proposed meta-model is illustrated on an industrial case study to highlight the way to put it in use, and its interests to enable collaboration between experts throughout the design process.     

The recovery of uranium and lanthanides during the production of nitrophosphate fertilisers using tertiary amyl alcohol

When phosphate rock is dissolved in nitric acid, phosphoric acid and uranium can be selectively extracted by tertiary amyl alcohol; other impurities including the lanthanides remain in the aqueous phase. Uranium can be recovered from the alcohol phase by selective stripping and the lanthanides from the raffinate by extraction with tributyl phosphate.     

Materials based on maize biopolymers: Effect of flour components on mechanical and thermal behavior

The present study describes the effects of glycerol, relative humidity (RH) and the minor components of corn flour on mechanical and thermal properties of native flour, defatted flour, and starch‐based materials. The kinetic of retrogradation for these different materials were dissimilar. For all samples, strain at break shows a maximum value as a function of RH followed by a decrease, explained by the appearance of water and glycerol clusters. Starch controls the mechanical properties of corn flour‐based material and their variations with temperature and humidity. Lipid and protein have negative effect on mechanical properties of thermoplastic flour toward starch but they did not have a plasticizing effect on the physicochemical behavior of the matrix. T_gs decreased as a result of water content increase.     

Advances in the industrial production of halal and kosher red meat

The worldwide volume and value of trade in halal and kosher meat and co-products are huge. Muslim countries alone consumed meat estimated to be worth USD 57.2 billion in 2008. The halal and kosher principles that govern the production of red meat have many similarities, as well as some fundamental differences. Perhaps the most significant difference is that at the time of slaughter, the animal needs only to be alive to meet the minimum halal requirement, but must be both alive and conscious for kosher. It is for this reason that reversible pre-slaughter stunning is acceptable only for halal meat, although a compromise form of post-slaughter stunning is now considered kosher in some countries. Extensive research on animal physiology and welfare has characterised and optimised the methods for stunning livestock, and enabled advancement in associated technologies. This forms the basis for harmonising the religious and secular requirements for the protection of animal welfare at slaughter. These technologies and the associated processing practices for the industrial production of halal and kosher meat are reviewed in this paper.     

Dyeing of nylon 6 fabric with a bifunctional sulphatoethylsulphone reactive disperse dye

A bifunctional reactive disperse dye containing two temporarily anionic sulphatoethylsulphone groups was synthesised and applied to nylon 6 fabric by exhaust dyeing at a variety of pH levels and temperatures. A monofunctional reactive disperse dye containing one temporarily anionic sulphatoethylsulphone group was also synthesised, and its dyeing behaviour was compared with the bifunctional dye. The bifunctional reactive disperse dye exhibited high exhaustion and total fixation yield under alkaline conditions. The results also indicate that the introduction of two temporarily anionic sulphatoethylsulphone groups of the bifunctional dye gave an enhancement in dyeing performance compared with that of the monofunctional dye. The dyes also showed very good levelling and fastness properties on nylon 6 fabric.     

Functional stability of frozen normal and high pH beef

The functional properties of whole, diced or minced high and normal pH beef were determined after 0, 1, 2, 3 and 7 month’s storage. There was no interaction between pH, degree of comminution and storage time for most of the attributes measured. Regardless of storage time or comminution method, high pH meat had significantly (P < 0.001) higher sarcoplasmic protein solubility, water holding capacity, cooked batter torsion stress and strain, yield and emulsion stability than normal pH meat. Normal pH meat had significantly (P < 0.01) higher myofibrillar protein solubility and hue angle than high pH meat. Water holding capacity significantly (P < 0.01) decreased and hue angle increased with the increase in the degree of comminution. Protein solubility in raw meat and the cooked batter stress, strain, yield and emulsion stability of both high and normal pH meat deteriorated with time. However, this deterioration was faster in the normal pH meat compared to high pH meat except for total and myofibrillar protein solubility. Within the parameters of the present study, it is concluded that frozen high pH meat possesses superior functional attributes compared to normal pH meat regardless of the degree of comminution or storage time.     

Optimization approaches and climates investigations in NZEB—A review

The conception of net zero energy buildings (NZEB) has been introduced to limit energy consumption and pollution emissions in buildings. Classification of NZEB is based on renewable energy (RE) supply options, energy measurement process, RE-sources location, and balances whether are energetic or exergetic. In general, it is traditionally agreed that there are three main steps to reach the NZEB performance, starting through the use of passive strategies, energy efficient technologies, and then RE generation systems. Then, these three steps could be accompanied with the smart integration of advanced efficient energy technologies. A state of the art shows that the main ZEB studies are related to: energy savings, reduce electric bills, energy independence, pollution reduction, and occupants comfort, in addition, others are more interested in the aesthetic aspect by combining modern technologies with innovations to achieve high energy and sustainability performance. Building optimization is a promising technique to evaluate NZEB design choices; it has been adopted to choose the perfect solution to reach the zero energy performance through the optimization of an objective function related to energy (thermal loads, RE generation, energy savings) and/or environment (CO₂ emissions) and/or economy (life-cycle cost (LCC), net-present value (NPV), investment cost). This paper starts by presenting the global energetic and pollution challenges the world faces. Moreover, it shows, to the best to the author’s knowledge, the existing NZEB definitions and the corresponding case studies investigated in 8 different climatic zones (humid continental, humid subtropical, Mediterranean, moderate continental, moderate continental, marine west coast, tropical, semi-arid and hot), the paper also focus on the importance to treat each climate separately. Even in the same country, two or more climates may co-exist. NZEBs drawbacks are also presented. Furthermore, different optimization problems are reviewed in the last section. Building energy optimization methods are employed to obtain the ideal solution for specific objective functions which are either related to energy, and/or environment and/or economy. Optimization variables are distributed between passive and/or RE generation systems. Finally, a table summarizing the most commonly used electric and thermal RE applications which yield to the zero energy balance in each climate, as well as three flowcharts are presented to summarize the whole three-stage procedure, to reach NZEB, starting from building designing, passing through the optimization procedure, and lastly categorizing the zero energy balance.     

Preclinical evaluation of <Superscript>99<Emphasis Type="Italic">m</Emphasis> </Superscript>Tc-histidine as a possible tumor imaging agent

Radiolabeling of histidine (Hist), an essential amino acid, with ^99mTc was performed. The radiochemical yield higher than 95% was achieved with stannous chloride as a reducing agent. Factors affecting the radiochemical yield (histidine amount, stannous chloride amount, reaction time, pH of the reaction mixture) were studied in detail, and the reaction conditions were optimized. In vitro stability of the radiolabeled complex was checked, and it was found to be stable for up to 6 h. ^99mTc-Hist was injected intravenously into normal and tumor-bearing mice. Biodistribution studies revealed that the ^99mTc-Hist uptake in tumor sites was 10 and 16% ID/g in ascites and 7 and 9.2% ID/g in thigh solid tumor at 60 and 120 min post injection, respectively. The amount of ^99mTc-Hist in ascites and solid tumor increased with time and then decreased slowly. Thus, ^99mTc-Hist can be used as a potential agent for imaging tumor sites.