Prediction of the thickness loss and recovery of cut-pile carpets imposed to UV exposure and wear using polynomial regression method

Ultraviolet radiation which exists in environment around can be regarded as a major source of textile materials. In this study, the effect of UV exposure on the cut-pile carpet was investigated. A UV chamber was used to expose different levels of accelerated UV radiation on the samples of the machine-woven pile carpet. Wear test were then carried out on all samples using a Hexapod tumbler machine. The short-term static loading was applied to the carpets and the thickness loss percent (TL) and recovery percent (RP) of the samples at different times after load removal was measured using standard methods. Factorial experimental design and response surface method were applied for to create polynomial regression models and predict each of the thickness loss and recovery percent of carpet samples. The model is capable to determine the contribution of different variables. The results of the modeling revealed a desirable fit. The adjusted R² values were also high and significant. The ANOVA test indicated that the presented models were valid at 5% significant level.     

Analysis of the effect of UV radiation on the recovery properties of pile carpet after static loading through analytical and viscoelastic modeling

Different combinations of spring and dashpot systems are usually considered to model the mechanical behavior of textile materials. In this work, Jeffery’s mechanical model, which is a combination of spring and dashpot components, was used to model the recovery behavior of the pile carpet after static loading. The carpet samples were exposed to different levels of UV radiation. The short-term static loading was applied to the samples. The recovery response or thickness vs. time was then measured. By analyzing this model and using the best curve fitting based on the least square method, the viscoelastic parameters in each UV exposure time were calculated. Four attributes of compression were then studied. The results showed that the thickness loss and the maximum compression under a constant load were mainly dominated by the deterioration of the dashpot elements (Plastic part of deformation). The thickness loss and the maximum compression were both higher at longer UV exposure times. The thickness loss showed a good linear correlation with the inverse of the first dashpot constant, 1/η₁. In contrast, the speed of recovery and the potential stored energy were mainly dominated by the parameters of the Voigt–Kelvin body, i.e. the elastic part of the compression.     

A new approach to characterization of asphaltene

Asphaltene is the fraction of crude oil which is soluble in toluene but insoluble in light hydrocarbon solvents such as pentane or heptanes. In this work, a new approach has been proposed to account critical properties of asphaltene, and the proposed approach was verified using experimental data reported in the literature. The results show that the proposed approach correlates more accurately the critical properties of asphaltene data and is in agreement with data reported in the literature with an average absolute deviation of 6.7%. Therefore, the correlations obtained from this proposed approach resulted in a good agreement with data which show a significant improvement in comparison with the previous models in the available literature.     

Combining Lees–Edwards boundary conditions with smoothed profile-lattice Boltzmann methods to introduce shear into particle suspensions

Using walls to introduce shear into a domain causes wall effects in the calculation of rheological properties of suspensions. Employing Lees–Edwards boundary conditions as an alternative method, removes these effects. Earlier methods of solid–fluid interactions in the framework of lattice Boltzmann method, such as Ladd and ALD methods, violate conservation law of the translational and rotational momentum (Galilean invariance). In the present study, Lees–Edwards boundary condition has been combined with smoothed profile method (SPM) intending to eliminate Galilean invariance errors. The combined method is validated by allowing a particle to cross a Lees–Edwards boundary. Moreover, third-order interpolation is used for particle distribution functions leaving the domain in the velocity gradient direction to eliminate bumps in the angular velocity of the particle when crossing the Lees–Edwards boundary. As another test case, two interacting circular cylinders placed in a sheared domain using Lees–Edwards boundary condition. Comparing results with the ones presented in the literature shows good agreement.     

Facile Growth of Porous Hierarchical Structure of ZnO Nanosheets on Alumina Particles via Heterogeneous Precipitation

ZnO nanosheets and nanoflakes were grown on alumina particles in the absence of surfactants via heterogeneous precipitation using urea, zinc acetate and bayerite as precursors. Thermo-gravimetric analysis （TGA）, X-ray diffraction （XRD） and Fourier transform infrared spectroscopy （FTIR） were used and the results indicated the formation of only two phases： wurtzite-type ZnO and γ-Al2O3. ZnO nanoflakes were grown on alumina particles in the samples with ZnO content of 40 and 60 wt%, By increasing the ZnO content to 80 wt%, a porous hierarchical structure of ZnO with nanosheet arrays appeared. Both of these nanoflakes and nanosheets were about 40-80 nm in thickness and about 1-2 μm in diameter. It was proposed that Zns（CO3）2（OH）6 nuclei undergo higher growth rates in thin sheets at edges of bayerite particles with a higher surface energy. The Brunauer-Emmett-Teller （BET） measurements proved a reachable high surface area for hierarchical structures of ZnO nanosheets, which could mainly be attributed to their unique growth on alumina particles. Also, UV absorption results revealed that ZnO--Al2O3 compositions still show the UV characteristic absorption of ZnO, which can evidence the presence of photocatalytic properties in ZnO-Al2O3 compositions.     

Epidemiology of bicycle injuries in 13 health divisions, Islamic Republic of Iran 2003

Bicyclists are vulnerable road users for severe injury all over the world. The nature and extent of such injuries are less well known in Iran. Using data from a comprehensive survey conducted by the Ministry of Health and Medical Education in 13 health divisions of Iran, in 2003, we examined circumstances around bicyclist injury and death. Trained health workers completed the survey instruments by interviewing patients who stayed more than 24h in hospitals and/or relatives, hospital personnel and by reviewing patient charts. Data were cross-matched with medico-legal documents to prevent missing deaths. The information that was collected from 64 cities/towns' emergency departments (EDs), over the study period, showed that 440 injured cyclists were hospitalized and/or died due to traffic collisions. Most injuries occurred in males (94.8%) and in the young (median age: 14 years with 75% 相似文献   

The analytical solution of the buckling of composite truncated conical shells under combined external pressure and axial compression?

The objective of this research is determining the buckling load of composite truncated conical shells under external loading by theoretical and numerical methods. The boundary conditions are assumed to be clamped. At first, basic equations and stability relations of conical shells were derived. The analysis is carried out using Donnel-type stability equations for thin cross-ply conical shells. By applying Galerkin??s method, these equations are converted to a system of ordinary time dependent differential equations. Ritz method is employed for finding the dynamic stability load. Finally, the critical static and dynamic buckling loads and the corresponding wave numbers have been found analytically. Then comparison of results is considered. Results of analytical calculations are compared with numerical results and with other researchers?? analytical results. The effects of geometric parameters, the cone semi-vertex angle, number of layers and material of fibers on buckling loads are discussed.     

The effect of natural antioxidants extracted from plant and animal resources on the oxidative stability of soybean oil

The objective of this study was to evaluate and compare the antioxidant activity of protein hydrolyzates isolate (PHI) from Crucian carp (Carassius carassius) fish and cow's intestine along with microwave-assisted olive leaf extract (OLE) encapsulated by Arabic gum and maltodextrin, in soybean oil. The antioxidant activity of PHIs at three concentrations of 200, 500 and 1000 mg/kg and OLE samples containing 70 mg/kg total phenolics during 20 days storage was evaluated by peroxide value, TBA value, p-anisidine value and Rancimat stability test. The fish PHI at concentration of 1000 mg/kg, cow's intestine PHI at 500 and 1000 mg/kg and OLE encapsulated with Arabic gum showed best oxidative protection activity (more than BHT at 100 and 200 mg/kg). OLE had a suitable antioxidant activity in soybean oil and encapsulation improved the thermal stability of phenolic compounds, but on the other hand, it decreased the antioxidant efficiency of OLE.     

Effect of Multi-Step Tempering on Retained Austenite and Mechanical Properties of Low Alloy Steel

 The effect of multi-step tempering on retained austenite content and mechanical properties of low alloy steel used in the forged cold back-up roll was investigated. Microstructural evolutions were characterized by optical microscope, X-ray diffraction, scanning electron microscope and Feritscope, while the mechanical properties were determined by hardness and tensile tests. The results revealed that the content of retained austenite decreased by about 2% after multi-step tempering. However, the content of retained austenite increased from 36% to 51% by increasing multi-step tempering temperature. The hardness and tensile strength increased as the austenitization temperature changed from 800 to 920 ℃, while above 920 ℃, hardness and tensile strength decreased. In addition, the maximum values of hardness, ultimate and yield strength were obtained via triple tempering at 520 ℃, while beyond 520 ℃, the hardness, ultimate and yield strength decreased sharply.