Ligand‐Free Synthesis of Aluminum‐Doped Zinc Oxide Nanocrystals and their Use as Optical Spacers in Color‐Tuned Highly Efficient Organic Solar Cells

The color of polymer solar cells using an opaque electrode is given by the reflected light, which depends on the composition and thickness of each layer of the device. Metal‐oxide‐based optical spacers are intensively studied in polymer solar cells aiming to optimize the light absorption. However, the low conductivity of materials such as ZnO and TiO₂ limits the thickness of such optical spacers to tenths of nanometers. A novel synthesis route of cluster‐free Al‐doped ZnO (AZO) nanocrystals (NCs) is presented for solution processing of highly conductive layers without the need of temperature annealing, including thick optical spacers on top of polymer blends. The processing of 80 nm thick optical spacers based on AZO nanocrystal solutions on top of 200 nm thick polymer blend layer is demonstrated leading to improved photocurrent density of 17% compared to solar cells using standard active layers of 90 nm in combination with thin ZnO‐based optical spacers. These AZO NCs also open new opportunities for the processing of high‐efficiency color tuned solar cells. For the first time, it is shown that applying solution‐processed thick optical spacer with polymer blends of different thicknesses can process solar cells of similar efficiency over 7% but of different colors.     

Single‐Step Deposition of Au‐ and Pt‐Nanoparticle‐Functionalized Tungsten Oxide Nanoneedles Synthesized Via Aerosol‐Assisted CVD,and Used for Fabrication of Selective Gas Microsensor Arrays

Tungsten oxide nanostructures functionalized with gold or platinum NPs are synthesized and integrated, using a single‐step method via aerosol‐assisted chemical vapour deposition, onto micro‐electromechanical system (MEMS)‐based gas‐sensor platforms. This co‐deposition method is demonstrated to be an effective route to incorporate metal nanoparticles (NP) or combinations of metal NPs into nanostructured materials, resulting in an attractive way of tuning functionality in metal oxides (MOX). The results show variations in electronic and sensing properties of tungsten oxide according to the metal NPs introduced, which are used to discriminate effectively analytes (C₂H₅OH, H₂, and CO) that are present in proton‐exchange fuel cells. Improved sensing characteristics, in particular to H₂, are observed at 250 °C with Pt‐functionalized tungsten oxide films, whereas non‐functionalized tungsten oxide films show responses to low concentrations of CO at low temperatures. Differences in the sensing characteristics of these films are attributed to the different reactivities of metal NPs (Au and Pt), and to the degree of electronic interaction at the MOX/metal NP interface. The method presented in this work has advantages over other methods of integrating nanomaterials and devices, of having fewer processing steps, relatively low processing temperature, and no requirement for substrate pre‐treatment.     

Estimation of Desired Motion Intention and compliance control for upper limb assist exoskeleton

International Journal of Control, Automation and Systems - In this paper, we have addressed two issues for upper limb assist exoskeleton. 1) Estimation of Desired Motion Intention (DMI); 2) Robust...     

Toward Xeno-Free Differentiation of Human Induced Pluripotent Stem Cell-Derived Small Intestinal Epithelial Cells

The small intestinal epithelium has an important role in nutrition, but also in drug absorption and metabolism. There are a few two-dimensional (2D) patient-derived induced pluripotent stem cell (iPSC)-based intestinal models enabling easy evaluation of transcellular transport. It is known that animal-derived components induce variation in the experimental outcomes. Therefore, we aimed to refine the differentiation protocol by using animal-free components. More specifically, we compared maturation of 2D-cultured iPCSs toward small intestinal epithelial cells when cultured either with or without serum, and either on Geltrex or on animal-free, recombinant laminin-based substrata. Differentiation status was characterized by qPCR, immunofluorescence imaging, and functionality assays. Our data suggest that differentiation toward definitive endoderm is more efficient without serum. Both collagen- and recombinant laminin-based coating supported differentiation of definitive endoderm, posterior definitive endoderm, and small intestinal epithelial cells from iPS-cells equally well. Small intestinal epithelial cells differentiated on recombinant laminin exhibited slightly more enterocyte specific cellular functionality than cells differentiated on Geltrex. Our data suggest that functional small intestinal epithelial cells can be generated from iPSCs in serum-free method on xeno-free substrata. This method is easily converted to an entirely xeno-free method.     

Influence of different viscosity grade cellulose-based polymers on the development of valsartan controlled release tablets

This work is based on formulating and optimizing controlled release (CR) valsartan (160 mg) tablets using different viscosity grades of the cellulosic polymer. The objective was to develop an effective once-daily drug delivery system of this cardiovascular agent. Central composite design was used for designing the formulations. Polymers used were Methocel® K4M, K15M and K100M. Compatibility of excipients with active was studied through FT-IR. Micromeritic properties were determined and formulations exhibiting appropriate flow characteristics were compressed. Swelling behavior and in vitro buoyancy effect were studied and response surface curves were constructed to optimize the formulation. Multi-point dissolution profiles of valsartan CR tablets at pH 1.2, 4.5 and 6.8 were obtained. Model-dependent and model-independent methods were performed including f2, stability test as per ICH guidelines and ANOVA. FT-IR studies revealed the compatibility of valsartan with all excipients. Formulation K4T9 (containing 25% K4M polymer) was selected to be the best optimized trial, based on physical properties and controlled release profile (23% at 4 h, 82% at 16 h and 100% at 24 h). Results of buoyancy and swelling behavior indicated that HPMC-K4M polymer exhibited excellent floating lag time and swelling indexes. In vitro drug release kinetics showed that formulation K4T9 displayed Korsmeyer–Peppas drug release pattern with r value > 0.99. The manufacturing process of K4T9 was also found to be reproducible with a shelf life period of 41 and 36 months at room temperature and accelerated conditions, respectively. Valsartan CR matrix-based formulation was successfully prepared with Methocel K4M retardant.     

In vitro synergism of antimutagenic and antioxidant activities of Phoenix dactylifera fruit

The availability of total phenolics of date flesh (Pheonix dactylifera) in aqueous and acidified methanol and in vitro synergism of their antimutagenic and antioxidant activities were investigated. The antimutagenic activities of date flesh extracts tested against Salmonella strains TA-98 and TA-100 using Ames bacterial testing were in the range of 36.47 to 79.74% against the standard mutagens potassium dichromate and sodium azide. The antioxidant activities assessed as maximal inhibitory concentrations (IC₅₀) for DPPH radicals and linoleic acid peroxidation inhibition were 812.90 to 2,076.10 μg/mL and 54.43 to 80.89%, respectively. The total phenolic contents of date flesh extracts (35.76 to 114.09mg/g of gallic acid equivalents) were found to be correlated with the biological activities. Use of 0.5 N acidified methanol was efficient for extraction of phenolic compounds with retained antioxidant and antimutagen activities. Dates are a good candidate as a source for development of chemotherapeutic drugs, nutracueticals, and functional food ingredients.     

Specific populations of the yeast Geotrichum candidum revealed by molecular typing

Geotrichum candidum is a ubiquitous yeast and an essential component in the production of many soft cheeses. We developed a multilocus sequence typing (MLST) scheme with five retained loci (NUP116, URA1, URA3, SAPT4 and PLB3) which were sufficiently divergent to distinguish 40 sequence types (STs) among the 67 G. candidum strains tested. Phylogenetic analyses defined five main clades; one clade was restricted to environmental isolates, three other clades included distinct environmental isolates and dairy strains, while the fifth clade comprised 34 strains (13 STs), among which all but two were isolated from milk, cheese or the dairy environment. These findings suggest an adaptation to the dairy ecosystems by a group of specialized European G. candidum strains. In addition, we developed a polymerase chain reaction inter‐long terminal repeat scheme, a fast and reproducible random amplification of polymorphic DNA‐like method for G. candidum, to type the closely related dairy strains, which could not be distinguished by MLST. Overall, our findings distinguished two types of dairy strains, one forming a homogeneous group with little genetic diversity, and the other more closely related to environmental isolates. Neither regional nor cheese specificity was observed in the dairy G. candidum strains analysed. This present study sheds light on the genetic diversity of both dairy and environmental strains of G. candidum and thus extends previous characterizations that have focused on the cheese isolates of this species. Copyright © 2016 John Wiley & Sons, Ltd.     

Design of New Cardanol Derivative: Synthesis and Application as Potential Biobased Plasticizer for Poly(lactide)

A novel biobased plasticizer made of cardanol is designed for poly(lactide) (PLA). This cardanol‐derived plasticizer, i.e., methoxylated hydroxyethyl cardanol (MeCard), is synthesized through methoxylation of the double bonds on the side chain of cardanol, and characterized by ¹H NMR and mass spectrometry. The plasticization effect of MeCard on the molecular structure, morphology, thermal and mechanical properties of PLA is evaluated and compared to that of a commercial cardanol, i.e., hydroxyethyl cardanol (pCard). The plasticization efficiency of MeCard is demonstrated by a substantial decrease of the glass transition temperature and storage modulus together with a significant increase of the elongation at break as compared to neat PLA. Moreover, MeCard exhibits higher plasticization performance than pCard toward PLA. Such behavior is related to a higher miscibility and compatibility between PLA and MeCard thanks to the methoxylation of the double bonds on the side chain of cardanol as shown by SEM micrographs.