Design of New Cardanol Derivative: Synthesis and Application as Potential Biobased Plasticizer for Poly(lactide)

A novel biobased plasticizer made of cardanol is designed for poly(lactide) (PLA). This cardanol‐derived plasticizer, i.e., methoxylated hydroxyethyl cardanol (MeCard), is synthesized through methoxylation of the double bonds on the side chain of cardanol, and characterized by ¹H NMR and mass spectrometry. The plasticization effect of MeCard on the molecular structure, morphology, thermal and mechanical properties of PLA is evaluated and compared to that of a commercial cardanol, i.e., hydroxyethyl cardanol (pCard). The plasticization efficiency of MeCard is demonstrated by a substantial decrease of the glass transition temperature and storage modulus together with a significant increase of the elongation at break as compared to neat PLA. Moreover, MeCard exhibits higher plasticization performance than pCard toward PLA. Such behavior is related to a higher miscibility and compatibility between PLA and MeCard thanks to the methoxylation of the double bonds on the side chain of cardanol as shown by SEM micrographs.

     

Synthesis and physicochemical investigation of chitosan-built hydrogel with induced glucose sensitivity

There is an urgent need to treat diabetes, and therefore, this work reports on a chitosan-built hydrogel functionalized by a glucose sensing moiety, which simulates pancreatic activity. The effect of external stimuli on various internal properties was investigated to establish the action of the hydrogel. The model drugs, fluorescein (D1) and rhodamine (D2), with a diol architecture, were investigated spectroscopically with 75.94% loading and 65.63% release. Consequently, a ligand to glucose ratio of 2:1 in comparison with a ligand to model drug ratio of 1:1 was addressed. The system was expected to lead to findings on applications for the self-controlled release of insulin in response to blood glucose levels.     

Complex structural contribution of the morphotropic phase boundary in Na0.5Bi0.5TiO3 - CaTiO3 system

The correlation between structure and dielectric properties of lead-free (1-x)Na_0.5Bi_0.5TiO₃ - xCaTiO₃ ((1-x)NBT - xCT) polycrystalline ceramics was investigated systematically by X-ray diffraction, combined with impedance spectroscopy for dielectric characterizations. The system shows high miscibility in the entire composition range. A morphotropic phase boundary (MPB), at 0.09?≤?x?<?0.15 was identified where rhombohedral and orthorhombic symmetries coexist at room temperature. The fraction of orthorhombic phase increases gradually with x in the MPB region. Dielectric measurements reveal that the relative permittivity increase with addition of Ca²⁺. This behavior is unusual with this kind of doping. A thermal hysteresis occurred only in the MPB composition which varies in a non-monotonically manner with x, detected by dielectric properties. This phenomenon is related to the crystalline microstructure by a linear relationship between the fraction of each phase and dielectric properties, and, more precisely, to the strong interaction between rhombohedral and orthorhombic phases.     

Preparation of a New Oligomeric Surfactant: N,N,N′,N″,N″-Pentamethyl Diethyleneamine—N,N″-Di-[Tetradecylammonium Bromide] and the Study of its Thermodynamic Properties

A new oligomeric surfactant: N,N,N′,N″,N″- pentamethyl diethyleneamine—N,N″-di-[tetradecylammonium bromide] referred to as 14-2-N(CH₃)-2-14 was synthesized, purified and characterized by Elemental Analysis, ¹H and ¹³C NMR and Electrospray. The micellar properties of this compound were determined by electrical conductivity and surface tension methods. Optical microscopy was also employed to study the behavior of anhydrous surfactant and the binary water/surfactant system as a function of temperature. The critical micellar concentration (cmc), degree of counterion binding and thermodynamic parameters of micellization (standard molar Gibbs energy, enthalpy and entropy of micellization) were determined by electrical conductivity measurements in the temperature range [24–54 °C]. Surface tension measurements also provide information about the dependence of the surface tension at the cmc (γ_cmc), pC₂₀ (negative logarithm of the surfactant’s molar concentration C₂₀, required to reduce the surface tension by 20 mN/m, the surface excess (Γ_max) at air/solution interface, the minimum area per surfactant molecule at the air/solution interface (Amin), surface pressure at the cmc (П_cmc), critical packing parameter(CPP) and the standard free energies of micellization ( \Updelta G_m⁰\Updelta G_{m}^{0}) and of adsorption ( \Updelta G_\textads⁰ \Updelta G_{\text{ads}}^{0} ).     

Ordinary Gasoline Emissions Induce a Toxic Response in Bronchial Cells Grown at Air-Liquid Interface

Gasoline engine emissions have been classified as possibly carcinogenic to humans and represent a significant health risk. In this study, we used MucilAir™, a three-dimensional (3D) model of the human airway, and BEAS-2B, cells originating from the human bronchial epithelium, grown at the air-liquid interface to assess the toxicity of ordinary gasoline exhaust produced by a direct injection spark ignition engine. The transepithelial electrical resistance (TEER), production of mucin, and lactate dehydrogenase (LDH) and adenylate kinase (AK) activities were analyzed after one day and five days of exposure. The induction of double-stranded DNA breaks was measured by the detection of histone H2AX phosphorylation. Next-generation sequencing was used to analyze the modulation of expression of the relevant 370 genes. The exposure to gasoline emissions affected the integrity, as well as LDH and AK leakage in the 3D model, particularly after longer exposure periods. Mucin production was mostly decreased with the exception of longer BEAS-2B treatment, for which a significant increase was detected. DNA damage was detected after five days of exposure in the 3D model, but not in BEAS-2B cells. The expression of CYP1A1 and GSTA3 was modulated in MucilAir™ tissues after 5 days of treatment. In BEAS-2B cells, the expression of 39 mRNAs was affected after short exposure, most of them were upregulated. The five days of exposure modulated the expression of 11 genes in this cell line. In conclusion, the ordinary gasoline emissions induced a toxic response in MucilAir™. In BEAS-2B cells, the biological response was less pronounced, mostly limited to gene expression changes.     

Poly(vinylidene fluoride) with zinc oxide and carbon nanotubes applied to pressure sheath layers in oil and gas pipelines

In this work, PVDF composites containing 0.2% (m/m) of carbon nanotubes (MWCNTs), PVDF with 5.0% (m/m) of zinc oxide (ZnO), and composites containing both particles in the same contents in the matrix were melt processed in a mini-extruder machine with double screws, using the counter-rotation mode. Composites were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), dynamic-mechanical analysis (DMA), and contact angle tests (CA). The samples presented the predominance of the α phase, with an increased degree of crystallinity as well as an increase in dimensional stability by incorporating both fillers, showing a synergistic effect between these particles, as shown on FTIR, DSC, and XRD results. SEM images showed a good dispersion of high aspect ratio particles. In general, DMA and TGA analysis showed that composites had not decreased their thermal and mechanical performance when compared to neat PVDF. Results of CA analysis showed an increase in the hydrophobicity of the sample containing MWCNTs. Permeability tests were also performed using a differential pressure system, combining high temperature and pressure, obtaining permeability measures and time lag. This work presents an alternative of composite materials, suggesting its application in the internal pressure sheath layers of oil and gas flexible pipes.     

Sol gel transitions during acid gelation of milk containing modified waxy maize starch. Differences between chemical and bacterial acidification measured using rheological and spectroscopic techniques

Modified waxy maize starch (1%, w/v) was added to skim milk and the mixtures were heated and homogenized. Acidification was conducted at 40 °C, using either glucono-δ-lactone (GDL) or a commercial starter culture. The physico-chemical changes occurring during acidification were monitored using small oscillatory rheology, diffusing wave spectroscopy and ultrasound spectroscopy. A similar gelling behaviour was noted for GDL and bacterial-induced gels; however, a difference was noted in the values of storage modulus (G′). The presence of starch did not seem to affect the development of the gel structure, nor the mobility and positional correlations of the casein micelles during acidification. On the other hand, starch increased the final storage modulus, G′ of the acid milk gels. These results indicate the absence of direct interactions between micelles and the modified starch granules.     

Geopolymers from Algerian metakaolin. Influence of secondary minerals

The influence of secondary phases (illite, quartz) on the geopolymerization reaction of metakaolin has been investigated by comparing two metakaolins, one prepared from a pure kaolinite and the other from illite- and quartz-containing Algerian kaolin from the Tamazert region, respectively. Geopolymerization was achieved by mixing the metakaolins with an alkaline sodium silicate solution at room temperature and curing at 50 °C. The products were characterized by X-ray diffraction and ²⁹Si and ²⁷Al MAS-NMR. The results show that the secondary phases, at the concentration used in this work, do not prevent the geopolymerization reaction.     

Influence of moisture content on the contact angle and surface tension measured on birch wood surfaces

European Journal of Wood and Wood Products - Surface tension of solid wood surfaces affects the wettability and thus the adhesion of various adhesives and wood coatings. By measuring the contact...