陶瓷坯体增强剂聚丙烯酸钠在艺术瓷成形过程的应用

本文合成了一系列不同相对分子质量的聚丙烯酸钠,应用于艺术瓷的坯体中,研究了聚丙烯酸钠对艺术瓷坯体强度、变形率的影响,并对聚丙烯酸钠增强机理进行了探讨。结果表明:聚丙烯酸钠可有效地提高艺术瓷坯体的成形强度,减少了坯体的变形率,当增强剂c加入的质量分数为0.6%时,坯体的干燥强度增加率达167.5%,坯体的变形率从50%降低到10%。     

A survey of traffic-based routing metrics in family of expected transmission count for self-organizing networks

Self-Organizing Networks (SONs) are attractive for applications where flexibility, resilience, and a large network service area are required. In order to meet the requirements of those applications, the principal issue is to guarantee efficient routing in SONs. Hence, the design and selection of appropriate routing metrics is important. A mass of metrics have been proposed in the past several decades. Among all the metrics, Expected Transmission Count (ETX) has drawn the most attention. Since the proposal of ETX, many ETX-based or extended metrics have been proposed. ETX and its descendants compose the ETX family. This paper is an attempt to analyze, compare and summarize traffic-based routing metrics in the ETX family. Details of each routing metric are presented and analyzed. Some of our viewpoints on the principal for designing metrics in SONs are presented.     

带式输送机系统的设计与设备选型(一)

1通用带式输送机技术的发展情况 带式输送机与其他运输方式相比具有运距长，能力大，投资省，运费低，操作简单安全，管理维修容易，能耗低，污染小等优势而逐渐成为各行业物料搬运的主要手段。高强度的钢绳芯带式输送机因其为矿山开采和矿石输送工艺创造了十分有利的条件而在各种矿山外部输送中得到快速发展。近年来随着水泥厂规模迅速扩大，带式输送在水泥行业已成为矿石原料输送的首选方案。     

基于安全隔离的边界防护体系的设计与实现

本文针对电子政务信息系统的特点,设计了基于安全隔离的边界防护体系。将安全隔离技术应用到电子政务中,实现了数据的安全高效实时传输,形成了多方位的安全边界防护体系架构。     

削弱或抑制抗氧剂、光稳定剂作用的有关因素

介绍了削弱或抑制抗氧剂、光稳定剂作用的常见因素及实例，分析了防老化塑料制品发生提前老化现象的可能性和原因。     

二聚炔醇酸性介质缓蚀剂的合成与应用

对二聚炔醇化合物ＤＭＨ的合成、分子结构及缓蚀作用机理进行了论述。因ＤＭＨ化合物具有独特的分子结构，形成了稳定的络合体系及基团的屏蔽效应，增加了缓蚀被膜厚度及缓蚀体系的化学稳定性，实验证实ＤＭＨ是酸性介质中的高效缓蚀剂。     

Influence of Zn ion implantation on structures and field emission properties of multi-walled carbon nanotube arrays

The structures and field emission properties of multi-walled carbon nanotube arrays implanted with Zn+ by MEVVA ion implanter have been investigated.The results revealed that Zn+implantation induced structural damage and that the top of carbon nanotubes with multi-layered graphite structure were transformed into carbon nanowires with amorphous structure.Meanwhile,C:Zn solid solution was synthesized after Zn+ implantation.The turn-on field and threshold field were 0.80 and 1.31 V/μm,respectively for original...     

尿液喷浆造粒--生产复合肥的一种新工艺

简述了在团粒法工艺的基础上，用尿素熔融尿液或尿素车间二段蒸发器的尿液进行喷浆造粒生产复合肥的改造方案、改造内容、改造效果和投资情况。     

以888-JH为催化剂Na_2CO_3为碱源的脱硫技术

本文着重介绍以888-JH为催化剂,Na2CO3为碱源焦炉煤气(COG)湿式氧化法脱硫工艺的脱硫原理、影响因素,并介绍了现场试验结果。认定单独使用888-JH可以替代PDS+RTS获得脱硫效率99%以上和出口H2S含量小于5mg/m3的较佳脱硫效果。