自蔓延高温合成TiNi多孔体合金

为了开发新型的生体材料，本文对自蔓延高温合成TiNi多孔体合金——人造骨材料进行了研究。以单质钛粉和镍粉作原料，在氩气保护条件下，采用预热点燃模式和热爆模式制得了不同形态的多孔TiNi形状记忆合金。采用SEM和XRD分析了样品的孔洞特征和相组成，测试了其力学性能，并研究了合成条件参数与样品表面形貌和孔隙状态之间的关系。结果表明，用SHS法制备TiNi多孔体合金是可行的。     

Time stepping schemes for coupled displacement and pore pressurē analysis

 The paper investigates the performance of various time stepping schemes for coupled displacement and pore pressure analysis. A number of alternative forms of the automatic time stepping method proposed by Sloan and Abbo (1999a) are also presented. These alternative schemes use different updates for the displacements and pore pressures and also adopt different starting conditions for the iterations. The automatic schemes are compared with an implicit θ-method, as well as an explicit method, through analysis of a variety of problems involving undrained loading, drained loading, and consolidation for Mohr-Coulomb and critical state models. As expected, the numerical results confirm that the explicit scheme is neither accurate nor robust. Although the implicit θ-method is accurate and fast, it fails to give a solution in a number of cases where the time step is large. The automatic schemes are shown to be accurate, fast and generally robust. Two of the automatic schemes proposed never fail to furnish a solution for the cases considered. In addition, all the automatic schemes are able to constrain the time-stepping (temporal integration) error in the displacements and pore pressures to lie near a prescribed tolerance, provided the iteration error tolerance is properly chosen. For complex soil models, it is important that the latter is set sufficiently small in order for the schemes to be able to constrain the time-stepping error to lie within a prescribed tolerance. Dedicated to the memory of Prof. Mike Crisfield, for his cheerfulness and cooperation as a colleague and friend over many years.     

一种LCD显示控制器IP核的设计与验证

介绍了一种用于LCD显示控制芯片的设计和验证过程。设计中利用Verilog语言对LCD显示控制器进行了描述和设计。并通过了仿真验证。本LCD控制器具有很好的可移植性，稍作改动便可应用于不同类型和应用场合的LCD显示控制。     

光电双基区晶体管(PDUBAT)的器件模型

本文在考虑了晶体管的小注入效应和大注入效应以及基区宽变效应等因素后,首次用近似和简化的数学表示式和相应的等效电路,描述了光电双基区晶体管(PDUBAT)负阻形成的机理并使负阻区和谷值区的理论计算和实验结果一致性很好.     

碎煤齿环堆焊材料与工艺研究

通过对碎煤齿环的失效分析 ,找出了影响齿环寿命的因素及薄弱环节 ,并研制成功了最优成分的耐磨材料和堆焊工艺 ,显著提高了生产率和企业的经济效益     

水稻花后衰退珠心和胚乳发育初期Ca2+的超微细胞化学定位

应用焦锑酸盐沉淀技术对水稻花后衰退珠心和胚乳发育初期进行了Ca^2 的超微细胞化学定位。结果显示在初始衰退的珠心细胞中Ca^2 主要分布于液泡膜上和核内；在衰退中期的珠心细胞中，Ca^ 主要分布在核膜、液泡膜及质膜上；在严重衰退的珠心细胞，Ca^2 仅存在于液泡中。珠心降解的Ca^2 跨过胚囊壁，通过质外体向胚乳内运输；发育初期的胚乳细胞，Ca^2 主要位于胞间隙，线粒体和液泡中也有少量分布。讨论了Ca^2 与珠心PCD的关系。     

Differential K+ channel clustering activity of PSD-95 and SAP97, two related membrane-associated putative guanylate kinases

The molecular mechanisms underlying the clustering and localization of K+ channels in specific microdomains on the neuronal surface are largely unknown. The Shaker subclass of voltage-gated K+ channel alpha-subunits interact through their cytoplasmic C-terminus with a family of membrane-associated putative guanylate kinases, including PSD-95 and SAP97. We show here that heterologous coexpression of either sap97 or PSD-95 with various Shaker-type subunits results in the coclustering of these proteins with the K+ channels. Mutation of the C-terminal sequence (-ETDV) of the Shaker subunit Kv1.4 abolishes its binding to, and prevents its clustering with, SAP97 and PSD-95. Whereas PSD-95 induces plaque-like clusters of K+ channels at the cell surface; however, SAP97 coexpression results in the formation of large round intracellular aggregates into which both SAP97 and the K+ channel proteins are colocalized. The efficiency of surface clustering by PSD-95 varies with different Shaker subunits: striking Kv1.4 clustering occurs in > 60% of cotransfected cells, whereas Kv1.1 and Kv1.2 form convincing clusters with PSD-95 only in approximately 10% of cells.     

基于GIS技术的安徽省重大农业气象灾害测评系统总体设计

对《基于GIS技术的安徽省重大农业气象灾害测评系统》的总体设计方法作了概要介绍。该系统的建立主要是采用GIS技术，综合气候分析、遥感监测、地理环境影响评判等方法，提高对安徽省干旱、洪涝、低温冻害等重大农业气象灾害实时监测、趋势预测，以及对农业生产影响的分析评价结果的准确性。     

MIS型单晶硅液晶光阀

详细介绍了一种新颖、快速响应的金属－绝缘层－半导体构成的MIS型单晶硅液晶光阀的结构、工作机理、制作工艺和性能参数测试。液晶采用45°扭曲向列型混合场效应工作模式。所得到的光阀的极限分辨率为40lp／mm，口径40mm，最大对比度＞100：1，在930nm（△λ＝40nm）写入光灵敏度为20μW／cm2，响应时间为15ms。报道了该光阀在大屏幕投影显示中的应用。