Influence of post‐treatments on the properties of porous poly(vinyl alcohol) membranes

Porous poly(vinyl alcohol) (PVA) membranes were prepared by a phase‐inversion method. The influence of chemical crosslinking and heat treatments on the swelling degree, resistance to compaction, mechanical strength, and morphology of porous PVA membranes was extensively studied. The crosslinking degree and crystallinity of the membranes, calculated from IR spectra, increased with the treatment time. The porosity, calculated on the basis of swelling experiments, showed a decreasing trend for heat‐treated membranes but remained almost at a constant value for crosslinked membranes. Such a change was further proved with scanning electron microscopy pictures. The behavior was explained by the rearrangement of PVA chains during the heat‐treatment process, which led to morphological changes in the membranes. The mechanical properties of the porous membranes in dry and wet states were measured, and a great difference was observed between crosslinked and heat‐treated membranes in the dry and wet states. The crosslinked membranes showed good mechanical properties in the dry state but became fragile in the wet state. On the contrary, the heat‐treated membranes were more flexible in the wet state than in the dry state. This change was explained by the turnaround of inner stress in the systems during the swelling process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

导向剂加入方式对Y型沸石合成的影响

以煤系高岭土为原料,采用液态补硅手段调节体系SiO2/Al2O3、导向剂两步加入法合成了Y型沸石.考察了导向剂不同加入方式对Y型沸石合成的影响.采用合理的导向剂两步加入法,特别是通过控制导向剂第二步加入的时间,可明显缩短Y型沸石的晶化时间,并有效地减少P型沸石的生成.     

Syntheses and Structural Characterization of Triorganotin Derivatives of Bis(carboxymethyl)trithiocarbonate: X-ray Crystal Structures of 2D Network Polymers

Six triorganotin(IV) complexes of the type {(R₃Sn)₂[C₃S₃(COO)₂]}_n (R = C₆H₅ 1; n-Bu 2; PhCH₂ 4; p-F-PhCH₂ 5; o-F-PhCH₂ 6) and {(R₃Sn)₂[C₃S₃(COO)₂]}_n·[EtOH] (R = Me 3) have been synthesized by the reaction of bis(carboxymethyl)trithiocarbonate with triorganotin(IV) chloride in the presence of sodium ethoxide. All complexes were characterized by elemental analysis IR, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. Except for 4–6, all complexes were also characterized by X-ray crystallography. The X-ray date revealed that complexes 1–3 show two-dimensional network polymeric structure in which the geometries of tin atoms are trigonal bipyramid with the axial positions occupied by carboxylic oxygen atoms.     

港口起重机风灾事故的防范

介绍了港口起重机所受风害的种类及其设防情况,分析了起重机结构形式与风作用的关系。介绍了上海国际港务(集团)有限公司几种常用的大型起重机防风装置的原理、功效及检测情况。     

Composite group vector space method for estimating melting and boiling point of pure organic compound

Composition Group Vector Space (CGVS) method for estimating melting and boiling point T _m , T _b of organic compound has been proposed, and the principle of this method has been elucidated. The models for estimating T _m , T _b have been established and the numerical values of relative parameters have been presented. The average percentage deviations of T _m , T _b estimation are 7.53 and 1.58, respectively, which show that the present method demonstrates significant improvement in applicability to predict the above properties, compared to conventional group methods.     

Synthesis and aggregate formation of poly(styrenesulfonate)-b-poly(ethylene glycol)-b-poly(styrenesulfonate) triblock copolymers in aqueous solution induced by binding with aluminum ions

Summary  Well-defined water-soluble poly(styrenesulfonate)-b-poly(ethylene glycol)-b- poly(styrenesulfonate) (PSS-b-PEG-b-PSS) triblock copolymers with narrow molecular weight distribution (1.29 < M_w/M_n < 1.36) were synthesized in aqueous solution at 70 ^oC via reversible addition-fragmentation chain transfer (RAFT) polymerization. The complex formed by the PSS-b-PEG-b-PSS triblock copolymer coordinated with aluminum ion was investigated with turbidimetry, dynamic light scattering (DSL), zeta-potential, and transmission electron microscopy (TEM). The aggregation formation was based on the neutralization of the SO₃^- groups in the PSS blocks with Al³⁺ ions. The appearance, size and stability of the PSS-b-PEG-b-PSS/Al³⁺ aggregates were controlled by varying the PSS block length and degree of neutralization (DN). At DN = 0.33, where the PSS-b-PEG-b-PSS copolymer was completely neutralized with Al³⁺, the aggregate size increased with increasing PSS block length. The transition from the shrinking coil of small size to the interchain aggregates of large size was found at DN of about 0.33.     

探索小森

对于小森公司来说，最近几年在中国的销售业绩相当不错，小森印刷机在中国市场的占有率一直在稳步提高。中国的印刷市场正在高速增长，而小森能够取得如此佳绩，最根本的原因是积极应对世界印刷市场发展趋势，把深度满足用户的需求放在了首位，正如小森的企业理念——让客户感动。     

High-speed InGaP/GaAs HBTs with a strained InxGa1-xAs base

A self-aligned InGaP/GaAs heterojunction bipolar transistor with a compositionally graded In_xGa_1-xAs base has been demonstrated with f_T=83 GHz and f_max=197 GHz. To our knowledge, these results are the highest reported for both parameters in InGaP/GaAs HBT's. The graded base, which improves electron transport through the base, results in a DC current gain and a cutoff frequency which are 100% and 20% higher, respectively, than that achieved by an identical device with a nongraded base. The high f_max results from a heavily doped base, self-aligned base contacts, and a self-aligned collector etch. These results demonstrate the applicability of InGaP/GaAs HBT's in high-speed microwave applications