Application of nanostructured titanium dioxide pigments in paper coating: a comparison between prepared and commercially available ones

Nano-TiO₂ pigments in pure crystallographic anatase and rutile phases have been successfully prepared by hydrothermal at 120°C and hydrolysis methods, respectively. The laboratory-prepared pigments were characterized parallel to two commercial pigments of the same crystal structure. All pigments were applied in paper coating mixtures, and their influence on coated paper properties was systematically investigated. X-ray diffraction investigation showed that the laboratory-prepared pigments using the hydrothermal method at 120°C were pure anatase, whereas hydrolysis method produced pure rutile phase pigment. The application of the prepared nanopigments and the corresponding commercial TiO₂ phases in paper coating revealed that clay/rutile nano-TiO₂ pigments in paper coating mixture decreased coated paper roughness more than blending clay with anatase nano-TiO₂ pigments. Commercial nano-TiO₂ pigments increased porosity of coated paper at both the 30% and 50% addition of nano-TiO₂ pigments to clay, while laboratory-prepared nano-TiO₂ pigments highly decreased it at 30% addition of nano-TiO₂ to clay, compared to clay only. Blending of clay/nano-TiO₂ pigments improved both brightness and opacity of the coated paper where commercial pigments are more effective. Burst, tensile strength, stretching, and TEA were improved in the case of all pigments. The 50% addition of the prepared and commercial nanopigments in conjunction with clay improved the mechanical coated paper properties more than 30% addition (except the cases of stretching and TEA of the commercial pigments). The coated paper samples were offset printed. It was found that blending of clay/nano-TiO₂ pigments improved print density. Commercial nano-TiO₂ pigments improved print gloss more than the laboratory-prepared ones. This result was found consistent with the results of coated paper roughness.     

Quartz Ore Beneficiation by Reverse Flotation for Silicon Production

Silicon - In this work the reverse flotation as beneficiation process for high-purity silica valorization from Draissa quartz deposits (Algeria) is studied as a potential raw material for...     

Characterization of rheological and thermophysical properties of HDPE–wood composite

The objective of this study is to develop a new biocomposite material with high deformation ability. In this regard, the thermal, rheological, and thermophysical properties of this new composite were characterized as a function of temperature and filler concentration. High density polyethylene (HDPE) was the matrix of this new composite which was reinforced with six sawdust concentrations 0%, 20%, 30%, 40%, 50%, and 60%. Maleic anhydride grafted polyethylene (PE‐g‐MA) was used as coupling agent. Addition of sawdust with PE‐g‐MA increased significantly the complex viscosity, the storage modulus (G′), and loss modulus (G″) of the matrix. The superposition of the complex viscosity curves using temperature dependent shift factor, allowed the construction of a viscosity master curve covering a wide range of temperatures. Arrhenius law was used for the relationship of the shift factor to temperature. Furthermore, method of Van Gurp and Palmen (tan delta vs. G*) is also used to control the time–temperature superposition. The experimental results can be well fitted with the cross rheological model which allowed the prediction of the thermorheological properties of the composites over a broad frequency range. By increasing wood concentration, both the activation energy and relaxation time for the biocomposites determined using, respectively, the Arrhenius law and the cole–cole rule increased. By contrast, specific heat of the matrix decreased with sawdust addition while its dimensional stability improved. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40495.     

Modelling an insulated gate bipolar transistor using bond graph techniques

Simulators in power electronics are less developed than in other electronic fields. The main modelling methods are between the numerical simulation of semiconductor device equations that hardly simulate circuits, and equivalent circuit models that show poor accuracy. We propose the application of the bond graph techniques to model modular power semiconductor devices. Furthermore, the IGBT is a new power device which combines a bipolar transistor with a MOSFET transistor. We develop a new IGBT bond graph model. The bond graph techniques give us good primary simulation results. We present in this paper the principle and the results of this modelling method.     

Chemical Modification of Guaran Gum. Part 3: Carboxymethylation in non-Aqueous Medium

Guar gum was isolated from the seeds and subjected to modification via non-aqueous carboxymethylation. Highly substituted carboxymethyl guaran derivatives could be obtained via repeating the reaction four times, where a product of degree of substitution (D.S.) 2.07 was obtained indicating that the free hydroxyl groups of both glucose and mannose (which form the main constituents of guaran) can react with monochloro acetic acid. The modification increases the solubility of the gum in cold water, and increases the stability of its pastes to microorganisms. Pastes of these derivatives are characterized by non-Newtonian pseudoplastic behaviour regardless of their D.S. or the measuring temperature, while their apparent viscosity decreases by increasing the D.S. and/or the measuring temperature.     

Hypocholesterolaemic effect of yoghurt containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536

The effect of a yoghurt supplement containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536 on plasma lipids, lipid peroxidation and the faecal excretion of bile acids was examined in rats fed a cholesterol-enriched diet. After 8 weeks, the rats in the positive control (PC) group who were fed the cholesterol-enriched diet showed significant increases in plasma total cholesterol (TC), low-density lipoprotein (LDL) cholesterol, and malondialdehyde (MDA). However, groups fed a cholesterol-enriched diet supplemented with yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 had significantly lower plasma TC, LDL-C, very-low-density lipoprotein (VLDL) cholesterol, and MDA than had the PC group after 8 weeks of treatment. In addition, faecal excretion of bile acids was markedly increased in the rats fed the yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 as compared to the PC and NC groups.     

Organic solvent pretreatment to enhance enzymic saccharification of straw

Enzymic saccharification of wheat straw in the absence of any pretreatment was only about 20 %. Acid hydrolysis did not improve the overall cellulose enzymic breakdown, nor did pretreatment by flash autohydrolysis under pressure or sodium chlorite delignification. When wheat straw was treated with N-methyl-morpholine-N-oxide (MMNO) at J20°C for 20–30 min, this treatment and subsequent enzymic hydrolysis produced carbohydrate conversion of 73%. Similar results could be obtained by treating straw with 0·1 M sodium hydroxide. When MMNO treatment was combined with any other pretreatment, the saccharification yield was greatly enhanced. Nearly quantitative conversion was obtained by swelling straw in 0·1 M sodium hydroxide followed by MMNO treatment. The results show that lignin content of plant material does not represent the limiting factor to enzymic saccharification.     

Liquid‐phase axial dispersion of turbulent gas–liquid co‐current flow through screen‐type static mixers

This article discusses the characteristics of turbulent gas–liquid flow through tubular reactors/contactors equipped with screen‐type static mixers from a macromixing perspective. The effect of changing the reactor configuration, and the operating conditions, were investigated by using four different screen geometries of varying mesh numbers. Residence time distribution experiments were conducted in the turbulent regime (4500 < Re < 29,000). Using a deconvolution technique, the RTD function was extracted to quantify the axial/longitudinal liquid‐phase dispersion coefficient. The findings highlight that axial dispersion increases with an increasing flow rate and/or gas‐phase volume fraction. However, regardless of the number and geometry of the mixing elements, reactor configuration, and/or operating conditions, the recorded liquid‐phase axial dispersion coefficients in the presence of screens was lower than that for an empty pipe. Furthermore, the geometry of the screen was found to directly affect the axial dispersion coefficient in the reactor. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1390–1403, 2017     

Cold compaction of polyether-etherketone and nickel powder blends

This study deals with the cold compaction of polyether-etherketone (PEEK) and nickel powder blends. Four different types of PEEK powders which are commercially available from Imperial Chemical Industries (ICI) were utilized for this investigation. These PEEK powders included fine and coarse size powders of a low viscosity grade (150PF and 150P) and similar powders of a high viscosity grade (450PF and 450P). Each of the four different PEEK powders were blended with about 10 vol?% nickel powder (Novamet) using a dry mixing technique. These PEEK/nickel powder blends were then successfully compacted at room temperature. Green strengths as high as 39.5 MPa and 26.3 MPa were measured on nickel filled 150 grade and 450 grade compacts, respectively. The higher strength values of the nickel filled compacts compared to their respective unfilled ones were attributed to a higher degree of mechanical interlocking and plastic deformation, which was induced in the polymer particles during compaction by the hard nickel filler. These composites also exhibited lower viscoelastic recoveries than their respective unfilled compacts. Electrical resistivities as low as 0.06 ohm-cm were achieved by compacting 150P/nickel powder blends. This resistivity value agreed well with the calculated value predicted from the literature.     

Kinetic and Quality Study of Mushroom Drying under Microwave and Vacuum

Abstract

The aim of this work is to model the drying kinetics of mushrooms under several operational conditions, to evaluate the effective diffusivity coefficient of moisture removing by a drying model and inverse calculus method in finite differences and to study the effect on the final quality of dehydrated mushrooms. Different ways of microwave vacuum drying were compared to freeze-drying. Results show that a decrement of the applied pressure produces a certain increase in the drying rate together with a lower moisture in the dehydrated product at the end. Temperature control inside the sample helps to ensure a better quality in the dehydrated product, than when controlled at the surface. Diffusivity coefficients show a correspondence with product temperature during drying. The microwave dried samples obtained with moderate power and temperature control of product shown an important degree of quality similar to that obtained by freeze-drying.