The effect of copolymer composition on the surface properties of perfluoroalkylethyl acrylates

The surface properties of two perfluoroalkylethyl acrylic copolymers—aqueous, Zonyl^®329 and solvent‐based, Zonyl^®225—were studied. Zonyl^®329 is a water‐based dispersion and Zonyl^®225 a solvent‐based copolymer solution; both polymers have the same perfluoroalkyethyl side chains [F(CF₂)_nCH₂CH₂? ] but have different comonomer compositions. Thin films, prepared by dip coating onto mica and quartz, with and without annealing, were characterized by contact angle and by X‐ray photoelectron spectroscopy (XPS). The contact angle measurements showed little variation with polymer and with substrate, consistent with the supposition that the perfluoroalkylethyl chains aggregate on the surface and thus dominate surface properties, irrespective of the composition of the rest of the polymer. XPS revealed only small variations in surface chemistry for studied films. Annealed films showed improved segregation for solvent‐based Zonyl^®225, which has both hydrocarbon alkyl and perfluoroalkylethyl side chains; the presence of hydrocarbon alkyl chains enables the perfluoroalkylethyl chains to reorganize after annealing. Depending on the external conditions, this thermal treatment can enable more perfluoroalkylethyl chains to reach the film surface (solid/air interface), leading to a reduction in the dispersive‐dominant surface and enhancement in perfluoroalkylethyl segregation. This suggested that perfluoroalkylethyl side chains dominate the surface properties, which are thus not dependent on substrate, backbone composition, or formulation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Ignition and Charring of PVC-Based Electric Cables

Fire Technology - The ignition of four different PVC-based electric cables was studied using cone calorimeter and the influence of the charring phenomenon on ignition was investigated. The...     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

Evaluation of enrichment-free PCR-based detection on the rfbE gene of Escherichia coli O157--application to municipal wastewater

Escherichia coli O157 strains have emerged as important human enteric pathogens. Strains that express the O-antigen 157 are commonly associated with severe clinical manifestations, including bloody diarrhea, hemorrhagic colitis, and hemolytic uremic syndrome. E. coli O157 strains may be transmitted in a variety of ways, including food, water and person-to-person or animal-to-person contact. Fecal contamination is one source of environmental contamination and is responsible for the presence of these pathogens in the environment. We used a specific and sensitive PCR assay based on the rfbE gene to detect low levels of these pathogens in wastewater. The set of primers used was designed to amplify an intragenic segment of the rfbE gene. The amplification assay detected 200 CFU of E. coli O157 in pure water. The prevalence of E. coli O157 in the effluents of 44 wastewater treatment plants was determined (7%).     

Implicit Brushes for Stylized Line‐based Rendering

We introduce a new technique called Implicit Brushes to render animated 3D scenes with stylized lines in realtime with temporal coherence. An Implicit Brush is defined at a given pixel by the convolution of a brush footprint along a feature skeleton; the skeleton itself is obtained by locating surface features in the pixel neighborhood. Features are identified via image‐space fitting techniques that not only extract their location, but also their profile, which permits to distinguish between sharp and smooth features. Profile parameters are then mapped to stylistic parameters such as brush orientation, size or opacity to give rise to a wide range of line‐based styles.     

Impact of Blend Morphology on Interface State Recombination in Bulk Heterojunction Organic Solar Cells

This work is a reinvestigation of the impact of blend morphology and thermal annealing on the electrical performance of regioregular‐P3HT:PC₆₀BM bulk heterojunction organic solar cells. The morphological, structural, and electrical properties of the blend are experimentally investigated with atomic force microscopy, X‐ray diffraction, and time‐of‐flight measurements. Current–voltage characteristics of photodiode devices are measured in the dark and under illumination. Finally, the existence of exponential electronic band tails due to gap states is experimentally confirmed by measuring the device spectral response in the subband gap regime. This method reveals the existence of a large density of gap states, which is partially and systematically reduced by thermal annealing. When the band tails are properly accounted for in the drift and diffusion simulations, experimentally measured charge transport characteristics, under both dark and illuminated conditions and as a function of annealing time, can be satisfactorily reproduced. This work further confirms the critical impact of tails states on the performance of solar cells.     

Photoluminescence of hydrophilic silicon nanocrystals in aqueous solutions

Stable aqueous solutions of undecylenic-acid-grafted silicon nanocrystals (Si-nc) were prepared. The time evolution of the photoluminescence properties of these hydrophilic silicon nanocrystals has been followed on different timescales (hours and days). On a short timescale (hours), Si-nc tend to agglomerate while the PL lineshape and intensity are stable. Agglomeration can be reduced by using suitable surfactants. On a long timescale (days), oxidation of Si-nc occurs even in the presence of surfactants. These two observations render Si-nc very useful as a labeling agent for biosensing.     

Enhancement of optical processes in coupled plasmonic nanocavities [Invited

We present detailed experimental and numerical investigations of resonances in deep nanogroove gratings in metallic substrates. These plasmonic nanocavity gratings feature enhanced fields within the grooves that enable a large enhancement of linear and nonlinear optical processes. This enhancement relies on both localized and propagating surface plasmons on the nanopatterned surface. We show that the efficiency of optical processes such as Raman scattering and four-wave mixing is dramatically enhanced by plasmonic nanocavity gratings.