Electrosynthesized CuMgAl Layered Double Hydroxides as New Catalysts for the Electrochemical Reduction of CO2

In this study, new nanostructured CuMgAl Layered Double Hydroxide (LDH) based materials are synthesized on a 4 cm² sized carbonaceous gas diffusion membrane. By means of microscopic and spectroscopic techniques, the catalysts are thoroughly investigated, revealing the presence of several species within the same material. By a one-step, reproducible potentiodynamic deposition it is possible to obtain a composite with an intimate contact between a ternary CuMgAl LDH and Cu⁰/Cu₂O species. The catalyst compositions are investigated by varying: the molar ratio between the total amount of bivalent cations and Al³⁺, the amount of loading, and the molar ratios among the three cations in the electrolyte. Each electrocatalyst has been evaluated based on the catalytic performances toward the electrochemical CO₂ reduction to CH₃COOH at −0.4 V versus reversible hydrogen electrode  in liquid phase. The optimized catalyst, that is, CuMgAl 2:1:1 LDH exhibits a productivity of 2.0 mmol_CH3COOH g_cat⁻¹ h⁻¹. This result shows the beneficial effects of combining a material like the LDHs, alkaline in nature, and thus with a great affinity to CO₂, with Cu⁰/Cu⁺ species, which couples the increase of carbon sources availability at the electrode with a redox mediator capable to convert CO₂ into a C₂ product.     

Ionic‐Liquid Gating of InAs Nanowire‐Based Field‐Effect Transistors

Here, the operation of a field‐effect transistor based on a single InAs nanowire gated by an ionic liquid is reported. Liquid gating yields very efficient carrier modulation with a transconductance value 30 times larger than standard back gating with the SiO₂/Si₊₊ substrate. Thanks to this wide modulation, the controlled evolution from semiconductor to metallic‐like behavior in the nanowire is shown. This work provides the first systematic study of ionic‐liquid gating in electronic devices based on individual III–V semiconductor nanowires: this architecture opens the way to a wide range of fundamental and applied studies from the phase transitions to bioelectronics.     

Evidence for the Band‐Edge Exciton of CuInS2 Nanocrystals Enables Record Efficient Large‐Area Luminescent Solar Concentrators

Ternary I‐III‐VI₂ nanocrystals (NCs), such as CuInS₂, are receiving attention as heavy‐metals‐free materials for solar cells, luminescent solar concentrators (LSCs), LEDs, and bio‐imaging. The origin of the optical properties of CuInS₂ NCs are however not fully understood. A recent theoretical model suggests that their characteristic Stokes‐shifted and long‐lived luminescence arises from the structure of the valence band (VB) and predicts distinctive optical behaviours in defect‐free NCs: the quadratic dependence of the radiative decay rate and the Stokes shift on the NC radius. If confirmed, this would have crucial implications for LSCs as the solar spectral coverage ensured by low‐bandgap NCs would be accompanied by increased re‐absorption losses. Here, by studying stoichiometric CuInS₂ NCs, it is revealed for the first time the spectroscopic signatures predicted for the free band‐edge exciton, thus supporting the VB‐structure model. At very low temperatures, the NCs also show dark‐state emission likely originating from enhanced electron‐hole spin interaction. The impact of the observed optical behaviours on LSCs is evaluated by Monte Carlo ray‐tracing simulations. Based on the emerging device design guidelines, optical‐grade large‐area (30×30 cm²) LSCs with optical power efficiency (OPE) as high as 6.8% are fabricated, corresponding to the highest value reported to date for large‐area devices.     

Solution‐Processed GaSe Nanoflake‐Based Films for Photoelectrochemical Water Splitting and Photoelectrochemical‐Type Photodetectors

Gallium selenide (GaSe) is a layered compound, which has been exploited in nonlinear optical applications and photodetectors due to its anisotropic structure and pseudodirect optical gap. Theoretical studies predict that its 2D form is a potential photocatalyst for water splitting reactions. Herein, the photoelectrochemical (PEC) characterization of GaSe nanoflakes (single‐/few‐layer flakes), produced via liquid phase exfoliation, for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in both acidic and alkaline media is reported. In 0.5 m H₂SO₄, the GaSe photoelectrodes display the best PEC performance, corresponding to a ratiometric power‐saved metric for HER (Φ_saved,HER) of 0.09% and a ratiometric power‐saved metric for OER (Φ_saved,OER) of 0.25%. When used as PEC‐type photodetectors, GaSe photoelectrodes show a responsivity of ≈0.16 A W^?1 upon 455 nm illumination at a light intensity of 63.5 µW cm^?2 and applied potential of ?0.3 V versus reversible hydrogen electrode (RHE). Stability tests of GaSe photodetectors demonstrated a durable operation over tens of cathodic linear sweep voltammetry scans in 0.5 m H₂SO₄ for HER. In contrast, degradation of photoelectrodes occurred in both alkaline and anodic operation due to the highly oxidizing environment and O₂‐induced (photo)oxidation effects. The results provide new insight into the PEC properties of GaSe nanoflakes for their exploitation in photoelectrocatalysis, PEC‐type photodetectors, and (bio)sensors.     

A decentralized kinematic control architecture for collaborative and cooperative multi-arm systems

In this paper a two-layer decentralized framework for kinematic control of cooperative and collaborative multi-robot systems is developed. The motion of the system is specified at the workpiece level, by adopting a task-oriented formulation for cooperative tasks. The first layer computes the motion of the single arms in the system. In detail, the control unit of each robot computes the end-effector motion references in a decentralized fashion on the basis of the knowledge of the assigned cooperative task and the motion references computed by its neighbors. Then, in the second layer, each control unit computes the reference joint motion of the corresponding manipulator from the end-effector reference motion. The approach is, then, tested in simulation on a work-cell composed by several manipulators, and experimentally on a dual-arm kinematically redundant work-cell composed by industrial manipulators.     

Boosting Perovskite Solar Cells Performance and Stability through Doping a Poly‐3(hexylthiophene) Hole Transporting Material with Organic Functionalized Carbon Nanostructures

Perovskite solar cells (PSCs) are demonstrating great potential to compete with second generation photovoltaics. Nevertheless, the key issue hindering PSCs full exploitation relies on their stability. Among the strategies devised to overcome this problem, the use of carbon nanostructures (CNSs) as hole transporting materials (HTMs) has given impressive results in terms of solar cells stability to moisture, air oxygen, and heat. Here, the use of a HTM based on a poly(3‐hexylthiophene) (P3HT) matrix doped with organic functionalized single walled carbon nanotubes (SWCNTs) and reduced graphene oxide in PSCs is proposed to achieve higher power conversion efficiencies (η = 11% and 7.3%, respectively) and prolonged shelf‐life stabilities (480 h) in comparison with a benchmark PSC fabricated with a bare P3HT HTM (η = 4.3% at 480 h). Further endurance test, i.e., up to 3240 h, has shown the failure of all the PSCs based on undoped P3HT, while, on the contrary, a η of ≈8.7% is still detected from devices containing 2 wt% SWCNT‐doped P3HT as HTM. The increase in photovoltaic performances and stabilities of the P3HT‐CNS‐based solar cell, with respect to the standard P3HT‐based one, is attributed to the improved interfacial contacts between the doped HTM and the adjacent layers.     

Isoenzymes of wheat o-diphenolase revealed by column isoelectric focusing

Summary Common wheat o-diphenolase at different purification steps has been submitted to column isoelectric focusing electrophoresis. The fraction purified with calcium phosphate gel shows multiple forms focused at pI 3.60, 4.95, 6.80, and 9.60. The enzyme activity and the purification degree of the four enzymatic components obtained have been calculated. The major fraction recovered after purification by chromatography on DEAE-cellulose does not display other multiple forms; however, it has some enzymatically inactive proteins well separated in the pH-gradient. The enzymatic protein, focused at pI 9.60, thus achieves a 1753-fold purification over the crude extract. The application of the technique allows a characterization of the wheat o-diphenolase and its recovery in highly purified form.

---

Isoenzyme von o-Diphenoloxydase aus Weichweizen, identifiziert durch isoelektrisches Fokussieren über Säule

Zusammenfassung Weichweizen-o-Diphenoloxydasen verschiedener Reinigungsstufen wurden über eine Säule isoelektrisch focussiert. Das durch Calciumphosphatgel gereinigte Enzym (Fraktion C) zeigt 4 multiple Formen, focussiert bei pI 3,60; 4,65; 6,80 und 9,60. Die Aktivität und der Reinheitszustand von diesen vier Formen wurden berechnet. Die Fraktion C wurde durch Chromatographie über Cellulose weiter gereinigt. Die in größeren Mengen gewonnene Fraktion zeigte beim isoelektrischen Focussieren keine multiple Formen mehr, nur eine Trennung von enzymatisch inaktiven Proteinen beim pH-Gradienten. Das enzymatisch aktive Protein, focussiert bei pI 9,60, zeigte einen 1753 mal besseren Reinheitszustand als das Rohenzym. Die Anwendung dieser Technik erlaubt die Charakterisierung der Weichweizen-o-Diphenoloxydasen und ihre Gewinnung in einem hochgereinigten Zustand.