Analysis of surface integrity for minimum quantity lubricant—MQL in grinding

The quality of machined components is currently of high interest, for the market demands mechanical components of increasingly high performance, not only from the standpoint of functionality but also from that of safety. Components produced through operations involving the removal of material display surface irregularities resulting not only from the action of the tool itself, but also from other factors that contribute to their superficial texture. This texture can exert a decisive influence on the application and performance of the machined component. This article analyzes the behavior of the minimum quantity lubricant (MQL) technique and compares it with the conventional cooling method. To this end, an optimized fluid application method was devised using a specially designed nozzle, by the authors, through which a minimum amount of oil is sprayed in a compressed air flow, thus meeting environmental requirements. This paper, therefore, explores and discusses the concept of the MQL in the grinding process. The performance of the MQL technique in the grinding process was evaluated based on an analysis of the surface integrity (roughness, residual stress, microstructure and microhardness). The results presented here are expected to lead to technological and ecological gains in the grinding process using MQL.     

Infiltrating the zebrafish swarm: design,implementation and experimental tests of a miniature robotic fish lure for fish–robot interaction studies

Robotic fish are nowadays developed for various types of research, such as bio-inspiredrobotics, biomimetics and animal behavior studies. In the context of our research on the social interactions of the zebrafish Danio Rerio, we developed a miniature robotic fish lure for direct underwater interaction with the living fish. This remotely controlled and waterproof device has a total length of 7.5 cm with the same size ratio as zebrafish and is able to beat its tail with different frequencies and amplitudes, while following the group of living animals using a mobile robot moving outside water that is coupled with the robotic lure using magnets. The robotic lure is also equipped with a rechargeable battery and can be used autonomously underwater for experiments of up to 1 h. We performed experiments with the robot moving inside an aquarium with living fish to analyze its impact on the zebrafish behavior. We found that the beating rate of the tail increased the attractiveness of the lure among the zebrafish shoal. We also demonstrated that the lure could influence a collective decision of the zebrafish shoal, the swimming direction, when moving with a constant linear speed inside a circular corridor. This new robotic fish design and the experimental results are promising for the field of fish–robot interaction.     

The Cost of Environmental Constraints in Traffic Networks: Assessing the Loss of Optimality

Increasing numbers of hard environmental constraints are being imposed in urban traffic networks by authorities in an attempt to mitigate pollution caused by traffic. However, it is not trivial for authorities to assess the cost of imposing such hard environmental constraints. This leads to difficulties when setting the constraining values as well as implementing effective control measures. For that reason, quantifying the cost of imposing hard environmental constraints for a certain network becomes crucial. This paper first indicates that for a given network, such cost is not only related to the attribution of environmental constraints but also related to the considered control measures. Next, we present an assessment criterion that quantifies the loss of optimality under the control measures considered by introducing the environmental constraints. The criterion can be acquired by solving a bi-level programming problem with/without environmental constraints. A simple case study shows its practicability as well as the differences between this framework and other frameworks integrating the environmental aspects. This proposed framework is widely applicable when assessing the interaction of traffic and its environmental aspects.     

Evolutionary forwarding games in delay tolerant networks: Equilibria,mechanism design and stochastic approximation

In this paper, we apply evolutionary games to non-cooperative forwarding control in Delay Tolerant Networks (DTNs). The main focus is on mechanisms to rule the participation of the relays to the delivery of messages in DTNs. Thus, we express the success probability as a function of the competition that takes place within a large population of mobiles, and we characterize the effect of reward-based mechanisms on the performance of such systems. Devices acting as active relays, in fact, sacrifice part of their batteries in order to support message replication and thus increase the probability to reach the destination. In our scheme, a relay can choose the strategy by which they participate to the message relaying. A mobile that participates receives a unit of reward based on the reward mechanism selected by the network. A utility function is introduced as the difference between the expected reward and the energy cost, i.e., the cost spent by the relay to sustain forwarding operations. We show how the evolution dynamics and the equilibrium behavior (called Evolutionary Stable Strategy – ESS) are influenced by the characteristics of inter contact time, energy expenditure and pricing characteristics.We extend our analysis to mechanisms that the system can introduce in order to have the message delivered to the destination with high probability within a given deadline and under energy constraints which bound the number of released copies per message. Finally, we apply our findings in order to devise decentralized forwarding algorithms that are rooted in the theory of stochastic approximations. Thus, we demonstrate that the ESS can be attained without complete knowledge of the system state and letting the source monitor number of released copies per message only. We provide extensive numerical results to validate the proposed scheme.     

A Bayesian approach to estimate the marginal loss distributions in operational risk management

One of the main problems in operational risk management is the lack of loss data, which affects the parameter estimates of the marginal distributions of the losses. The principal reason is that financial institutions only started to collect operational loss data a few years ago, due to the relatively recent definition of this type of risk. Considering this drawback, the employment of Bayesian methods and simulation tools could be a natural solution to the problem. The use of Bayesian methods allows us to integrate the scarce and, sometimes, inaccurate quantitative data collected by the bank with prior information provided by experts. An original proposal is a Bayesian approach for modelling operational risk and for calculating the capital required to cover the estimated risks. Besides this methodological innovation a computational scheme, based on Markov chain Monte Carlo simulations, is required. In particular, the application of the MCMC method to estimate the parameters of the marginals shows advantages in terms of a reduction of capital charge according to different choices of the marginal loss distributions.     

Artificial institutions: a model of institutional reality for open multiagent systems

Software agents’ ability to interact within different open systems, designed by different groups, presupposes an agreement on an unambiguous definition of a set of concepts, used to describe the context of the interaction and the communication language the agents can use. Agents’ interactions ought to allow for reliable expectations on the possible evolution of the system; however, in open systems interacting agents may not conform to predefined specifications. A possible solution is to define interaction environments including a normative component, with suitable rules to regulate the behaviour of agents. To tackle this problem we propose an application-independent metamodel of artificial institutions that can be used to define open multiagent systems. In our view an artificial institution is made up by an ontology that models the social context of the interaction, a set of authorizations to act on the institutional context, a set of linguistic conventions for the performance of institutional actions and a system of norms that are necessary to constrain the agents’ actions.     

Classification of Fuzzy Mathematical Morphologies Based on Concepts of Inclusion Measure and Duality

Mathematical morphology was originally conceived as a set theoretic approach for the processing of binary images. Extensions of classical binary morphology to gray-scale morphology include approaches based on fuzzy set theory. This paper discusses and compares several well-known and new approaches towards gray-scale and fuzzy mathematical morphology. We show in particular that a certain approach to fuzzy mathematical morphology ultimately depends on the choice of a fuzzy inclusion measure and on a notion of duality. This fact gives rise to a clearly defined scheme for classifying fuzzy mathematical morphologies. The umbra and the level set approach, an extension of the threshold approach to gray-scale mathematical morphology, can also be embedded in this scheme since they can be identified with certain fuzzy approaches.

A multi-scale template method for shape detection with bio-medical applications

In this paper we present a novel methodology based on non-parametric deformable prototype templates for reconstructing the outline of a shape from a degraded image. Our method is versatile and fast and has the potential to provide an automatic procedure for classifying pathologies. We test our approach on synthetic and real data from a variety of medical and biological applications. In these studies it is important to reconstruct accurately the shape of the object under investigation from very noisy data. Here we assume that we have some prior knowledge about the object outline represented by a prototype shape. Our procedure deforms this shape by means of non-affine transformations and the contour is reconstructed by minimizing a newly developed objective function that depends on the transformation parameters. We introduce an iterative template deformation procedure in which the scale of the deformation decreases as the algorithm proceeds. We compare our results with those from a Gaussian Mixture Model segmentation and two state-of-the-art Level Set methods. This comparison shows that the proposed procedure performs consistently well on both real and simulated data. As a by-product we develop a new filter that recovers the connectivity of a shape.

Magnebike: A magnetic wheeled robot with high mobility for inspecting complex‐shaped structures

This paper describes the Magnebike robot, a compact robot with two magnetic wheels in a motorbike arrangement, which is intended for inspecting the inner casing of ferromagnetic pipes with complex‐shaped structures. The locomotion concept is based on an adapted magnetic wheel unit integrating two lateral lever arms. These arms allow for slight lifting off the wheel in order to locally decrease the magnetic attraction force when passing concave edges, as well as laterally stabilizing the wheel unit. The robot has the main advantage of being compact (180 × 130 × 220 mm) and mechanically simple: it features only five active degrees of freedom (two driven wheels each equipped with an active lifter stabilizer and one steering unit). The paper presents in detail design and implementation issues that are specific to magnetic wheeled robots. Low‐level control functionalities are addressed because they are necessary to control the active system. The paper also focuses on characterizing and analyzing the implemented robot. The high mobility is shown through experimental results: the robot not only can climb vertical walls and follow circumferential paths inside pipe structures but it is also able to pass complex combinations of 90‐deg convex and concave ferromagnetic obstacles with almost any inclination regarding gravity. It requires only limited space to maneuver because turning on the spot around the rear wheel is possible. This high mobility enables the robot to access any location in the specified environment. Finally the paper analyzes the maximum payload for different types of environment complexities because this is a key feature for climbing robots and provides a security factor about the risk of falling and slipping. © 2009 Wiley Periodicals, Inc.     

A systematic literature review on IoT-aware business process modeling views,requirements and notations

Software and Systems Modeling - The Internet of things has been adopted in several sectors both influencing how people work and enhancing organizations’ business processes. This resulted in...