Assessment of myocardial lesion size during in vitro radio frequency catheter ablation

We report our experience with a system that utilizes changes in several biophysical characteristics of cardiac tissue to determine lesion formation and to estimate lesion size both on and off-line in vitro during radio frequency (RF) energy delivery. We analyzed the reactive and resistive components of tissue impedance and tracked the change of phase angle during RF ablation. We correlated the amount of tissue damage with these and other biophysical parameters and compared them with off-line analysis. We found that there are irreversible changes in the reactive and resistive components of impedance that occurred during tissue ablation. The irreversible changes of these components are greater in magnitude, and correlate better with the size of lesions than that of impedance alone that is currently used. Numerically, the best single on-line and off-line correlation for combined perpendicular and parallel electrode orientation was with phase angle. On-line and off-line capacitance and susceptance correlations were essentially similar suggesting that they may be useful as lesion size predictors, given these parameter's persistent change without temperature sensitivity. This study indicates that it is technically feasible to assess lesion formation using biophysical parameters.     

Synchronous Full-Scan for Asynchronous Handshake Circuits

Handshake circuits form a special class of asynchronous circuits that has enabled the industrial exploitation of the asynchronous potential such as low power, low electromagnetic emission, and increased cryptographic security. In this paper we present a test solution for handshake circuits that brings synchronous test-quality to asynchronous circuits. We add a synchronous mode of operation to handshake circuits that allows full controllability and observability during test. This technique is demonstrated on some industrial examples and gives over 99% stuck-at fault coverage, using test-pattern generators developed for synchronous circuits. The paper describes how such a full-scan mode can be achieved, including an approach to minimize the number of dummy latches in case latches are used in the data path of the handshake circuit.     

Polarization control in a vertical cavity surface emitting laser submitted to optical feedback

We study experimentally and theoretically two polarization effects in a vertical cavity surface emitting laser submitted to optical feedback. In a first experiment, we obtain flips between two linearly polarized laser modes up to a frequency of 50 MHz using an external cavity with a polarizer. In a second experiment, polarization self modulation is demonstrated up to a frequency of 2.6 GHz, using a quarter wave plate instead. Numerical calculations, based on a four levels model for the active medium, show a good agreement with the experiments.     

Real‐time causal message ordering in multimedia systems

Messages that are sent to and received by multiple sites need to have a consistent order imposed by all sites. Causal ordering allows the cause and effect relations of messages to be maintained. This paper presents an algorithm that ensures that multimedia data with real‐time deadlines are delivered to the application layer in causal order. The algorithm is designed to ensure that any message that arrives at a destination site before its deadline will be delivered to the application before the message expires. In addition, by focusing on a form of causal ordering violations caused by “the triangle inequality”, this algorithm has a low overhead with respect to the amount of information that must be appended to each message. This revised version was published online in June 2006 with corrections to the Cover Date.     

Extending the Kernighan/Lin Heuristic for Hardware and Software Functional Partitioning

The Kernighan/Lin graph partitioning heuristic, also known as min-cut or group migration, has been extended over several decades very successfully for circuit partitioning. Those extensions customized the heuristic and its associated data structure to rapidly compute the minimum-cut metric central to circuit partitioning; as such, those extensions are not directly applicable to other problems. In this paper, we extend the heuristic for functional partitioning, which in turn can solve the much investigated codesign problem of partitioning a system's coarse-grained functions among hardware and software components. The key extension customizes the heuristic and data structure to rapidly compute execution-time and communication metrics, crucial to hardware and software partitioning, and leads to near-linear time-complexity and excellent resulting quality. Another extension uses a new criteria for terminating the heuristic, eliminating time-consuming and unnecessary fine-tuning of a partition. Our experiments demonstrate extremely fast execution times (just a few seconds) with results matched only by the slower simulated annealing heuristic, meaning that the extended Kernighan/Lin heuristic will likely prove hard to beat for hardware and software functional partitioning.     

CMOS scaling into the nanometer regime

Starting with a brief review on 0.1-μm (100 nm) CMOS status, this paper addresses the key challenges in further scaling of CMOS technology into the nanometer (sub-100 nm) regime in light of fundamental physical effects and practical considerations. Among the issues discussed are: lithography, power supply and threshold voltage, short-channel effect, gate oxide, high-field effects, dopant number fluctuations and interconnect delays. The last part of the paper discusses several alternative or unconventional device structures, including silicon-on-insulator (SOI), SiGe MOSFET's, low-temperature CMOS, and double-gate MOSFET's, which may lead to the outermost limits of silicon scaling     

PLC-RF diversity: channel outage analysis

Telecommunication Systems - Signals from indoor access points in a wireless fidelity suffer from high attenuation as a result of the thick walls and metal structures in the multilevel-storey...     

Superior Thermoelectric Performance of Textured Ca3Co4−xO9+δ Ceramic Nanoribbons

Calcium cobaltite Ca₃Co_4−xO_9+δ (CCO) is a promising p-type thermoelectric (TE) material for high-temperature applications in air. The grains of the material exhibit strong anisotropic properties, making texturing and nanostructuring mostly favored to improve thermoelectric performance. On the one hand multitude of interfaces are needed within the bulk material to create reflecting surfaces that can lower the thermal conductivity. On the other hand, low residual porosity is needed to improve the contact between grains and raise the electrical conductivity. In this study, CCO fibers with 100% flat cross sections in a stacked, compact form are electrospun. Then the grains within the nanoribbons in the plane of the fibers are grown. Finally, the nanoribbons are electrospun into a textured ceramic that features simultaneously a high electrical conductivity of 177 S cm⁻¹ and an immensely enhanced Seebeck coefficient of 200 µV K⁻¹ at 1073 K are assembled. The power factor of 4.68 µW cm⁻¹ K⁻² at 1073 K in air surpasses all previous CCO TE performances of nanofiber ceramics by a factor of two. Given the relatively high power factor combined with low thermal conductivity, a relatively large figure-of-merit of 0.3 at 873 K in the air for the textured nanoribbon ceramic is obtained.     

Intracellularly Degradable Hydrogen‐Bonded Polymer Capsules

The assembly of low‐fouling polymer capsules with redox‐responsive behavior and intracellular degradability is reported. Thiol‐containing poly(2‐ethyl‐2‐oxazoline) (PEtOxMA_SH) brushes are synthesized by atom transfer radical polymerization (ATRP) of oligo(2‐ethyl‐2‐oxazoline)methacrylate and glycidyl methacrylate (GMA) and subsequent ring‐opening reaction of the GMA. Sequential deposition of PEtOxMA_SH/poly(methacrylic acid) (PMA) multilayers onto silica (SiO₂) particle templates and crosslinking through disulfide formation yield stable capsules after the removal of the SiO₂ templates by buffered hydrofluoric acid (HF). The redox‐responsive nature of the disulfide crosslinking groups enables the degradation of these capsules under simulated intracellular conditions at pH 5.9 and 5 mm glutathione (GSH). Furthermore, capsule degradation is observed after incubation with dendritic (JAWS II) cells. Even at high capsule‐to‐cell ratios, PEtOxMA_SH capsules show only negligible cytotoxicity. Quartz crystal microgravimetry (QCM) studies, using 100% human serum, reveal that films prepared from PEtOxMA_SH exhibit low‐fouling properties. The degradation and low‐fouling properties are promising for application of PEtOxMA_SH films/capsules for the delivery and triggered release of therapeutics.     

The Dynamic Emission Zone in Sandwich Polymer Light‐Emitting Electrochemical Cells

In light‐emitting electrochemical cells (LECs), the position of the emission zone (EZ) is not predefined via a multilayer architecture design, but governed by a complex motion of electrical and ionic charges. As a result of the evolution of doped charge transport layers that enclose a dynamic intrinsic region until steady state is reached, the EZ is often dynamic during turn‐on. For thick sandwich polymer LECs, a continuous change of the emission color provides a direct visual indication of a moving EZ. Results from an optical and electrical analysis indicate that the intrinsic zone is narrow at early times, but starts to widen during operation, notably well before the electrical device optimum is reached. Results from numerical simulations demonstrate that the only precondition for this event to occur is that the mobilities of anions (μ_a) and cations (μ_c) are not equal, and the direction of the EZ shift dictates μ_c > μ_a. Quantitative ion profiles reveal that the displacement of ions stops when the intrinsic zone stabilizes, confirming the relation between ion movement and EZ shift. Finally, simulations indicate that the experimental current peak for constant‐voltage operation is intrinsic and the subsequent decay does not result from degradation, as commonly stated.