焊接的重要性

现在，电子制造行业必须满足无铅标准，并且已经取得了很大的进展，整个行业正在了解可靠的无铅方案。业内正在生产高性能无铅电路板，并且已经制订出无铅处理的新标准。本文重点介绍无铅焊接处理中的回流焊工艺考虑因素。[第一段]     

Three-dimensional localization of cochlear implant electrodes using epipolar stereophotogrammetry

Three-dimensional (3-D) localization of individual cochlear implant electrodes within the inner ear is of importance for modeling the electrical field of the cochlea, designing the electrode array, and programming the associated speech processor. A 3-D reconstruction method of cochlear implant electrodes is proposed to localize individual electrodes from two X-ray views in combination with the spiral computed tomography technique. By adapting epipolar geometry to the configuration of an X-ray imaging system, we estimate individual electrode locations in the least square sense without using a patient attachment required by an existing stereophotogrammetry technique. Furthermore, our method does not require any knowledge of the intrinsic and extrinsic parameters of the imaging system. The performance of our method is studied in numerical simulation and with patient data and is found to be sufficiently accurate for clinical use. The maximum root mean-square errors measured are 0.0445 and 0.214 mm for numerical simulation and patient data, respectively.     

Generating, capturing and processing supply current signatures from analogue macros in mixed-signal ASICs

Transient Response Testing is a powerful test technique for analogue macros in mixed-signal electronic systems which with some enhancement can be particularly useful for testing deeply buried circuit structures. Supply current testing is finding widespread application in the digital domain and its use in the analogue domain may lead to integrated test methodologies for mixed-signal systems. This paper shows that by utilizing both these techniques, and a low-cost test shell, deeply buried analogue macros can be partitioned, tested using Transient Response Testing and the resulting response accurately captured from the total device supply current. It also contains an analysis of the noise on the supply current, due to digital circuit activity during testing, and demonstrates a test response analysis technique which is insensitive to it.     

Finite field inversion over the dual basis

In this transaction brief we consider the design of dual basis inversion circuits for GF(2^m). Two architectures are presented-one bit-serial and one bit-parallel-both of which are based on Fermat's theorem. Finite field inverters based on Fermat's theorem have previously been presented which operate over the normal basis and the polynomial basis. However there are two advantages to be gained by forcing inversion circuits to operate over the dual basis. First, these inversion circuits can be utilized in circuits using hardware efficient dual basis multipliers without any extra basis converters. And second, the inversion circuits themselves can take advantage of dual basis multipliers, thus reducing their own hardware levels. As both these approaches require squaring in a finite field to take place, a theorem is presented which allows circuits to be easily designed to carry out squaring over the dual basis     

A FLAVOUR MODEL FOR BEER FERMENTATION

A new beer fermentation model is developed based upon fundamental knowledge of biochemical pathways. The model can be subdivided into a growth model, an amino acid model, and a flavour/aroma model. Experimentation allowed for accurate model parameter identification. The results demonstrate the capability to accurately describe batch beer fermentation dynamics.     

Rapidly tunable optical add-drop multiplexer utilising relaxed beam splitters

A polarisation-independent four-port electro-optic tunable filter in the 1530 nm wavelength regime utilising non-polarising relaxed beam splitters and strain-induced polarisation converters on LiNbO₃ with 16 nm tuning range and 46 ns tuning speed is reported.     

Wavelength tunable CW Raman fibre ring laser operating at 1486-1551nm

A continuous-wave, wavelength tunable Raman fibre ring laser has been demonstrated operating at 1485-1551 nm with peak output power of over 400 mW, pumped at 1420 nm by a 1.58 W fibre laser     

Estimation of co-channel signals with linear complexity

To increase wireless system capacity using co-channel signals and multiple receiver antennas, we develop the partitioned Viterbi algorithm (PVA). The PVA estimation complexity increases linearly with each additional co-channel signal rather than exponentially as it does with joint maximum-likelihood sequence estimation (MLSE). The estimation problem involves multiple signals simultaneously transmitted and observed through slow-fading, frequency-selective channels. Although transmission is assumed to be in bursts according to a time-division multiple-access scheme, more than one signal can occupy the same time and frequency slot (these signals are referred to as “co-channel” signals). Separation and estimation of the symbol bursts is accomplished by exploiting channel differences, PVA estimation consists of a set of Viterbi detectors, one per signal, that operate in parallel with cross-coupling to allow approximate interference cancellation by means of tentative decisions. The forward filter of a decision feedback equalizer (DFE) is used to “prefilter” received signals prior to PVA estimation. Prefiltering delays the energy of interfering signals so that tentative decisions become reliable enough to use. Simulation results show PVA performance remains near-optimal with respect to the performance of joint MLSE     

On-Line Error Detection for Bit-Serial Multipliers in GF(2m)

In this paper error detection is applied to four finite field bit-serial multipliers. It is shown that by using parity prediction, on-line error detection can be incorporated into these multipliers with very low hardware overheads. These hardware overheads are generally independent of m and comprise only a handful of gates, so for large values of m these overheads are particularly low. The fault coverage of the presented structures has been investigated by simulation experiment and shown to range between 90% and 94.3%.