红外测温技术在离心复合铸造轧辊生产上的应用

本文分析了离心复合铸造轧辊生产过程中离心机停机温度和时间对轧辊质量的影响 ,提出了用先进的红外测温技术来预报停机温度和时间 ,以实现微机监控适时停机 ,保证轧辊内外层熔合良好 ;同时指出了红外测温技术在离心复合铸造轧辊生产上的应用前景     

炉前包内冲废钢对灰铸铁组织和强度的影响

采用炉前包冲内冲废钢与孕育相结合的方法，研究了炉前包内冲废钢对灰铸铁组织和强度的影响。结果表明：冲废钢可以增加灰铸铁中初生奥氏体的数量，改变初生奥氏体枝晶的分布形态，强化灰铸铁孕育效果，有利于提高灰铸铁的强度。     

Fabrication and characteristics of novel microelectronic structures fabricated by plasma-based techniques

A number of novel microelectronic structures have recently been produced using plasma-based techniques such as plasma immersion ion implantation (PIII) and this paper describes the recent progress made in this area in our laboratory. Conventional silicon-on-insulator (SOI) substrates utilizing a buried silicon dioxide layer suffer from self-heating effects as device dimensions shrink to the deep-submicrometer regime. Novel SOI structures using dielectric materials with higher thermal conductance such as aluminum nitride and diamond-like carbon have been produced. In the area of high-k (dielectric constant) thin films, plasma nitridation conducted on materials such as zirconium dioxide improves the recrystallization and interfacial properties. In the conventional Smart-Cut™ or ion-cut technique, high-energy hydrogen implantation is performed to effect layer transfer. Low-energy (several hundred eVs) plasma hydrogenation has recently been conducted in conjunction with damage engineering to produce wafer splitting for layer transfer. This new process allows more flexible control of the depth of hydrogen accumulation and the location of layer cleavage.     

高速钢变质处理和电磁搅拌的研究现状及展望

变质处理和电磁搅拌是改善钢铁材料组织和性能的重要手段，综述了在高速钢领域变质处理和电磁搅拌的研究现状和进展，表明采用这一工艺技术，将为生产较廉价的高性能铸造高碳高速钢轧辊提供途径，为此还提出今后研究的方向。     

深冲汽车簿钢板织构的表述方法

利用晶体学性质,将深冲汽车薄板的两种主要特征织构表述于反极图之中,再利用织构定量技术便能简捷地分析深冲钢板的织构与深冲性能的关系。经验证,此法与ODF定量分析所得的结果一致。     

Extraction of Metal(Ti,V,Mo)-oxyl Cations by Monoacidic Phosphates and Phosphonates

The extraction of TiO~(2+),VO~(2+),VO_2~+ and MoO_2~(2+)by HDEHP,HEHEHP and HDTMPP was studiedrespectively.The orders of extraction ability for the three extractant systems are as follows:for TiO~(2+),VO~(2+):HDEHP>HEHEHP>HDTMPP;for VO_2~+, MoO_2~(2+):HDEHP< HEHEHP< HDTMPP.The experimental results were discussed from the point of view of extractant structures.     

显微组织对Ni-Cr合金热腐蚀行为的影响

采用机械合金化法和真空熔炼法制备了不同显微组织的Ni-20Cr（质量分数，％，下同）合金，并研究其在950℃，75％Na2SO4＋25％K2SO4（质量分数，下同）盐膜下的热腐蚀行为。结果表明：细晶的机械合金化Ni-20Cr合金热腐蚀后表面形成了单一连续的Cr2O3外氧化膜，有效地阻止了硫的向内扩散，延长了热腐蚀过程的孕育期，呈现出较普通晶粒尺寸的熔炼Ni-20Cr合金更好的抗热腐蚀性能。     

电磁搅拌对ZA-27合金凝固组织的影响

研究了保温电磁搅拌和间断性电磁搅拌对ZA27合金组织的影响，在保温凝固过程中进行电磁搅拌时，晶粒细化效果更明显。保湿搅拌温度存在搅拌效果最理想的临界值Tc。间断性电磁搅拌使得枝晶显著粒化，晶粒分布更加均匀。     

喷射成形技术在钢铁材料中的应用

本文简要介绍了喷射成形技术的原理、特点及其在钢铁材料中的应用概况 ,综述了各种喷射成形钢铁材料的研究现状及其产品发展状况     

埋弧焊机的单片机控制系统设计

设计了以MCS-51单片机为控制核心的埋弧焊机控制系统．实现焊接过程的实时控制，保证了焊接电流和电弧电压的自动调节。通过实际生产应用表明：该控制系统工作稳定可靠，焊接质量较好，能够满足生产要求。