Phase structure and vibrational spectra of rare-earth-oxide ceramics of Dy<Subscript>2(1−<Emphasis Type="Italic">x</Emphasis>)</Subscript>Tm<Subscript>2<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>3</Subscript>

Rare-earth-sesquioxide ceramics have been found to possess potential applications in solid-state lasers due to their excellent physical and chemical properties as well as low cost. In this paper, composite powders with the composition of Dy_2(1−x)Tm_2x O₃ were prepared by ball milling method and corresponding ceramics were obtained using the pressureless sintering technique. Phase structure and vibrational spectra were investigated using X-ray diffraction, Raman spectrometer, and FT-IR spectrometer. It is shown that the mixture of Dy₂O₃ and Tm₂O₃ converts to an ordered solid solution of body-centered cubic structure after heat treatment at 1,100 °C for 4 h. It is also found that the cell constants of ceramics decrease linearly with the increase of Tm₂O₃ content. Raman spectra analysis demonstrates that bond length plays a major role in determining the frequencies of Raman bands at high-frequency range and that peak positions exhibit a blue shift with the increase of Tm₂O₃ content due to decreasing cell constant. Similar phenomenon is also observed in infrared spectra, which shows linearly increasing infrared band frequency with decreasing cell volume. The ball milling method used for preparing composite powders and vibrational spectra analysis in this work provide some important references for the study of laser ceramics containing Dy₂O₃ and Tm₂O₃.     

Effect of grain boundary character on sink efficiency

The dependence of the width of void-denuded zones (VDZs) on grain boundary (GB) characters was investigated in Cu irradiated with He ions at elevated temperature. Dislocation loops and voids formed near GBs during irradiation were characterized by transmission electron microscopy, and GB misorientations and normal planes were determined by electron back-scatter diffraction. The VDZ widths at Σ3〈1 1 0〉 tilt GBs ranged from 0 to 24 nm and increased with the GB plane inclination angle. For non-Σ3 GBs, VDZ widths ranged from 40 to 70 nm and generally increased with misorientation angle. Nevertheless, there is considerable scatter about this general trend, indicating that the remaining crystallographic parameters also play a role in determining the sink efficiencies of these GBs. In addition, the VDZ widths at two sides of a GB show different values for certain asymmetrical GBs. Voids were also observed within GB planes and their density and radius also appeared to depend on GB character. We conclude that GB sink efficiencies depend on the overall GB character, including both misorientation and GB plane orientation.     

异形坯经压弧制成平面板坯的模拟研究

用有限元软件DEFORM-3D研究将异形板坯通过压弧方法制成平面板坯的过程,同时进行实物的物理模拟试验,再将模拟结果与试验后得到的板坯试样的平面形状进行对比分析,对比结果验证了有限元模拟方法的可行性和正确性。     

关于生态建筑节能策略探索与研究

建筑节能作为世界性的大趋势与大潮流，也是建筑事业发展的热点与终点之一。现代生态建筑多采用高密度节能技术，并将可持续发展理念融入建筑全寿命的过程中，倡导节材、节水、节能与环境保护。     

油气储量可升级性评价方法探讨

以油气预测储量区块为研究对象,提出利用升级难易程度指数值定量评价储量可升级性。研究认为,影响预测储量升级性的主要因素是储量品位,其他因素对储量升级性有影响,但影响程度相对较小。预测储量升级性可采用对主评因素、辅评(背景)因素、关联因素的因子赋值方法进行升级难易程度指数值计算,利用指数值大小确定可升级性及升级顺序。     

高职道路养护与管理专业课程体系优化讨论

通过公路养护行业岗位任务及人才需求信息市场调研,进行典型工作任务筛选和分析、转换,以甘肃交通职业技术学院道路养护与管理专业2016年人才培养模式为平台,对高职高专道路养护与管理专业的课程体系提出了优化建议。     

九种M~(2+)掺杂对NaYF_4:Yb,Er上转换红光的影响研究

本文通过水热法合成不同浓度M~(2+)掺杂的NaYF_4:18%Yb~(3+),2%Er~(3+)上转换发光材料。系统的探讨了九种二价金属离子掺杂以及不同掺杂浓度对材料的上转换红光强度的影响。利用扫描电子显微镜(SEM)、X射线衍射分析(XRD)、荧光光谱等测量手段对样品进行了形貌、晶相、发光性质的表征。2%掺杂浓度下全部离子对上转换发光均稍有增强;5%掺杂浓度下,Sr、Ca对上转换荧光的增强效果最为显著,Ni、Zn、Co稍有增强,而Mg、Cu、Mn、Ba均降低了发光;10%掺杂浓度下,Mg、Ca对上转换荧光的增强效果最为显著,Zn稍有增强,而Ni、Sr、Cu、Mn、Ba、Co均降低了发光。荧光光谱结果表明碱土金属掺杂对发光的增强效果优于过渡金属掺杂,过渡金属对材料形貌的改善效果优于碱土金属。二价金属离子对红光的增强效果明显优于绿光。