沉积方式与基体材料对TiN薄膜内应力的影响

本文研究了TiN薄膜在化学气相沉积、物理气相沉积(包括热灯丝离子镀和多弧离子镀)以及等离子增强化学气相沉积等不同生成条件下的内应力变化。并通过改变钢及硬质合金基体的化学成份和表面状态。考察了基体材料对薄膜应力的影响。在此基础上,对薄膜内应力的形成机制进行了分析讨论。     

变速箱结构设计专家系统技术的研究

结构设计是机械产品设计过程中的重要环节，解决结构设计的智能化不但可以缩短产品的设计周期，而且还可以降低成本，提高设计质量。专家系统是解决智能化设计的技术之一。本文讨论有关结构专家系统的几个关键技术，主要包括系统的控制策略，面积对象的知识表达方式及结构设计的并行设计     

Microwave spectra of CD3OH methanol

The microwave spectrum of CD₃OH has been studied over the 8 to 58 GHz region, and numerousb-type transitions have been assigned. Many of these belong toP subbranches which descend to the microwave region from subband origins lying much higher in the far-infrared, pass through zero frequency, and return upward again. Others are members ofb-typeQ branches which extend across the region. As well, variousa-typeK-doublet lines arising as transitions directly across the split levels of asymmetry doublets have been identified.     

紫草色素的研究

紫草色素原植物系紫草科Broaginaceae几种植物的根，又称紫根色素。该研究首次用人工栽培的硬紫草(Lithospermum erythrohizon Sieb.)的根，作了加工工艺和特性的研究。产品得率近1％，色价E 1^1Q5nm达150以，卫生指标符合有关规定，是种理想的脂溶性红色素。     

A millimeter-wave omnidirectional dielectric rod metallic gratingantenna

A new millimeter-wave omnidirectional dielectric rod metallic grating antenna is investigated theoretically and experimentally, in this paper. The radiation characteristics of the antenna are carefully investigated by a rigorous formulation for the TE₀₁-mode and TM₀₁-mode excitation in the Ka-band frequency range. Based on the analysis, an omnidirectional antenna excited by the TE₀₁ mode is designed and measured. The measured results are compared with theoretical predictions and good agreement is found. Extensive numerical results are given to establish some useful guidelines for the design of the omnidirectional antenna     

1477 nm LD泵浦掺铒光纤放大器的研究

报道了采用１４７７ｎｍ激光二极管（ＬＤ）泵浦的掺铒光纤放大器的实验结果。研究了放大器的增益和时域特性。对１５２０ｎｍ的信号光，获得了２３ｄＢ的增益，泵浦效率为２．２８ｄＢ／ｍＷ。低频脉冲信号经过放大器后未发生波形畸变。     

Nd：碲酸盐玻璃的光谱和激光性质

对比了各种激光玻璃的光谱性质，指出碲酸盐玻璃是一咱理想的激光介质，并资产在室温下实现了钛宝石激光器泵浦了Ｎｄ：碲酸盐块体玻璃的激光发射，激光阈值４．２０ｍＪ，斜率效率１４．７％。     

环件轧制中晶粒变化的计算机模拟

金属微观结构变化影响产品机械性能。本文将金属再结晶数学模型与三维热刚塑性有限元结合起来进行模拟计算，获得了环件轧制中晶粒变化的三维分布规律，及与以往不同的轧制力和力矩变化。所用方法有普遍适用性。     

COIL中BHP浓度对发生O_2(~1△)的影响

本文实验研究了BHP的浓度对产生O2（1△）的影响。实验结果表明：当BHP浓度大于3.5M时，Cl2利用率以及O2（1△）的产率将不依赖于BHP浓度的变化而变化，同时，实验结果表明，使用低浓度的BHP对COIL的操作是可行的。     

非晶硅基薄膜的等离子体刻蚀光发射谱检测

本文研究了采用锁定放大相干检测技术的等离子体光发射谱检测系统。用该系统检测了仅用CF4作为刻蚀气体刻蚀非晶硅基薄膜的等离子体光发射谱。分析了检测结果和刻蚀机理。