Workflow technology-based monitoring and control for business process and project management

In this paper the application of workflow technology to monitor, control and coordinate business processes and projects is proposed. The conceptual characteristics of processes and projects as well as their management needs in the functions of planning, execution, monitoring and control are compared. The general design of the proposed system is then developed, with an application example. The proposed monitoring and control system provides proactive tracking of the flow of work and information, and of the utilization and commitment of resources. The design supports hierarchical management of the project and/or business process, allowing concerned persons to visualize and to utilize it in different levels of abstraction, as necessary. The application of workflow technology also provides additional benefits in facilitating communication, documentation and re-utilization.     

Synthesis of polyurethane elastomers hypercross-linked by partially hydrated polyhydroxylated C60

Utilization of polyhydroxylated C₆₀ (fullerenols) in a condensation reaction with diisocyanated oligo(tetramethylene oxide) led to the successful fabrication of elastomeric poly (urethane-ether) networks. These polymer networks exhibit interesting thermal behavior at low temperatures, improved tensile strength and elongation at ambient temperatures, and enhanced thermal mechanical stability at high temperatures, as compared with those of the parent linear polyurethane analogues; or with the conventional oligo (tetramethylene oxide)-derived polyurethane elastomers cross-linked by trihydroxylated reagents (1,I,1-trismethylol propane) or tetrahydroxylated reagents (pentaerythritol). The presence of a limited quantity of water molecules in the condensation reaction of fullerenols with diisocyanated prepolymers modified the physical properties of the resulting elastomeric products with a notable increase in tensile strength, modulus, and Ts over those of elasotmers prepared under anhydrous conditions. These water molecules contributed effectively to the increase of the number of cross-linking centers during the reaction.     

Small bowel transplantation: current progress and clinical application

Total parenteral nutrition (TPN) is used routinely to maintain patients with the Short Bowel Syndrome (SBS). Until recently, TPN has been the only available therapeutic modality for patients with SBS. Currently, it is the treatment of choice for such individuals and occasionally, when the loss of bowel is extensive, it may be the only way of maintaining life. Unfortunately, TPN is expensive and markedly restrains an individual's lifestyle. Despite the overall success of TPN, the numerous risks associated with its use and the many complications of having an intravenous indwelling for years have served as the stimulus for alternative treatments such as small bowel transplantation (SBT). The first attempts at small bowel transplantation in clinical medicine were by Detterling almost 25 years ago. Patient death or graft loss in these early attempts was caused by the failure to control graft rejection and/or the inability to prevent Graft Versus Host Disease (GVHD). A stimulus for renewed clinical interest in SBT was provided by Starzl et al in 1988 with a report of prolonged graft survival without graft rejection or GVHD in a patient who was the recipient of a multivisceral graft consisting of the entire small bowel and other abdominal organs. Since 1964, 78 Small Bowel transplants have been performed in humans. Several variations of the multivisceral procedure in which the liver and the small bowel constitute the major components of the graft were adopted. The longest survival has been in a child who is still alive with a working graft for more than two years, as reported by Goulet from Paris in 1989. The introduction in SBT of the new immunosuppressive agent FK 506 had provided results which are superior to those achieved with Cyclosporine A (CsA). This latter observation prompted the Pittsburgh group to initiate a large series of isolated and composite intestinal grafts. The remarkable results have demonstrated the clinical utility of intestinal transplantation. This paper will try to summarize the history of the small bowel transplantation until the end of the year 1992, with the current progress in use today.     

Bit error simulation for π/4 DQPSK mobile radio communicationsusing two-ray and measurement-based impulse response models

An accurate software/hardware bit-by-bit error simulator for mobile radio communications is described. Simulation results in indoor and outdoor channels are compared with theoretical results. Bit error rate (BER) results in simulated frequency-selective fading channels generated by several channel models such as two-ray, constant amplitude, and simulated indoor radio channel impulse models (SIRCIMs) are presented. It is shown that BER is not only dependent on the RMS delay spread, but also on the distribution of temporal and spatial multipath components in local areas. An important result is that a two-ray Rayleigh fading model is a poor fit for indoor wireless channels and, if used, can underestimate the BER by orders of magnitude. A real-time bit error simulation of video transmission using the bit-by-bit error simulator is described. The simulator, called BERSIM, is shown to be a useful tool for evaluating emerging data transmission products for digital mobile communications     

WIPL: a program for electromagnetic modeling of composite-wire andplate structures

WIPL is a program which allows fast and accurate analysis of antennas. The geometry of any metallic structure (even a very large structure) is defined as a combination of wires and plates. WIPL's analysis features include evaluations of the current distribution, near and far field, and impedance, admittance and s-parameters. The program uses an entire-domain Galerkin method. Efficiency of the program is based on the flexible geometrical model, and sophisticated basis functions. In this paper, the basic theory implemented in the program, and some results concerning TV UHF panel antennas and large horn antennas are given     

Extrapolated galerkin time finite elements

A new time finite-element method based on the extrapolation technique and the Galerkin time finite-element method is presented. In this method, the second-order governing differential equations of motion for dynamic problems are rewritten as a set of first order differential equations in state space. The standard Galerkin method is then employed for the temporal discretization. The algorithm is first-order accurate only. Based on the first-order Galerkin time finite-element formulation, the extrapolation technique is introduced to improve the order of accuracy. It is achieved by expressing the numerical amplification matrix of higher-order algorithm as a linear combination of the basic amplification matrices evaluated at selected instances of time. The matrices are combined with different weighting factors. The pairs of the selected instance of time and the corresponding weighting factors are free parameters. Unconditionally stable higher-order accurate formulations can be derived by properly choosing the free parameters. Algorithms up to fourth-order accurate are presented in this paper. Detailed analyses on stability, numerical dissipation and numerical dispersion are also given. Comparisons of the present algorithms with some well-known time-integration methods are presented to demonstrate the versatility of the present method, in particular its accuracy in the higher-order formulations.     

Computer-aided design and analysis of direct-driven wheel motordrive

This paper presents the computer-aided design (CAD) and performance analysis of a novel direct-driven wheel brushless DC motor drive for electric vehicles (EVs). The proposed motor is a permanent magnet square-wave motor, whose rotor with rare earth magnets forms the exterior of the motor, which can be fitted with a wheel tire to realize the direct drive for each wheel of an EV. The interior stator with its windings is rigidly mounted onto the suspension and frame structure of the vehicle. In order to achieve the direct drive without any mechanical transmission for EVs, the wheel motor has been designed as a low-speed high-torque motor. The design and optimization of the motor geometry was achieved with the aid of finite-element electromagnetic field analysis. Simulation studies on the transient performance of the motor drive were also carried out. This involved the creation of the motor transient model and formulation of a motor control strategy to ensure the wheel motor drive runs efficiently in the entire permitted speed and load range. The application of CAD techniques in the design of this very unconventional drive is described in this paper     

Fracture characteristics of a burst tested maraging steel rocket motor case

A 0.3 m diameter, 2 m long and 0.0015 m thick, 18 nickel 1800 MNm^–2 grade maraging steel motor case was designed, fabricated and burst tested to gain experience for using the steel as booster case material in satellite launch vehicles. The bursting occurred at 15.2 MPa for which the effective hoop stress worked out to be 1754 MNm^–2 almost equal to the ultimate tensile strength (1764 MNm^–2) of the material in the solution treated and aged condition. The failure analysis revealed that the material failed due to normal tensile overload fracture. The burst test data was used to arrive at fracture mechanics parameters like crack size, gross section area stress and the stress for leak before bursting.     

Increased analytical precision in the hollow cathode discharge emission source by improved discharge current control.

A significant improvement in the precision of the hollow cathode as an emission source is reported. Precision of 1% or less has been observed several times over periods of several hours. An average long-term stability of 4.3% for Ll and 6.0% for Na in the emission signal from microsamples (less than 50 nL) deposited in the hollow cathode discharge source is reported. The improved precision is attributed primarily to the introduction of electronics that hold the discharge current more nearly constant and to the shielding of all wiring to the source from the power supply. A current-controlled switch that is capable of driving a hollow cathode discharge in either dc or pulsed mode is described. This switch is capable of generating current pulses as short as 2 microseconds through a resistive load and greatly improves the discharge stability and repeatability at turn-on in both the dc and pulsed modes. The characteristics of pulses produced by this switch are presented; however, analytical performance is reported only for the dc mode. Temporal current plots are presented for the new instrumentation and compared to plots taken with commonly used current-controlled power supplies. Instrumentation, operation, and sample preparation procedures are described. Typical temporal profiles of the emission signal from microsamples deposited in AI and stainless steel hollow cathodes are given.     

In utero exchange transfusion in homozygous alpha-thalassaemia: a case report

We report a case of homozygous alpha-thalassaemia with hydrops fetalis presenting at 22 weeks of gestation. In utero exchange transfusion was performed with maternal blood at 23 weeks. 25 weeks and 29 weeks of gestation. The fetus was delivered at 29 weeks of gestation without significant neonatal complication. Post-transfusion haemoglobin pattern after transfusion suggested that a total haematocrit of 0.52 may be the desired post-exchange transfusion haematocrit to aim for and the total haematocrit of haemoglobin A and haemoglobin Portland dropped approximately one percent per day.