金属镍电沉积中枝晶分形生长的研究

将分形几何与电化学原理相结合,通过改进的有限扩散凝聚模型(diffusion-limited aggregation,DLA),采用基于Microsoft Visual C 6.0的Open GL编程,对点电极为阴极进行二维电沉积时沉积产物的形貌进行了模拟.以环形金属镍为阳极,石墨为阴极,用自行设计的试验设备制备了二维的金属镍枝晶以验证模拟结果.结果表明,在保持电压恒定的条件下,镍沉积层的形貌特征为具有分形结构的枝晶,这与采用DLA模型模拟所得的二维枝晶形貌具有相似性,表明该模型对枝晶电沉积的实验研究具有很好的指导意义.     

数字水准仪的测量原理及测试精度分析

在电子水准仪的3种读数原理(相位法、相关法、几何法)中主要介绍了几何法,结合索佳电子水准仪SDL30M在实验场进行了视距长度测量、调焦质量、标尺前后左右倾斜和遮挡程度试验,并利用已有实验场进行了水准测量的对比实验,分析了上述实验结果,得到了以下几点结论:1)仪器实测精度与标称精度基本相符。2)视距测量误差与视距长度成正比,基本呈线形关系,100 m的视距长度误差一般不会达10 cm。3)调焦质量对观测成果(中丝读数)影响很小,但数据显示时间会相应延迟。4)在2°范围内标尺左右倾斜影响较小,一般在1 mm以内,超过2°误差迅速增大;标尺前后倾斜在2°范围影响较小,读数误差一般在0.2 mm以内,超过2°误差迅速增大。5)遮挡容许程度与距离有关,距离越近,容许遮挡率越低;距离越远,遮挡率越大。6)对某水准网对比测量表明采用该仪器完全可以满足工程二等水准测量要求,而且精度高、速度快。     

环保型木器涂料

介绍水性和紫外光固化两类环保型木器涂料及其研究进展。水性木器涂料主要为丙烯酸酯与聚氨酯两大类，其研究进展集中表现为乳液改性，包括自交联、共混共聚、微乳液等；紫外光固化木器涂料包括其光固化树脂、活性稀释剂和光引发剂的功能及进展；指出研究新型乳液以提高水性木器涂料涂膜的表面性能，开发新型原材料以降低紫外光固化木器涂料的成本、扩大适应范围将成为今后环保型木器涂料的研究重点。     

Properties of poly(n‐butyl methacrylate) prepared by reverse atom transfer radical polymerization in an aqueous dispersed system

Reverse atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) in waterborne media using Cu(II) complexes with azo initiators (i.e., reverse ATRP) was conducted. The influence of several factors, such as surfactant, catalyst, and reaction time, on the stability of the emulsion, the particle size, the morphology of the emulsion particles, and the control of the polymerization was investigated. The results showed great differences between ATRP and conventional emulsion polymerization, especially the nucleation mechanism and the kinetics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1542–1547, 2003     

五种化合物临界温度和临界压力的测定

The critical properties of five compounds,including propanal,butanal,1-pentanal,2-methel butanal and trimer of ethanal,were determined for the first time by a new capillary quick-flow method. The apparatus was improved with a capillary tube and checked with hexane and 1-heptene as standard reagents. The experimental results proved that the determination of critical properties by quick-flow method with a capillary tube apparatus was successful.     

激光诱导二甲基二乙氧基硅烷气相合成碳化硅超细粉

本工作首次采用有机硅试剂二甲基二乙氧基硅烷为反应物，进行了激光导气相反应，制备出平均粒径为４０ｎｍ的非晶ＳｉＣ粉末，粉末中Ｃ／Ｓｉ比随反应气流量的变化而变化。非晶ＳｉＣ粉末在１８７３Ｋ，氮气中退火１ｈ后转变为β－ＳｉＣ及α－ＳｉＣ，同时，粉末中部分氧杂质及自由碳脱出粉末。     

Perylene derivative sensitized multi-walled carbon nanotube thin film

Perylene-sensitized multi-walled carbon nanotubes (PV-MWNT) have been prepared by a π-stacking between nanotubes and perylene derivatives, N,N′-diphenyl glyoxaline-3,4,9,10-perylene tetracarboxylic acid diacidamide (PV). The resultant nanocomposites have been characterized by transmission electron microscope (TEM), UV-vis absorption, photoluminescence (PL) and photocurrent spectra. Long range ordering can be observed in the form of PV-MWNT via π-stacking by TEM. Red-shift in the optical spectra consisting of the UV-vis absorption and PL spectra with the attraction of PV on the surface of the MWNTs were observed. The evident quenching in PL spectra of PV-MWNT was ascribed to the absorption and transfer of recombination energy by MWNT. Photosensitivity spectra demonstrated an increasing photocurrent in the ultraviolet region and a broadening photosensitivity in the red spectral region for solar cells based on PV-MWNT.     

碳四烃类催化转化反应规律的研究

利用小型固定流化床实验装置,对C4烃类用催化裂化催化剂的催化转化反应规律进行了实验研究,考察了不同催化裂化催化剂、反应温度及空速对C4烃类催化转化反应的产物分布和组成的影响.实验结果表明,催化裂化催化剂对C4烃类具有一定芳构化和裂化性能,在适宜的反应条件下,可增产芳烃和丙烯.     

Effect of ethylene-propylene copolymer with residual PE crystallinity on mechanical properties and morphology of PP/HDPE blends

Morphology and mechanical properties of polypropylene (PP)/high density polyethylene (HDPE) blends modified by ethylene-propylene copolymers (EPC) with residual PE crystallinity were investigated. The EPC showed different interfacial behavior in PP/HDPE blends of different compositions. A 25/75 blend of PP/HDPE (weight ratio) showed improved tensile strength and elongation at break at low EPC content (5 wt %). For the PP/HDPE = 50/50 blend, the presence of the EPC component tended to make the PP dispresed phase structure transform into a cocontinuous one, probably caused by improved viscosity matching of the two components. Both tensile strength and elongation at break were improved at EPC content of 5 wt %. For PP/HDPE 75/25 blends, the much smaller dispersed HDPE phase and significantly improved elongation at break resulted from compatibilization by EPC copolymers. © 1995 John Wiley & Sons, Inc.     

碳化-冻融作用下钢筋混凝土梁承载力衰减分析

为了研究碳化-冻融环境对钢筋混凝土梁承载力的影响,对钢筋混凝土试验梁进行了多重循环碳化-冻融交替作用下的加速腐蚀试验,然后对完成腐蚀试验的钢筋混凝土梁进行抗弯荷载试验.通过荷载试验获得腐蚀梁的应变变化、裂缝发展及荷载位移曲线,分析碳化-冻融耦合作用对试验梁承载力衰减的影响.结果表明:荷载试验过程中腐蚀钢筋混凝土梁的跨中截面应变基本满足平截面假定,相同荷载下受腐蚀梁的跨中应变大于未腐蚀梁的应变值;与未腐蚀钢筋混凝土梁相比受腐蚀梁的裂缝出现的较早,裂缝较宽、数量较少;从试验梁的荷载-位移曲线可知同一级别荷载作用后梁体跨中位移值随碳化-冻融腐蚀周期的增加而增大,极限荷载随腐蚀周期的增加而降低.根据试验梁荷载试验的实测数据提出了钢筋混凝土梁在全寿命周期内承载力时变衰减系数的计算公式,并通过有限元模拟分析验证了其正确性,该系数可用于我国严寒区钢筋混凝土结构的承载力衰减模拟分析和评估,成果可为实际工程参考.