装备知识管理效用及实施策略分析

知识军事时代，知识逐渐成为战斗力提升的核心要素。武器装备的知识化管理，即装备知识管理，作为一种新的管理理念逐渐引起人们的重视，并将成为武器装备管理发展的新趋势。从探讨装备领域实施知识管理（knowledge management，KM）的重要性及目前装备工作中存在的现实问题出发，从提高装备决策质量、提升装备人才工作能力、防止装备知识流失、促进装备知识传递等方面分析了实施装备知识管理可能产生的效用。同时，还分析了装备知识管理实施的基本策略，以此为基础概括出了装备知识管理具有操作意义的实施步骤。     

Ionothermal synthesis of a three-dimensional zinc phosphate with DFT topology using unstable deep-eutectic solvent as template-delivery agent

A three-dimensional zinc phosphate compound with DFT topology, designated as ZnPO₄-EU1, has been synthesized by an ionothermal approach from the system HF-ZnO–P₂O₅-choline chloride-imidazolidone. Ethylenediamine, derived from decomposition of the imidazolidone component of the deep-eutectic solvent (DES) itself, is delivered to the synthesis and serves as an appropriate template for ZnPO₄-EU1. Experiments in which the synthesis conditions were varied showed that ZnPO₄-EU1 may be prepared over a wide molar ratio of P/Zn = 0.55–13.0. Powder X-ray diffraction patterns have been obtained at intervals to track the crystallization process of this material. The experimental data show that Zn₃(PO₄)₂ · 4H₂O (a dense phase) was first isolated from the DES after reaction for 1 h. Subsequently, the pure phase of ZnPO₄-EU1 was obtained with increasing crystallization time from 12 h to 72 h. The experimental results show that the nucleation and crystallization take place with relatively low levels of solvent degradation, demonstrating that zinc phosphate with a three-dimensional framework can be synthesized by in situ generation of an appropriate template using an unstable DES at high temperatures (150–200 °C).     

Polyetherimide substrates for future high density optical data storage

Polyetherimide (PEI) substrate for next‐generation high density optical data storage is fabricated and characterized. Cover‐layer incident or first‐surface recording configurations do not require optical properties of the substrate, which are the prerequisite conditions for the conventional material of polycarbonate (PC). Instead of the optical properties, good mechanical properties with a sufficient transcribability are required. Even though PEI has higher glass transition temperature than that of PC, a microscopic transcribability of PEI is comparable with PC by laminating a thermal insulation layer on the backside of a stamper to retard the heat flow. A macroscopic warpage of PEI substrate is smaller than that of PC substrates, which reduces tilt and servo burden. The lowest critical speed coupled with the flutter of PEI substrate is larger than that of PC substrate because of the mechanical properties of PEI. POLYM. ENG. SCI., 48:97–101, 2008. © 2007 Society of Plastics Engineers     

基于USB的155 Mb/s码型发生器的研制

介绍了一种带USB接口的光的155Mb／s码型发生器。伪随机码和其他格式的码型由PC产生通过USB接口进入双口RAM，再经串并变换后由光发射模块发射。该系统可方便地设定各种格式的码型，并同时具备光接口和电接口，可广泛应用于光通信各种实验中，具有重要的实用价值。     

建筑雷击电位分布模拟软件诞生

由天津城市建设学院联合天津中力防雷技术有限公司共同承担的“建筑物与构筑物雷击电位分布模拟系统开发与应用研究“课题是2D03年正式在建设部立项研究的科技项目．于2005年11月17日通过了建设部科技司委托天津建委组织的专家验收，专家组一致认为该项且研究成果在工程应用领域达到了国内领先水平，具有广泛地应用前景。该项目研制开发出雷击建筑物的计算软件，定量地分析雷击时，在建筑物钢筋网内形成的电位、电流和电磁场分布情况，从而为防雷设计提供了设置防雷装置的设备和依据，为防雷施工检测提出了施工要求、检测依据，并可辅助雷电事故分析。     

Formation mechanism of 21R AlN-polytypoids in aluminothermic reduction and nitridation process

Synthesis of 21R AlN polytypoids was investigated using Al and ultrafine SiO₂ powder in a flowing nitrogen atmosphere by means of thermal gravity (TG), differential scanning calorimeter (DSC), X-ray diffractometer (XRD) and scanning electronic microscope (SEM) linked with energy dispersive spectrometer (EDS). The results showed that the formation mechanism of AlN polytypoids was different from that in reaction sintering process using Si₃N₄, AlN, Al₂O₃ and other sintering additive as raw materials. It was suggested that firstly Al reduce SiO₂ into Si and is also nitrided into AlN, then AlN, Al₂O₃ and SiO₂ dissolve into silicon liquid until the AlN polytypoids precipitate in saturated liquid in a flowing nitrogen atmosphere at lower than 1700 °C.     

中美纳电子技术发展对比研究(续)

3 中美纳米技术经费支持对比 3．1 美国 NNI计划出台之前，美国政府对纳米技术研发的投入力度并不算大，如1997年投入约为1．16亿美元，比日本政府的投入（1．20亿美元）稍低，但也比除日和西欧国家之外的其他国家（包括中国、加拿大、澳大利亚、韩国、新加坡以及前苏联各共和国等）政府投入的总和（约0．71亿美元）高得多：NNI计划出台之后，美国政府对纳米技术研发的投入大幅度增加。2001年，美国政府纳米技术研发投入从2000年的2．70亿美元增加到4．22亿美元，净增1．52亿美元，年增幅达56．3％；2002年度美国政府的纳米技术投入预算为5．189亿美元，比2001年度约增长了23％。这种高增幅在美国政府其他方面的预算中并不多见。     

冰蓄冷系统运行经济性分析

建筑物的空调制冷系统采用蓄冷方式，可以节约运行费用，减少设备容量，转移用电高峰。蓄冷空调系统与常规空调系统相比，在运行的经济性方面有很多优点。因此开发了冰蓄冷系统运行经济性分析计算机软件，应用这套软件对实际工程项目进行分析，计算出各种冰蓄冷系统与相应常规系统的逐时耗电量、电费、全年运行费用和设备容量减少率等，并以图表的方式对两种系统的经济性作出综合的比较，能全面、直观的显示冰蓄冷系统的优点。     

Complementary effects of solid lubricants in the automotive brake lining

An experimental investigation was carried out to examine the tribological behavior of NAO (non-asbestos organic) type brake linings containing different volume ratios of graphite and antimony trisulfide (Sb₂S₃). A scale dynamometer was used for friction tests and particular emphases were given to the effect of applied pressure, sliding speed, and temperature on the coefficient of friction according to the relative amounts of the two solid lubricants. Results showed that the brake linings with both solid lubricants exhibited better friction stability and less speed sensitivity than the friction materials containing a single solid lubricant. In particular, the brake lining containing higher concentrations of graphite showed better fade resistance than others during high-temperature friction test.