过磷酸钙折流混合器的改进

由于绿原化工有限公司过磷酸钙装置生产能力由 6 70 t/ d(实物量 )提高到 84 0 t/ d,折流混合器负荷增大 ,出现折流环磨损加快等问题。采用若干技改措施 :扩大折流环内径、改变折流混合器喷射方向、采用新材料制作折流环 ,使折流混合器能满足 84 0 t/ d过磷酸钙生产的需要     

亚磷酸工业生产方法的研究

本文详细介绍了亚磷酸的合成方法和工艺流程,其中还介绍了优级亚磷酸中杂质的去除方法.     

50年来辽宁省不同等级舒适日数演变及空间区划分析

根据1964—2015年辽宁省23个气象站点的逐日平均气温、相对湿度及平均风速资料,采用人体舒适度指数法计算人体舒适度指数,在季尺度上分析辽宁省不同等级舒适日数演变情况及典型旅游城市最佳旅游期;运用旋转经验正交函数分解法(REOF),分析人体舒适度指数季尺度空间变化特征,并应用ArcGIS软件进行舒适区域划分。结果表明:①辽宁省多年平均冷不舒适日数呈降低趋势,舒适日数呈增加趋势,热不舒适日数也呈微弱增加趋势;舒适程度夏季＞秋季＞春季＞冬季;②除冬季外5座典型旅游城市均适宜旅游,夏季为最佳旅游期;其中,沈阳、本溪更适宜春季旅游,大连更适宜秋季旅游。③辽宁省四季舒适度变化情况可大致划分为辽西、辽中、辽东三个区域,具体划分情况随季节有相应变化,总体舒适度由辽宁东部向西部逐渐递减。     

超高密度磁记录的课题与展望

介绍了超高密度记录的研究开发状况 ,论述了垂直磁记录技术的课题以及采用TMR磁头的、记录密度为Subterabit in2 的记录 读出特性。作为高密度记录所必需的头 盘界面技术 ,提出了接触记录技术的课题 ,还就STM (Scanningtunnelingmicroscopy)存储器论述了未来超高密度技术     

Liquid-phase oxidation of toluene by molecular oxygen over copper manganese oxides

Copper manganese oxides (Cu–Mn oxides) were prepared by coprecipitation method and characterized by several techniques, such as X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and Temperature-programmed reduction (TPR). Catalytic activities of the Cu–Mn oxides were tested by the oxidation of toluene with molecular oxygen in liquid phase and solvent-free conditions. The molar ratio of Cu:Mn in catalyst was optimized to be 1:1 and thus the corresponding crystalline material was designated as Cu_1.5Mn_1.5O₄.     

企业如何建立可持续发展战略

简介“可持续发展战略”的来由和我国的具体要求,介绍国外企业可持续发展的动态,提出５点建议供企业参考。     

Preparation and characterization of porous carbon beads and their application in dispersing small metal crystallites

Porous carbon beads were prepared by the pyrolysis of poly(vinylidene chloride) beads that were synthesized by suspension polymerization. After prolysis treatment at 180–300 °C under argon stream, the polymeric beads were further carbonized at 1000 °C for 3 h under argon stream to acquire porous carbon beads, of which the specific surface area was about 1000 m²/g, and pore size was mainly in the width range of 0.8–1.2 nm. The carbon structure and surface chemical composition characterized by X-ray diffraction and X-ray photoelectron spectroscopy, depended on the preparation temperature and the relations between them were examined. The characterization of the carbon beads by scanning electron microscopy, atomic force microscopy presented the morphological structure of the carbon beads surface and a global view of pores. The dispersion of nickel crystallites on the carbon beads surface was characterized by electron microprobe analysis. This study reveals that uniform surface morphological structure leads to the fine dispersion of metal crystallites.     

PP/WSPET/ZnO三元共混合金的流变性研究

用CFT-500型毛细管流变仪研究了PP/WSPET/ZnO共混体系的流变性能。研究结果表明:PP/WSPET/ZnO共混合金为典型的假塑性流体,WSPET含量增加,流体产生不稳定流动的临界剪切速率增大。共混合金的表观黏度和零切黏度随WSPET含量和温度提高而减小。黏度对温度的依赖性随WSPET含量增加和剪切速率的增大而减小。     

传统法制备嗪草酮印迹聚合物

农药嗪草酮应用广泛,它的残留问题引起了人们的普遍关注,发展快速准确的检测方法势在必行。而分子印迹技术因其独特的优点使它成为痕量残留快速检测的一种较好的方法。采用传统法制备嗪草酮印迹聚合物,以甲基丙烯酸(MAA)为功能单体,N,N-亚甲基双丙烯酰胺为交联剂,甲苯为溶剂,在50℃时聚合得到选择性、吸附性最佳的印迹聚合物。