Crosslinking and grafting ethylene vinyl acetate copolymer with accelerated electrons in the presence of polyfunctional monomers

In this study, we have studied the effects of polyfunctional monomers (PFMs) on physical properties of ethylene vinyl acetate (EVA) copolymer crosslinked with electron beam (EB) or peroxides. The PFMs used were triallylcyanurate, triallylisocyanurate, trimethylolpropane trimethacrylate, zinc diacrylate, and ethylene glycol dimethacrylate. Using PFMs has led to (1) optimum cure time t ₉₀ decrease from 19′25″ to 17′30″–18′45″, (2) scorch time increase from 2′ to maximum 3′45″, (3) increasing the crosslink density of peroxide or EB-cured systems by increasing the efficiency of productive radical reactions. The most efficient PFM for EVA copolymer blends has been triallylisocyanurate. Tensile strength and tear strength of samples crosslinked with EB for all irradiation doses are significantly better than those obtained for samples crosslinked with peroxides (differences up to 190%). The results show that EB irradiation gave the best results     

Ultra dispersed particles of Fe(III) compounds in the strongly basic crosslinked ionic polymer-precursors for new sorbents and catalysts

The Mössbauer spectroscopy and SEM investigation shows that crosslinked ionic polymers containing strongly basic functional groups adsorb Fe(III)-containing cations from sulphate solution through the formation in the polymer phase of high dispersed particles of jarosite mineral type compounds. Using different procedures the particles sizes and morphology, their repartition on the surface and in the volume of the polymer granule, the composition of the “polymer-inorganic compound” structural units were modified that is important for sorbents and catalysts obtaining. On heating in water medium in a boiling water bath, a part of the jarosite type compounds in the polymer phase is converted into ultra fine β-FeOOH particles in superparamagnetic state and the rest, in relatively massive and magnetically ordered β-FeOOH particles. The higher is the content of the Fe(III) in the polymer phase, the shorter is the duration of heating in water for the appearance of relatively massive particles of β-FeOOH. The particles of the jarosite type compounds and of the β-FeOOH are formed both on the surface and in the volume of the polymer granule. Upon heating in water, a part of the Fe(III)-containing particles have migrated from the volume of the polymer granule to the surface. Thermogravimetric investigation (in an N₂ atmosphere) shows that on heating of the Fe(III)-containing polymer sample up to 900 °C, complicated processes take place.     

Optical,electrical and morphological properties of transparent binary doped polyaniline thin films synthesized by in situ chemical bath deposition

The development of polymeric thin films has attracted attention in the optoelectronics field due to their transparency. The aim of the research presented was to obtain transparent polyaniline thin films by easy in situ oxidative polymerization of aniline with ammonium persulfate in the presence of a binary doping agent–poly(vinyl alcohol) mixture. Poly(acrylic acid), 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid or sodium dodecylsulfate were mixed with hydrochloric acid to form the binary doping agents. Polyaniline thin films were produced during aniline polymerization on Corning glass slides immersed in the mixture in order to study their optical, electrical and morphological properties. The optical absorption coefficient and the energy band gap were evaluated by optical transmission of the films in the UV‐visible spectral region. The optical absorption coefficient of all polyaniline films was of the order of 10⁴ cm^?1 with a maximum transmittance up to 80% at 550 nm. In order to investigate the effect of the mixture on the surface morphology and roughness of the films, atomic force microscopy was used. In general, surface roughness was reduced threefold by adding a mixture and optical transmission was increased by 20–30% without significantly affecting the absorption coefficient and the band gap of polyaniline. Islands and needle‐like structures on the film surfaces were obtained from various mixtures affecting the conductivity; for example, 0.17 S cm^?1 was obtained from needle‐like morphology, while 1.9 × 10^?4 S cm^?1 was obtained from island morphology. Raman spectroscopy studies confirmed the presence of poly(vinyl alcohol) in the thin films. Copyright © 2011 Society of Chemical Industry     

Interactive visual supports for children with autism

Interventions to support children with autism often include the use of visual supports, which are cognitive tools to enable learning and the production of language. Although visual supports are effective in helping to diminish many of the challenges of autism, they are difficult and time-consuming to create, distribute, and use. In this paper, we present the results of a qualitative study focused on uncovering design guidelines for interactive visual supports that would address the many challenges inherent to current tools and practices. We present three prototype systems that address these design challenges with the use of large group displays, mobile personal devices, and personal recording technologies. We also describe the interventions associated with these prototypes along with the results from two focus group discussions around the interventions. We present further design guidance for visual supports and discuss tensions inherent to their design.     

The improvement of the resistance to Candida Albicans and Trichophyton interdigitale of some cotton textile materials by treating with oxygen plasma and chitosan

This paper presents the improvement of the resistance to fungi of some cotton textile materials by treating in the manufacturing process with oxygen plasma and chitosan. Thus, after the weaving and preliminary finishing, the fabrics were cleaned in oxygen plasma atmosphere and after dyeing, have been treated with chitosan solution with concentrations of 1 or 5 g/l, in order to confer them antimicrobial properties. The antimicrobial tests were performed with two fungi: Candida albicans and Tricophyton interdigitale. The obtained antimicrobial effect was considerably higher compared to that of the raw fabrics. The colour resistance of dyed fabrics was not significantly influenced by applying the treatment-based chitosan.     

Reduction of Cu(II) to Cu(I) in solid CsCuCl3

The solid state reaction Cu + Cu²⁺ → 2Cu⁺ in CsCuCl₃ was studied at 499 K using a cell in which the Cu(II) sample was put between two copper discs. Mass changes, thickness of the product layer and the total electrical resistance of the cell were measured as a function of time, both with and without (spontaneous) applied voltage.