New Robust Stability Criteria for Lur’e Systems with Time-varying Delays and Sector-bounded Nonlinearities

This paper deals with a robust stability problem for uncertain Lur’e systems with time-varying delays and sector-bounded nonlinearities. An improved delay-dependent robust stability criterion is proposed via a modified Lyapunov-Krasovskii functional (LKF) approach. Firstly, a modified LKF consisting of delay-dependent matrices and double-integral items under two delay subintervals is constructed, thereby making full use of the delay and its derivative information. Secondly, the stability criteria can be expressed as convex linear matrix inequality (LMI) via the properties of quadratic function application. Thirdly, to further reduce the conservatism of stability criteria, the quadratic generalized free-weighting matrix inequality (QGFMI) is used. Finally, some numerical examples, including the Lur’e system and the general linear time-delayed system, are presented to show the improvement of the proposed approach.

     

Microstructure and erosion resistance of in-situ SiAlON reinforced BN-SiO<Subscript>2</Subscript> composite ceramics

BN-SiO₂-SiAlON composite ceramics were successfully prepared by the means of hot pressed sintering. Xe plasma flow generated by Hall Thruster was used for sputtering the surface of the samples in order to evaluate the plasma erosion resistance. XRD, TEM, SEM, and LSCM were used to characterize the phase composition and morphologies of as-made composite ceramics before and after Xe plasma erosion. The ceramics were composed of h-BN, fused silica, and SiAlON, which maintained structural stability during the process of Xe plasma sputtering. In conclusion, comparing with BN-SiO₂ composite ceramics, the plasma erosion rate of BN-SiO₂-SiAlON composite ceramics decreases significantly at first then rises with the increase of AlN addition. Erosion pits can be observed by using SEM on the surface after plasma sputtering, which demonstrates that the BN grains have dropped off the surface. In addition, mechanical denudation by high-speed Xe ions is recognized as the injury mechanism for the BN-matrix composite materials.     

基于溶剂沥青的冷再生沥青混合料性能评价

传统的沥青混合料冷再生技术有乳化沥青和泡沫沥青冷再生,本研究尝试采用所开发的溶剂沥青作为结合料对废旧沥青混合料进行冷再生,提出了试件的成型和养生方法,进行了配合比组成设计并采用热拌沥青混合料的标准对溶剂沥青冷再生混合料的性能进行评价.试验结果表明,溶剂沥青冷再生混合料的水稳定性能、高温稳定性能均满足我国热拌改性沥青混合料规范的性能要求,低温性能虽然不满足改性沥青混合料的要求,但能满足普通沥青混合料规范的性能要求.     

乌伦古坳陷断裂特征及其构造演化过程

利用现有二维地震资料进行断裂解释,识别乌伦古坳陷主断裂及其衍生断裂的的展布特征,分析断裂形成的力学背景。乌伦古东断裂和吐孜托依拉断裂是主要的控坳断裂,属于逆冲推覆类型的断裂;伦2井南断裂是以逆冲推覆为主、走滑为辅的断裂。根据乌伦古坳陷中生代沉降中心的演化特点,认为在印支和燕山期乌伦古坳陷东北缘所受挤压力强于西北缘。     

Analytical investigation on thermal-induced warpage behavior of ultrathin chip-on-flex (UTCOF) assembly

The serious warpage issues of ultrathin chip-on-flex (UTCOF) assembly induced by mismatched thermal stresses have greatly affected the mechanical stability and reliability of emerging ultrathin chip packaging technology. Currently, a theoretical prediction as a convenient and straightforward approach is still lacked for describing effectively the thermal-mechanical behavior of UTCOF during the adhesive curing and cooling process. In consideration of the adhesive thickness approximating to ultrathin chip and flexible substrate thickness, we develop a layerwise-model of ultrathin chip-adhesive-flex structure under plain strain condition, where the behavior of thick adhesive bonding can be described precisely through increasing the subdivided mathematical plies. Further, the analytical results show that the concave and convex forms of ultrathin chip warpage yield at the end of the curing and cooling process respectively. Meanwhile, the effects of its structure dimensions and material properties are also revealed for discussing a way to relieve the extent of ultrathin chip warpage. Additionally, in order to verify the validity of the theoretical prediction, we also introduce the corresponding numerical technique and experimental method. These results suggest that a kind of rigid and ultrathin flexible substrate such as metal foil should be adopted for small warpage of ultrathin assembly.     

Introduce Dissipation for Cylindrical Structures with Moon-Pool of Restricted Entrances

In order to consider the viscous effect,the introduction of a parametric dissipation and new results are realized by applying the new formulation combining and dynamic conditions over the free-surface with viscous terms. The dispersion equation is then modified by assuming an additional term in the boundary condition at the free-surface and wave-number becomes complex number with a small imaginary part which ensures the decay of wave amplitudes. The comparisons of numerical results and model test measurement on wave elevation at the moon-pool center is obtained both for the peak period and for the amplitude at resonance by choosing an appropriated dissipation coefficient. The results show that the introduce dissipation is not only effective but also reliable to provide realistic predictions.     

500kV复合绝缘子红外测温诊断分析

本文介绍了山东电网一起红外测温发现的500kV复合绝缘子外护套损坏案例,分析了损坏的原因,阐述了红外测温带电测试技术诊断复合绝缘子内部缺陷的机理和判别方法,测温结果及实验室试验表明红外成像法能够有效地检测出缺陷复合绝缘子,并给出了提高复合绝缘子安全运行水平的措施和建议。     

A (4-fluorophenyl)(phenyl)phosphine oxide-modified epoxy resin with improved flame-retardancy,hydrophobicity, and dielectric properties

The compound (4-fluorophenyl)(phenyl) phosphine oxide (4-FPO) was designed, synthesized, and used in the modification of epoxy resin (EP). The 4-FPO-modified EP was prepared by curing the reaction mixture of diglycidyl ether of bisphenol A (DGEBA) and 4-FPO in the presence of 4,4′-diaminodiphenylsulfone (DDS). Compared with the unmodified EP, the limiting oxygen index value of the EP/4-FPO-0.6 (4-FPO-modified EP with 0.6 wt% of phosphorus) increased to 31.6%, and the sample achieved UL-94 V-0 rating. The peak of the heat release rate, average of the heat release rate, and total heat release of EP/4-FPO-0.6 were reduced by 39, 24, and 19%, respectively. Mechanism study showed that the quenching effect in the gas and barrier effect in the condensed phase were responsible for the enhanced flame-retardant properties of the 4-FPO-modified EP. The results showed that hydrophobicity and dielectric properties of the modified EP were clearly improved.     

粉末注射成形Fe-50%Ni软磁合金

Fe-50%Ni合金是一种典型的高磁导率和低矫顽力的软磁材料,有着广阔的应用前景.本次实验以羰基铁粉和羰基镍粉为原料粉末,采用注射成形方法制取Fe-50%Ni软磁合金,研究了高能球磨制备粉末对注射成形工艺以及材料性能的影响.研究结果表明与未经过高能球磨的混合粉末相比,高能球磨改变了原料粉末的粒度和粒度组成,提高了粉末的振实密度,进而提高了装载量.通过显微组织分析得知,高能球磨能使两种粉末发生塑性变形并冷焊合,形成了复合粉,促进了两种成分之间发生扩散和固态反应,同时还增加了粉末颗粒的能量,使颗粒表面活化,促进了烧结,提高了烧结材料的致密度.本实验最终获得了高性能的软磁合金材料磁导率41.27 mH/m,饱和磁感应强度1.498 T,矫顽力7.533 A/m.所得到的软磁材料性能优于相应传统粉末冶金方法获得的材料性能.