Fringe field switching of a twisted nematic liquid crystal device for a single-cell-gap transflective display

We propose an optical configuration of a twisted nematic liquid crystal device driven by a fringe field for a single-cell-gap transflective display. The dark state of the reflective part is realized by a nematic liquid crystal layer with a twist angle of 63.6 degrees and retardation of 194 nm, while a quarter-wave plate is inserted for the dark state of the transmissive part. Wavelength dispersion of the liquid crystal layer is suppressed by introducing a half-wave plate. Different directions of electric fields rotate liquid crystals to 15 degrees for the bright state of the reflective part, but to -30 degrees for that of the transmissive part. With the proposed configuration, we can realize a high-brightness single-gamma transflective display in a single-cell-gap structure without any in-cell retardation layers.     

A router-assisted session tree configuration mechanism for reliablemulticast

A session tree based mechanism provides an efficient method to avoid well-known feedback implosion. However, it is not easy to configure an efficient session tree for IP multicast because it does not provide any explicit membership and routing topology information to the upper layer protocol. Incongruity between a session tree built on the transport layer and the corresponding routing tree on the network layer would incur large cost to handle control messages. This problem can be solved if a router that knows the information of routing topology can support the configuration of a session tree. Thus this letter proposed a router-assistant mechanism which minimizes the change of router functions and allows the routers to assist in providing a reliable multicast transport service     

Thermally conductive polyamide 6/carbon filler composites based on a hybrid filler system

We explored the use of a hybrid filler consisting of graphite nanoplatelets (GNPs) and single walled carbon nanotubes (SWCNTs) in a polyamide 6 (PA 6) matrix. The composites containing PA 6, powdered GNP, and SWCNT were melt-processed and the effect of filler content in the single filler and hybrid filler systems on the thermal conductivity of the composites was examined. The thermal diffusivities of the composites were measured by the standard laser flash method. Composites containing the hybrid filler system showed enhanced thermal conductivity with values as high as 8.8 W (m · K)⁻¹, which is a 35-fold increase compared to the thermal conductivity of pure PA 6. Thermographic images of heat conduction and heat release behaviors were consistent with the thermal conductivity results, and showed rapid temperature jumps and drops, respectively, for the composites. A composite model based on the Lewis–Nielsen theory was developed to treat GNP and SWCNT as two separate types of fillers. Two approaches, the additive and multiplicative approaches, give rather good quantitative agreement between the predicted values of thermal conductivity and those measured experimentally.     

Dispersion polymerization in supercritical carbon dioxide using comb-like fluorinated polymer surfactants having different backbone structures

Comb-like fluorinated polymers with different backbone structures, poly(heptadecafluorodecyl acrylate) (PA-R_f), poly[oxy[(2-perfluorooctylethylene)thiomethyl]ethylene] (PEO-R_f), and poly[p-[[(perfluorooctylethylene)thio]methyl]styrene] (PS-R_f), were used as surfactants in dispersion polymerization to examine the effect of backbone structure on the formation of polymer particles. Dispersion polymerization of monomers with different polarities using these comb-like fluorinated polymer surfactants in CO₂ showed that PEO-R_f containing a polar oxyethylene backbone was an effective surfactant for the dispersion polymerization of a polar monomer, such as N-vinyl-2-pyrrolidone, whereas PA-R_f was effective for less polar monomers, such as methyl methacrylate and N-vinyl caprolactam.     

Crosslinked monosulfonated poly(arylene ether) using cyclodimerization of trifluorovinyl ether groups for fuel cell applications

A crosslinker and crosslinkable sulfonated poly(arylene ether)s with trifluorovinyl ether groups were synthesized via reaction of 4‐trifluorovinyloxyphenol for application in fuel cells. Crosslinked poly(arylene ether) membranes were prepared by thermal irradiation, and the cyclodimerization of the trifluorovinyl ether groups in the polymers as well as the crosslinker was confirmed using differential scanning calorimetry and infrared measurements. These crosslinked membranes showed a low swelling ratio, comparable to that of Nafion 112. The proton conductivity of the crosslinked membranes was 0.17 and 0.3 S cm^?1 at 30 and 80 °C, respectively, much higher than that of Nafion 112 under the same conditions. The excellent dimensional stability and high conductivity of the crosslinked membranes can be attributed to this new type of crosslinking system (end‐group crosslinking) as well as the chemical structure of crosslinked (multi‐block) polymers. Copyright © 2011 Society of Chemical Industry     

A current-reuse biomedical amplifier with a NEF < 1

Digital image authenticity is always an imperative question to tackle whenever a digital image is being assessed for its content. Using digital forensic algorithms, the image will be evaluated for various traces left from numerous categories of manipulations including, among others, copy–move operations. Later this is considered an essential block in most digital image forgeries. It results in changing the information incorporated in a scene, hiding information from an image, or emphasizing some parts of the image. In this paper we propose and investigate two main approaches that differ in the feature extraction process in order to detect copy–move traces. In the first method, we use two-dimensional discrete cosine transform. Whereas in the second method, the phase response of Gabor filter is being used. Instead of being applied on the image directly, the two methods are applied over the first, the second or the third principal component of the image after being divided into overlapping blocks. Combining these conditions results in six basic implementations that are investigated under three parameters that must be optimized: block dimension, contrast and similarity thresholds. Results from testing and validation process demonstrate that the highest performance, in terms of false accept rate, is obtained when using Gabor filter associated with the first principal component of the image outperforming a reference method we implemented as well.