铝锂合金力学性能的各向异性

针对当前困扰铝锂合金实际应用的各向异性问题，概述关于铝锂合金中各向异性的表现规律，产生机理及对于降低各向异性所采用的方法等方面的研究现状和进展，对铝锂合金各向异性表现与微观组织结构的关系以及目前克服各向异性所采用方法的局限性进行分析。就此提出，若彻底解决这一问题则必须采用更先进的合金化方法及热加工工艺，研制新一代铝锂合金的观点和研究方向。     

外加剂混凝土动态与静态坍落度损失的流变特性

本文对动、静态下混凝土坍落度损失的规律进行了研究,并从流变学的角度分析了外加剂对动、静态下混凝土坍落度损失的影响坍落度损失存在差别的原因.     

一种简便实用的视频特技切换器

本文介绍了一种用集成电路制作的特技切换器，具有成本低，线路简单，易于制作的特点。可以完成简单，基本的扫换，键控，特技效果和快切等功能。     

The use of doped polyaniline as an electrode in the galvanic anodic protection of ferrous metals in industrial acid solutions

In order to investigate the galvanic anodic protection (GAP) of ferrous metals (such as 410, 304 and 316 stainless steels) in acid solutions by doped polyaniline (PANi), separate doped PANi powder-pressed electrodes with different surface areas (the area ratio of the PANi electrode to stainless steel is between 1:1 and 1:2) have been prepared. These were coupled with ferrous metal in the following solutions: 5 M sulphuric acid, 5 M phosphoric acid and industrial phosphoric acid (containing 5 M phosphoric acid and 0.05% chloride ion) to construct a galvanic cell, in which PANi is cathode while ferrous metal is anode. The results indicate that a PANi electrode with sufficient area can provide corrosion protection to stainless steel in these acidic solutions. A pilot scale coupling experiment was carried out. The results indicate that PANi is a promising material as an electrode for the anodic protection of ferrous metals in acidic solutions in industrial situations.     

解决舒兰市城市水源工程基础设施建设措施的探讨

为适应城市发展需要,必须加强城市水利工作,通过对舒兰市水资源现状分析,对解决城市供水水源工程建设的措施进行探讨。     

吉林省中部地区水资源配置初探

中部地区水资源总量为39.61亿m3。城市用水与农业、生态用水矛盾突出,城市供水能力不足,水污染问题严重,地下水超采严重,水资源开发利用不协调。该区水资源已无进一步开发利用的潜力,需通过调水工程解决缺水问题。水资源配置思路为从地处松花江上游的丰满水库引水,增加供水能力。     

塔河油田特殊钻井条件下的录井技术

该文阐述了定向井、水平井和欠平衡钻井技术对传统录井方法的影响:钻时偏大、失真,岩屑细、代表性差,荧光常达12级、无意义,全烃值一般在5%以上,难以有效划分油气层;指出在特殊钻井条件下掌握设计指导思想,卡准重要层位是录井工作的关键,重点要参考组分分析数据、定量荧光分析数据和综合录井其它信息才能准确识别油气层。     

三峡工程明渠提前截流方案及水力学试验研究

论述了三期明渠提前截流方案的综合比较分析及截流水力学试验研究成果。认为拟定的提前截流诸方案各有利弊 ,其截流难度较初设方案显著增加。对于截流“基本方案”及“比较方案”的成功实施 ,必须辅之以一定的工程技术措施降低截流难度     

A transmit/receive IF chip set for WCDMA mobiles in 0.35 /spl mu/m CMOS

An implementation of the IF section of WCDMA mobile transceivers with a set of two chips fabricated in an inexpensive 0.35-/spl mu/m two-poly three-metal CMOS process is presented. The transmit/receive chip set integrates quadrature modulators and demodulators, wide dynamic range automatic gain control (AGC) amplifiers, with linear-in-decibel gain control, and associated circuitry. This paper describes the problems encountered and the solutions envisaged to meet stringent specifications, with process and temperature variations, thus overcoming the limitations of CMOS devices, while operating at frequencies in the range of 100 MHz-1 GHz. Detailed measurement results corroborating successful application of the new techniques are reported. A receive AGC dynamic range of 73 dB with linearity error of less than /spl plusmn/2 dB and spread of less than 5 dB for a temperature range of -30/spl deg/C to +85/spl deg/C in the gain control characteristic has been measured. The modulator measurement shows a carrier suppression of 35 dB and sideband/third harmonic suppression of over 46 dB. The core die area of each chip is 1.5 mm/sup 2/.     

超高相对分子质量聚乙烯纤维研究进展

介绍了超高分子质量聚乙烯纤维的制备、表面改性及应用的研究进展 ,指出了今后超高分子质量聚乙烯纤维的研究及应用的发展方向