Effect of micro-alloying titanium on the dynamic recrystallization behaviour of steels

The effect of titanium addition on the dynamic recrystallization behaviour of steels has been investigated. Constant strain rate tension tests were conducted in vacuum in the temperature range from 925 to 1225°C. Dynamic recrystallization-time-temperature (RTT) curves were developed from the flow curves at ε? = 1 × 10^?2s^?1. The results of the different steels with and without Ti indicate that the onsets of dynamic recrystallization in all the steels are earlier at higher temperatures than at lower temperatures and the addition of titanium may shift the RTT curve of the C–Mn–Si steel towards the right, i.e. retard dynamic recrystallization. The retarding effect of Ti becomes more intensive at temperatures below about 1075°C where a transition of the RTT relationship occurs. Microstructural examinations show that titanium dissolved in austenite can retard the dynamic recrystallization and the precipitation of TiC produces a more intensive retarding effect.     

钒冶炼焙烧添加剂选择研究

对小型钒冶炼厂焙烧工艺所用添加剂进行改进的可能性进行了探讨，研究了几种常用添加剂的焙烧条件，分析比较了其性能，提出用ＮａＣｌ－Ｎａ２ＣＯ３作焙烧添加剂替代ＮａＣｌ可大幅度减少大气污染，提高冶钒转化率；且不改变工艺流程，无需设备投资，具有较好的经济效益和环境效益。     

A time domain approach for avoiding crosstalk in optical blockingmultistage interconnection networks

Crosstalk in multistage interconnection networks can be avoided by ensuring that a switch is not used by two connections simultaneously, in order to support crosstalk-free communications among N inputs and N outputs, a space domain approach dilates an N×N network into one that is essentially equivalent to a 2N×2N network. Path conflicts, however may still exist in dilated networks. This paper proposes a time domain approach for avoiding crosstalk. Such an approach can be regarded as “dilating” a network in time, instead of space. More specifically, the connections that need to use the same switch are established during different time slots. This way, path conflicts are automatically avoided. The time domain dilation is useful for overcoming the limits on the network size while utilizing the high bandwidth of optical interconnects. We study the set of permutations whose crosstalk-free connections can be established in just two time slots using the time domain approach. While the space domain approach trades hardware complexity for crosstalk-free communications, the time domain approach trades time complexity. We compare the proposed time domain to the space domain approach by analyzing the tradeoffs involved in these two approaches     

固载于SBA-15分子筛中的同双核金属配合物催化剂

合成了3种同双核金属配合物[M2LCl3]Cl(L代表配体三亚乙基四胺,M代表Co,Cu,Cr),采用微波加热法合成了SBA-15分子筛,采用浸渍法将3种同双核金属配合物分别固载在表面官能化的SBA-15分子筛(SBA-15-NH2分子筛)中制得负载型催化剂。傅里叶变换红外光谱、X射线衍射、紫外可见光谱和热分析表征结果表明,同双核金属配合物被固载后,其结构仍保持完整。以环己烷氧化反应为探针反应,考察了[Co2LCl3]Cl/SBA-15-NH2,[Cu2LCl3]Cl/SBA-15-NH2,[Cr2LCl3]Cl/SBA-15-NH2催化剂的活性,环己烷转化率分别为11.0%,49.5%,57.9%;对于[Cr2LCl3]Cl/SBA-15-NH2催化剂,当分别以乙睛、丙酮和冰醋酸为溶剂时,环己烷转化率分别为57.9%,52.1%,34.2%,3次重复实验的环己烷转化率分别为57.9%,47.8%,46.5%,表明该催化剂具有较好的活性和重复使用性。     

Study of Density Behavior During LHCD and IBW Heating in the HT-7 Superconducting Tokamak

A new method using special shape parameters has been introduced to study density behavior with synergy of lower hybrid current drive (LHCD) and ion Bernstein wave (IBW) heating in the HT-7 superconducting tokamak. During the synergy of the LHCD and IBW heating an improved confinement plasma was achieved, and the electron density was increased and peaked.     

CAPP系统中工艺卡片生成过程的研究

以AutoCAD2 0 0 0为开发平台、VC + + 6 0为开发环境、ObjectARX2 0 0 0为开发工具、SQLServer为后台数据库 ,通过编写writeText、fillGykztb、fillGykjtb等自定义函数 ,生成工艺卡片 ,并实现工序内容在工艺卡片中的分页显示等功能。     

The integral representations of solutions for circular plate problems without any hold

In this article, the following results are obtained: (1) a special solution and a general solution (non-series form) for circular plate problems are given; (2) integral representations of solutions for circular plate problems without any hold with built-in edge conditions and simply supported edge conditions are found.     

新型光电混合式电流互感器设计

设计了一种光电混合式电流互感器,它由传感头、光纤传输和光电转换器、信号处理电路和工作电源4部分组成。这种结构具有绝缘性能高、可靠性强、质量小等特点,并对误差情况进行了分析。