非对称型外差激光探针

本文描述用于检测微振动的非对称型外差激光探针系统及实验结果。实验数据表明,系统检测灵敏度为1×10~(-4)nm/(Hz)~1/2将本系统用于检测薄膜电路在交变电热下的微振动以及表面波聚焦换能器的辐射声场分布,得到满意的结果。     

试析加入WTO后我国自动喷水灭火系统设计规范之不足

分析了我国进入 WTO后 ,不容乐观的火灾发展趋势 ,指出了我国现行《自动喷水灭火系统设计规范》存在诸多不足 ,阐明了消防规范和消防管理体制离与国际接轨的路程还很长。列出了 15个问题 ,采用与 NFPA规范和国外认证消防产品技术资料比照的方法 ,来探讨国内规范的不足。     

秦岭金矿9~#脉主要矿物特征及矿物学标志

小秦岭地区金矿床严格受构造控制，各成矿阶段及矿物学特征明显，通过对矿物学特征的研究找出矿物学标志，认为今后找矿要注意各阶段石英的颜色、黄铁矿中金的含量以及矿石中银的含量，这些与金有密切关系.     

采用活性非均匀分布催化剂中变反应器的模拟计算

模拟计算表明:采用活性趋于表层的分布,可以较明显地提高国产中温变换催化剂的内表面利用率,有效地节省催化剂用量,而对“热点”温度没有多大影响。     

离心式永磁直流发电机的设计研究

离心式永磁直流发电机把皮带轮与离心式转子设计为一体,磁场得到了充分利用,降低了成本。本文介绍了电子稳压器通过移相、削波输出电压稳定的直流电,解决了小型农用车的低速照明问题和用电设施需用直流电的问题。     

近期全国建材市场走势展望

结合当前我国建材市场的形势 ,就建材市场“涨价风潮”的起因 ,从经济增长的结果、市场运行的规律等方面进行了论述 ,提出了涨价风潮对近期全国建材市场的影响     

甲醇制烯烃技术进展

阐述了甲醇制低碳烯烃各个工艺的研究进展,从甲醇制乙烯、甲醇制丙烯和甲醇制丁烯三个方面对比了各自技术特点,指出未来需开发出以丙烯、 C₄烯烃为主产品的新技术。     

水中爆炸加载金属套管胀形的研究

本文运用爆炸动力学对水中爆炸加载金属套管胀形进行了力学分析，得出了井上与井下的药量关系。具有一定的实用价值。     

Preparation of nanosized titania powder via the controlled hydrolysis of titanium alkoxide

By controlling the hydrolysis of titanium butoxide, followed with or without an ethanol washing process, the preparation of nanoscale titania powder was studied in detail. The characteristics of different powders produced by the direct precipitation (without an ethanol wash) and ethanol wash processes were studied by X-ray diffraction, transmission electron microscopy, BET, thermogravimetry and differential thermal analysis techniques. By comparison, it was found that both the direct precipitation and ethanol wash methods can obtain slightly agglomerated nanoscale titania powders of less than 15 nm, but the ethanol wash can further reduce the agglomeration. The particle sizes of titania powders can be modified while still retaining the anatase structure.     

The preparation and magnetic properties of Fe-Ag granular solid using a sol-gel method

The Fe-Ag granular metal solid samples with 10% and 30% weight iron have been successfully fabricated using a sol-gel method, which are characterized by X-ray diffraction and transmission electron micrography. The average diameters of iron particles are from about a few nanometres to a few tens of nanometres controlled by the reducing temperature. The evolution of magnetic properties and microstructure during heat treating are described in detail and explained by using the superparamagnetism, single domain and multi domain theories. The magnetic anisotropy of the Fe-Ag granular solid is studied by using the law of approach to saturation. It is found that the magnetic anisotropy constant is in the order of 10⁵ J m^–3 which is higher than the value of the bulk iron and increases with the increase of reducing temperature.