MIS型单晶硅液晶光阀

详细介绍了一种新颖、快速响应的金属－绝缘层－半导体构成的MIS型单晶硅液晶光阀的结构、工作机理、制作工艺和性能参数测试。液晶采用45°扭曲向列型混合场效应工作模式。所得到的光阀的极限分辨率为40lp／mm，口径40mm，最大对比度＞100：1，在930nm（△λ＝40nm）写入光灵敏度为20μW／cm2，响应时间为15ms。报道了该光阀在大屏幕投影显示中的应用。     

有自聚焦功能的付里叶计算全息

在制作付里叶计算全息过程中，加入适当的二次位相因子，使此种全息图在相干光照明下就可预定的位置上只再现一个像，省略了过去丙现此种计算全息图必要的付里叶透镜，并且使两个互为共轭像分离，从而拓宽了此种计算全息的应用领域，实验结果与理论分析相符。     

In_（0．2）Ga_（0．8）As／GaAs应变多量子阱结构的光调制反射和热调制反射谱的研究

对Ｉｎ（０．２）Ｇａ（０．８）Ａｓ／ＧａＡｓ应变多量子阱在７７Ｋ下的光调制反射谱（ＰＲ）和热调制反射谱（ＴＲ）进行了实验研究．对ＰＲ结果的线形拟合指认了应变多量子阱中子能级的跃迁，并与理论计算结果作了比较．实验对比确认ＰＲ中１１Ｈ、１３Ｈ等跃迁结构为非耦合态、具有电场调制机构的一阶微商性质．而１１Ｌ、３１Ｈ、２２Ｈ等跃迁结构为阶间耦合态，对这些隧穿耦合的低场调制产生三阶微商特性．     

动态全息图快速引入背景条纹技术

音叉振动镜快速引入背景条纹的动态全息图两次曝光法，适用于一次泵浦的双脉冲全息干涉计量术．其背景条纹的密度和方向具有可调性和重复性．     

Randomized trial of breast self-examination in Shanghai: methodology and preliminary results

BACKGROUND: The efficacy of breast self-examination in helping to reduce mortality from breast cancer has not been rigorously demonstrated. PURPOSE: To assess efficacy, a large, randomized trial was initiated in Shanghai, China. METHODS: From October 1989 to October 1991, 267040 current and retired female employees associated with 520 factories in the Shanghai Textile Industry Bureau were randomly assigned on the basis of factory to either a self-examination instruction group (133375 women) or a control group (133665 women). The women were born within the period from 1925 through 1958. Women in the instruction group were given intensive training in breast self-examination, including the use of silicone breast models and personalized instruction, plus two subsequent reinforcement sessions and multiple reminders to practice the technique. Women in the control group were asked to attend training sessions on the prevention of low back pain. All women have been followed for the development of breast diseases and for death from breast cancer. RESULTS: A high level of participation during the first 4-5 years of the trial was documented among women in the instruction group. Randomly sampled women in this group demonstrated greater proficiency in detecting lumps in breast models than did randomly sampled women in the control group. Approximately equal numbers of breast cancers were detected in the two groups (331 in the instruction group and 322 in the control group) through 1994, which is the last year for which case-finding efforts have been completed. The breast cancers detected in the instruction group were not diagnosed at an appreciably earlier stage or smaller size than those in the control group. More benign breast lesions were detected in the instruction group than in the control group (1457 versus 623, respectively), suggesting a higher index of suspicion for women who received training. Cumulative breast cancer mortality rates through 5 years from entry into the study were nearly equivalent for the two groups. CONCLUSIONS: Breast self-examination has not led to a reduction in mortality from breast cancer in this study cohort in the first several years since the trial began. A shift toward the diagnosis of disease at a less advanced stage in women given instruction has also not been demonstrated. Longer follow-up of participants in this trial is required before final assessment can be made of the efficacy of breast self-examination. IMPLICATIONS: At this time, there is insufficient evidence to recommend for or against the teaching of breast self-examination.     

病险水工建筑物可靠性评估方法初探

 水工建筑物可靠性评估是水利工程管理中急需解决的问题，将水工建筑物分解为由分部工程组成的层次结构，引入子系统概率重要性系数，用层次分析法导出水工建筑物系统可靠度指标的实用计算方法。     

铝液夹杂物检测DMIRT－Ⅲ法的试验研究

提出了一种新的铝液夹杂物快速检测方法。导出了该法的检测原理方程。分析并试验研究了影响检测重复性和分辨率的因素。试验选择了较好的检测参数，并获得了较好的检测结果。     

Simulation study of peak junction temperature and power limitationof AlGaAs/GaAs HBTs under pulsed and CW operation

The authors have used a 3-D transmission-line matrix (TLM) modeling method to study the junction temperature distribution and power limitation of device geometries with multiple embedded heat sources. Peak values of the junction temperature against the dissipated power density under both pulsed and CW operation are presented for a typical power AlGaAs/GaAs HBT structure. These data should facilitate the rapid determination of junction temperature for a given output power, which is of paramount importance in power device design