Effects of Acetic Acid on the Crystallization Temperature of Sol–Gel-Derived MgO Nano-Powders and Thin Films

The influences of acetic acid addition to Mg-methoxide on the stability of the precursor and the crystallization behavior of sol–gel-derived MgO nano-powders and thin films were investigated using X-ray powder diffraction, transmission electron microscopy, Fourier-transformed infrared spectroscopy, and thermogravimetry. The addition of acetic acid enhanced the stability of the alkoxide against precipitation. Moreover, during postheat treatment of the gel powders treated with acetic acid, a significantly lowered crystallization temperature (250°C) was observed as compared to the untreated counterpart (350°C). The low-temperature crystallization of MgO, induced by the modification of Mg-methoxide with acetic acid, was related to the decomposition of organics at a lower temperature. These results could be explained in terms of the decrease of the O–R bond strength depending on the increase in the alkyl group size. MgO thin films having a high degree of crystallinity were successfully obtained from the Mg-methoxide treated with acetic acid at 300°C. The low-temperature crystallization of sol–gel-derived MgO thin films showed the feasibility for their application as a protective layer in alternative current plasma display panel cells.     

Wetting properties of polystyrene ionomers treated with plasma source ion implantation

The wetting properties of polystyrene‐based ionomers treated with plasma source ion implantation (PSII) were investigated by the measurement of water contact angles. When sulfonated ionomers were aged for a few days, the hydrophobic recovery for the ionomers became much slower than that for the nonionic polymers. However, when the samples were aged over 20 days, the water contact angle of the ionomers converged with that of the nonionic polymer. Thus, it was concluded that the ionic interaction between the ionic groups and the presence of ionic groups together resulted in the slow hydrophobic recovery and that the aging effect was significant for the ionomers. For the methacrylate ionomer of low ion content, on the other hand, it was found that the PSII treatment produced only a small change in hydrophobic recovery behavior. Thus, it was suggested that the low ionic content coupled with the small size of the ionic unit might cause changes only of a very insignificant degree in hydrophobic recovery behavior. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2500–2504, 2002     

Electrical properties of (Bi3.5La0.5)Ti3O12 thin-films prepared by liquid source misted chemical deposition

The ((Bi_3.5La_0.5)Ti₃O₁₂(BLT) thin-films used in this study were fabricated on a Pt(111)/SiO₂/Si(100) substrate by a Liquid Source Misted Chemical Deposition (LSMCD) technique. X-ray diffraction patterns showed that the BLT films were crystallized and no other phases were observed when annealed above 650 ‡C. Grain size and remnant polarizations increased with increase in the annealing temperature, while leakage current densities decreased. The remnant polarizations (Pr) increased from 2.0 to 4.8 and 19.0 μC/cm2 with increase in the annealing temperature from 650 to 700 and 750 ‡C, respectively. The BLT films annealed at 700 ‡C in O₂ showed a good fatigue resistance of reduced polarization by 10% after 10⁹ switching cycles when 9 V of bipolar voltage was applied at a frequency of 40 kHz.     

An analysis of muscles from ultrasound image using morphological information of fascia and thoracic vertebra

In this paper, we propose a new fully computerized image analysis method for measuring the thickness of muscles from ultrasound image obtained by muscle endurance test using morphological information of fascia and thoracic vertebra. Firstly, we divide the image into lumbar region and thoracolumbar region by the difference of density in image for measuring the thickness of muscles. In lumbar region, we notice that the intensity of fascia is relatively higher than other parts. Thus, we measure the thickness of muscles surrounding the fascia area. In the process, we apply median filter to candidate fascia areas for extracting candidate muscle layers between fascias. Then, the thickness of muscles we measure is that of the third layer. In thoracolumbar region, we apply region expansion method for classifying the region into subcutaneous fat part and part including thoracic vertebra. Then, we apply counting method and evolutionary computation search model to find the measuring location that is in between subcutaneous fat area and thoracic vertebra. In experiment, the proposed method is effective in measuring the thickness of muscles and avoids failures of previous studies. The performance of this approach is sufficiently comparable to that of medical experts.     

Case-based context ontology construction using fuzzy set theory for personalized service in a smart home environment

To provide context-based personalized services utilizing smart appliances in a smart home environment, we propose a framework for PersonAlized Service disCovery Using FuZZY-based CBR and Context Ontology (PASCUZZY). Basically, the PASCUZZY framework is implemented on case-based context ontology. To generate and manage the case instances on the case-based context ontology, we adopt the fuzzy set theory to transpose numerical-type context data sensed from the surrounding environment. The context is transposed to linguistic-type context instances on the context ontology. In addition, to formalize and manage the context and services as multi-attributed data, the context ontology was developed reflecting the structure of cases borrowed from case-based reasoning. Furthermore, we propose adaptation methods to adjust the generic fuzzy membership functions depending on the inhabitants’ context. It is performed by modifying the values of the membership number and/or modifying the numbers of the linguistic terms that are based on the inhabitants’ context to affect the membership numbers. The adapted membership functions return the personalized degree of memberships depending on the specialized context of a specific fuzzy variable. Inevitably, the number of cases on the case-based context ontology will be increased from time to time. We apply Ward’s method not only to reduce the search effort via a hierarchical clustering on the case-based context ontology but also to find the most similar service as a solution to the new context. To verify the superiority of the PASCUZZY framework, we perform two kinds of evaluations. First, we evaluate the effectiveness of the adaptation of the fuzzy membership functions. Second, we verify the effectiveness of the application of a clustering method to the case instances of the case-based context ontology to identify the most similar service. Results of the experiment verified the effectiveness and superiority of the PASCUZZY framework.     

Effectiveness test of alginate‐derived polymeric surfactants

A series of alginate‐derived polymeric surfactants (APSs) with a linear alkyl group (C8, C12, C16) was synthesized by oxidation followed by reductive amination of 2,3‐dialdehydic alginate. The products were characterized by measuring IR spectra, NMR spectra, surface tension and critical micelle concentration (cmc). They were also tested for the solubilization of azobenzene and adsorption of heavy metal. In the case of 40% CHO‐C8 APSs, the lowest interfacial tension value (31.5 m Nm^?1) was obtained at the cmc value of 1.35 g dm^?3. The dissolving capacity of 40% CHO‐C8 APS towards azobenzene was 27 times greater than that of alginate. The overall cobalt (Co²⁺) removal efficiency by adsorption using APSs was high compared with that of sodium alginate at pH 3, 5 and 7. Equilibrium aspects of cobalt adsorption onto 10% CHO‐APSs were studied, and the results show that APSs had high equilibrium capacities for cobalt uptake, 115.5 mgg^?1. © 2002 Society of Chemical Industry     

The removal of hydrogen sulfide with manganic sorbent in a high-temperature fluidized-bed reactor

The removal of hydrogen sulfide (H₂S) from simulated gas was carried out in a batch type fluidized-bed reactor using natural manganese ore (NMO), which consists of several metal oxides (MnO_x: 51.85%, FeO_y: 3.86%, CaO: 0.11%). The H₂S breakthrough curves were obtained by changing temperature, gas velocity, initial H₂S concentration, and aspect ratio. Moreover, the effects of the particle size and the particle-mixing fraction on H₂S removal were investigated in a binary system of different particle size. From this study, H₂S removal efficiency increased with increasing temperature but decreased with increasing excess gas velocity. The breakthrough time for H₂S decreased as the gas velocity increased, which leads to reducing gas-solid contacting due to gas bypassing in a fluidized bed reactor. Improvement of H₂S removal efficiency in continuous process can be expected from the results of the binary particle system with different size in a batch experiment. The NMO could be considered as a potential sorbent in H₂S removal.     

Preparation and characterization of modified starch‐based plastic film reinforced with short pulp fiber. II. Mechanical properties

Native corn starch‐ and hydroxypropylated starch (HPS‐) based plastic films were prepared using the short pulp fiber as the reinforcement and the glycerol as the plasticizer. The results of tensile test showed that the strain and stress at break and elastic modulus increased with pulp content. With glycerol content, the strain at break increased considerably, but the breaking stress and elastic modulus decreased. And the stress–strain curves showed that the brittleness problem of films was overcome by the pulp, glycerol, and water content. The hydroxypropyl starch films showed results similar to those of the native starch films. The results of the three‐point bending test showed that maximum deflection, flexural strength, and specific work increased with pulp content, but the flexural modulus was the highest at a pulp content of 20%. And with the glycerol content, the maximum deflection and specific work of rupture increased, but the bending elastic modulus decreased. The hydroxypropyl starch films showed results similar to those of native starch films as far as the maximum deflection and flexural strength were concerned, but the bending elastic modulus and specific work of the hydroxypropyl starch films were considerably lower than those of starch films. So it was concluded that the flexibility of films was improved by the hydroxypropylation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2108–2117, 2003     

Crystal shape monitoring and supersaturation measurement in cooling crystallization with quartz crystal oscillator

A crystallization monitoring system using a quartz crystal oscillator was utilized to predict different shapes of crystal formation by measuring crystal growth rate and to measure supersaturation. Applying different rates of cooling, crystal formation of different shapes was induced, and the frequency variation of the oscillator and the crystal shape observed with an SEM were compared to determine how the frequency variation can be interpreted for the prediction of produced crystal shape. The experimental results obtained from the crystallization of potassium nitrate and cupric sulfate solutions showed that the proposed frequency measurement technique could be applied in the prediction of crystal shape of cooling crystallization processes. In addition, supersaturation was determined from the measurements of solution and coolant temperatures.     

Properties of chitosan‐based biopolymer films with various degrees of deacetylation and molecular weights

An increase in the depolymerization of chitosan was found with an increased concentration of sodium perborate. Acetic anhydride was added to reacetylated chitosan in a molar ratio per gulcosamine unit, and the amide I band of IR spectra changed with the addition of acetic anhydride. Sixteen chitosans with various molecular weights (MWs) and degrees of deacetylation (DODs) were prepared. X‐ray diffraction patterns indicated their amorphous and partially crystalline states. Increases in the chitosan MW and DOD increased the tensile strength (TS). TS of the chitosan films ranged from 22 to 61 MPa. However, the elongation (E) of chitosan films did not show any difference with MW. TS of chitosan films decreased with the reacetylation process. However, E of chitosan films was not dependent on DOD. The water vapor permeabilities (WVPs) of the chitosan films without a plasticizer were between 0.155 and 0.214 ng m/m² s Pa. As the chitosan MW increased, the chitosan film WVP increased, but the values were not significantly different. Moreover, the WVP values were not different from low DOD to high DOD. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3476–3484, 2003