The growth of small diameter silicon nanowires to nanotrees

In this work we have studied a way to control the growth of small diameter silicon nanowires by?the vapour-liquid-solid (VLS) mode. We have developed a method to deposit colloids with good density control, which is a key point for control of the nanowire (NW) diameter. We also show the high dependence of the allowed growth diameter on the growth conditions, opening the door to the realization of as-grown 2?nm silicon NWs. Finally we have developed a smart way to realize nanotrees in the same run, by tuning the growth conditions and using gold on the sidewall of nanowires, without the need for two catalyst deposition steps.     

Direct quantification of gold along a single Si nanowire

The presence of gold on the sidewall of a tapered, single silicon nanowire is directly quantified from core-level nanospectra using energy-filtered photoelectron emission microscopy. The uniform island-type partial coverage of gold determined as 0.42+/-0.06 (approximately 1.8 ML) is in quantitative agreement with the diameter reduction of the gold catalyst observed by scanning electron microscopy and is confirmed by a splitting of the photothresholds collected from the sidewall, from which characteristic local work functions are extracted using a model of the full secondary electron distributions.     

Highly organised and dense vertical silicon nanowire arrays grown in porous alumina template on <100> silicon wafers

In this work, nanoimprint lithography combined with standard anodization etching is used to make perfectly organised triangular arrays of vertical cylindrical alumina nanopores onto standard <100>−oriented silicon wafers. Both the pore diameter and the period of alumina porous array are well controlled and can be tuned: the periods vary from 80 to 460 nm, and the diameters vary from 15 nm to any required diameter. These porous thin layers are then successfully used as templates for the guided epitaxial growth of organised mono-crystalline silicon nanowire arrays in a chemical vapour deposition chamber. We report the densities of silicon nanowires up to 9 × 10⁹ cm⁻² organised in highly regular arrays with excellent diameter distribution. All process steps are demonstrated on surfaces up to 2 × 2 cm². Specific emphasis was made to select techniques compatible with microelectronic fabrication standards, adaptable to large surface samples and with a reasonable cost. Achievements made in the quality of the porous alumina array, therefore on the silicon nanowire array, widen the number of potential applications for this technology, such as optical detectors or biological sensors.     

Operational modal testing and FE model tuning of a cable-stayed bridge

The paper presents the results obtained from the application of different output-only modal identification techniques to ambient response data collected in two dynamic tests of a cable-stayed bridge and the subsequent finite element model correlation analysis. The first test, performed by using a traditional data acquisition system with servo-accelerometers, was aimed at investigating the vertical dynamic characteristics of the bridge. In the second test, an innovative radar vibrometer was used for non-contact measurement of deflection time series of the forestays and the identification of local natural frequencies of the stay cables.In the theoretical study, vibration modes were determined using a 3D Finite Element model of the bridge and the information obtained from the field tests, combined with a classic system identification technique, provided a linear elastic model, accurately fitting the modal parameters of the bridge in its present condition.     

Silver self aggregation in a nanodevice for enhanced Raman spectroscopy: experiments vs. simplified modeling via molecular dynamics

We present a study, via experiments and exploratory molecular dynamics simulations, of self aggregation in cylindrical nanostructures obtained experimentally by combining high resolution electron beam lithography with electroless silver deposition. This process is key to the fabrication of a nanolens device, where a strong surface enhancement can be exploited for Raman spectroscopy. In order to investigate the process, we introduce a simple theoretical model and compare the results of simulations with the fabricated silver nanostructures during the growth phase. Our simulations qualitatively agree with the experiments and allow a general characterization of the process at length scales smaller than those easily accessible by microscopy. We identify a geometrical parameter, the aspect ratio of the cylinder, that relates two different types of growth with different characteristics and, possibly, different Raman enhancements.     

嵌入式多媒体应用的多处理器核软件设计框架

基于单核结构的嵌入式处理器越来越不能满足日益增长的嵌入式多媒体处理应用方面的要求,多核嵌入式结构已成为解决这一问题的有效途径,同时也为如何开发充分利用多核结构的应用软件带来挑战.目前,需要将编译技术和开发工具更多的结合,才能使多核结构的应用获得成功.而大多数并行软件都是通过手工转换方式将顺序程序转换为并行程序来实现的.由于缺乏具有多核意识的开发工具,使得软件难以进行性能评估.因此,如果没有预先有效可靠的工程规划,将不得不面对应用软件的效率低下,以及延迟产品上市时间等问题.     

KIND‐DAMA: A modular middleware for Kinect‐like device data management

In the last decades, we have witnessed a growing interest toward touchless gestural user interfaces. Among other reasons, this is due to the large availability of different low‐cost gesture acquisition hardware (the so‐called “Kinect‐like devices”). As a consequence, there is a growing need for solutions that allow to easily integrate such devices within actual systems. In this paper, we present KIND‐DAMA, an open and modular middleware that helps in the development of interactive applications based on gestural input. We first review the existing middlewares for gestural data management. Then, we describe the proposed architecture and compare its features against the existing similar solutions we found in the literature. Finally, we present a set of studies and use cases that show the effectiveness of our proposal in some possible real‐world scenarios.     

Hyaluronan-coated poly(propylene imine) dendrimers as biomimetic nanocarriers of doxorubicin

A coating technology based on low molecular weight hyaluronic acid (HA) and ferulic acid (FA) was applied to the coating of low generation poly(propylene imine) dendrimers through a biocompatible hexa(ethylene glycol) spacer. The ensuing HA-FA-HEG-PPID dendrimeric materials showed interesting loading capability (between 7.65% and 9.08%) regarding anticancer agent doxorubicin, and their interactions with the drug appeared to hamper the drug release in the physiological environment. Thus, the stable nanostructured loaded delivery systems were able to internalize into cells expressing the HA receptor CD44 and to demonstrate high cytotoxicity comparable to that shown by equivalent amounts of free doxorubicin. Thus, HA-FA-HEG-PPID dendrimeric materials were proposed as biocompatible drug carriers capable of transporting anticancer doxorubicin to tumor cells.     

Effect of saffron addition on the microbiological,physicochemical, antioxidant and sensory characteristics of yoghurt

The impact of added saffron on the characteristics of yoghurt was evaluated during storage. The fat content was lower in the saffron yoghurt. All colour variables were significantly affected by saffron and storage. From the 15th day of storage, bacterial numbers in the saffron yoghurt were higher than those of the control yoghurt. Sensory analysis data suggested that colour, odour and texture impacted consistently on the overall acceptability of the saffron yoghurt. Saffron addition significantly increased polyphenol content and antioxidant activity, providing evidence that the enrichment of natural yoghurt with saffron yields an innovative fermented product useful for supplementing antioxidant dietary intake.