Control of gold surface diffusion on si nanowires

Silicon nanowires (NW) were grown by the vapor-liquid-solid mechanism using gold as the catalyst and silane as the precursor. Gold from the catalyst particle can diffuse over the wire sidewalls, resulting in gold clusters decorating the wire sidewalls. The presence or absence of gold clusters was observed either by high angle annular darkfield scanning transmission electron microscopy images or by scanning electron microscopy. We find that the gold surface diffusion can be controlled by two growth parameters, the silane partial pressure and the growth temperature, and that the wire diameter also affects gold diffusion. Gold clusters are not present on the NW side walls for high silane partial pressure, low temperature, and small NW diameters. The absence or presence of gold on the NW sidewall has an effect on the sidewall morphology. Different models are qualitatively discussed. The main physical effect governing gold diffusion seems to be the adsorption of silane on the NW sidewalls.     

Inhibition of a U(VI)- and sulfate-reducing consortia by U(VI)

The stimulation of microbial U(VI) reduction is currently being investigated as a means to reduce uranium's mobility in groundwater, but little is known about the concentration at which U(VI) might inhibit microbial activity, or the effect of U(VI) on bacterial community structure. We investigated these questions with an ethanol-fed U(VI)- and sulfate-reducing enrichment developed from sediment from the site of an ongoing field biostimulation experiment at Area 3 of the Oak Ridge Field Research Center (FRC). Sets of triplicate enrichments were spiked with increasing concentrations of U(VI) (from 49 microm to 9.2 mM). As the U(VI) concentration increased to 224 microM, the culture's production of acetate from ethanol slowed, and at or above 1.6 mM U(VI) little acetate was produced over the time frame of the experiment. An uncoupling inhibition model was applied to the data, and the inhibition coefficient for U(VI), Ku, was found to be approximately 100 microM U(VI), or 24 mg/L, indicating the inhibitory effect is relevant at highly contaminated sites. Microbial community structure at the conclusion of the experiment was analyzed with terminal restriction fragment length polymorphism (T-RFLP) analysis. T-RFs associated with Desulfovibrio-like organisms decreased in relative abundance with increasing U(VI) concentration, whereas Clostridia-like T-RFs increased.     

Osteopathy and resistance to vitamin D toxicity in mice null for vitamin D binding protein

A line of mice deficient in vitamin D binding protein (DBP) was generated by targeted mutagenesis to establish a model for analysis of DBP's biological functions in vitamin D metabolism and action. On vitamin D-replete diets, DBP-/- mice had low levels of total serum vitamin D metabolites but were otherwise normal. When maintained on vitamin D-deficient diets for a brief period, the DBP-/-, but not DBP+/+, mice developed secondary hyperparathyroidism and the accompanying bone changes associated with vitamin D deficiency. DBP markedly prolonged the serum half-life of 25(OH)D and less dramatically prolonged the half-life of vitamin D by slowing its hepatic uptake and increasing the efficiency of its conversion to 25(OH)D in the liver. After an overload of vitamin D, DBP-/- mice were unexpectedly less susceptible to hypercalcemia and its toxic effects. Peak steady-state mRNA levels of the vitamin D-dependent calbindin-D9K gene were induced by 1,25(OH)2D more rapidly in the DBP-/- mice. Thus, the role of DBP is to maintain stable serum stores of vitamin D metabolites and modulate the rates of its bioavailability, activation, and end-organ responsiveness. These properties may have evolved to stabilize and maintain serum levels of vitamin D in environments with variable vitamin D availability.     

Multifunctional devices and logic gates with undoped silicon nanowires

We report on the electronic transport properties of multiple-gate devices fabricated from undoped silicon nanowires. Understanding and control of the relevant transport mechanisms was achieved by means of local electrostatic gating and temperature-dependent measurements. The roles of the source/drain contacts and of the silicon channel could be independently evaluated and tuned. Wrap gates surrounding the silicide-silicon contact interfaces were proved to be effective in inducing a full suppression of the contact Schottky barriers, thereby enabling carrier injection down to liquid helium temperature. By independently tuning the effective Schottky barrier heights, a variety of reconfigurable device functionalities could be obtained. In particular, the same nanowire device could be configured to work as a Schottky barrier transistor, a Schottky diode, or a p-n diode with tunable polarities. This versatility was eventually exploited to realize a NAND logic gate with gain well above one.     

Influence of pre-treatment on the surface composition of Al-Zn alloys

The influences of pre-treatments on the composition of Al-Zn alloys, containing 0.6-1.9 at.%Zn, are investigated using scanning and transmission electron microscopies, glow discharge optical emission spectroscopy and ion beam analysis. Alkaline etching, anodic alkaline etching and electropolishing result in zinc enrichments, just beneath the oxide/hydroxide films on the alloy surfaces. The enriched alloy, about 4-5 nm thick, contains zinc in solid-solution with aluminium, up to about 18 at.%. The highest and lowest enrichments are produced by alkaline etching and electropolishing respectively. For a given pre-treatment, the enrichment increases with increase in zinc content of the bulk alloy.     

Crosslinked gelatin nanofibres: Preparation,characterisation and in vitro studies using glial-like cells

Gelatin (GL) nanofibrous matrices mimicking the complex biological structure of the natural extracellular matrix (ECM) were prepared from aqueous solutions by electrospinning technique. GL nanofibres with a diameter size of around 300 nm were obtained optimising the process and solution parameters. To increase the GL stability in aqueous environment γ-glycidoxypropyltrimethoxysilane (GPTMS) was used as GL crosslinker. GPTMS crosslinking did not modify the nanofibrous matrix morphology: fibre diameter and membrane pores size were 327 ± 45 nm and 1.64 ± 0.37 μm, respectively. The produced GPTMS crosslinked GL nanofibres (GL/GPTMS_NF) were found to support the in vitro adhesion, proliferation and survival of neonatal olfactory bulb ensheating cells (NOBECs).     

Ultrahydrophobic PMMA micro- and nano-textured surfaces fabricated by optical lithography and plasma etching for X-ray diffraction studies

Polymeric (PMMA) ultrahydrophobic surfaces with contact angles up to about 170° have been fabricated and used in the context of synchrotron radiation experiments on biological droplets. The different microfabrication processes included either an optical lithography phase followed by a plasma texturing one or a single step deep reactive ion etch attack.The drying of several biological solution droplets has been monitored. Room temperature evaporation experiments (lysozyme, lactalbumin, cytochrome C, doxorubicin and synthesized peptides) finally result in the formation of easily detachable hollow residuals because of the low interaction between the ultrahydrophobic substrate and the aqueous droplet while pilot experiments (bovine insulin) in a sitting-drop environment bring to the formation of well defined crystals. Recent results about in situ X-ray diffraction experiments by SAXS & WAXS (Small and Wide Angle X-ray Scattering) μ-beam techniques confirm that the presence of such surfaces influences the formation of crystal or fibril structures. These substrates represent indeed a suitable support to study biological and inorganic droplets in a near contact-free environment exploiting the homogeneous evaporation rate induced by the ultrahydrophobicity of the system.     

Spatio-temporal analysis of trap catches of Tribolium confusum du Val in a semolina-mill, with a comparison of female and male distributions

By using food-bait traps, we evaluated the presence and the spatio-temporal distribution of insect pests in an industrial semolina-mill, with particular attention to Tribolium confusum du Val in which the spatio-temporal dynamics of females and males were also studied separately. A total of 1401 insect specimens was captured in the traps, belonging to 14 taxa, mainly Coleoptera. The most abundant species were T. confusum (with 1002 adults), followed by Typhaea stercorea (L.) (with 158 adults) and T. castaneum (Herbst) (with 110 adults). Of particular interest was the presence in the food-bait traps of T. confusum and T. castaneum adults in a mixed population with equal numbers of males and females. Furthermore, analysis of the spatio-temporal dynamics suggested that the distribution of the two sexes in T. confusum was almost the same during the entire sampling period. The findings of our study can usefully be applied to the management of Tribolium infestations, but further and more detailed studies are needed to better understand the ecology and behaviour of the species in association with searching for food and production of aggregation pheromones.     

Growth and characterization of gold catalyzed SiGe nanowires and alternative metal-catalyzed Si nanowires

The growth of semiconductor (SC) nanowires (NW) by CVD using Au-catalyzed VLS process has been widely studied over the past few years. Among others SC, it is possible to grow pure Si or SiGe NW thanks to these techniques. Nevertheless, Au could deteriorate the electric properties of SC and the use of other metal catalysts will be mandatory if NW are to be designed for innovating electronic. First, this article's focus will be on SiGe NW's growth using Au catalyst. The authors managed to grow SiGe NW between 350 and 400°C. Ge concentration (x) in Si1-xGex NW has been successfully varied by modifying the gas flow ratio: R = GeH4/(SiH4 + GeH4). Characterization (by Raman spectroscopy and XRD) revealed concentrations varying from 0.2 to 0.46 on NW grown at 375°C, with R varying from 0.05 to 0.15. Second, the results of Si NW growths by CVD using alternatives catalysts such as platinum-, palladium- and nickel-silicides are presented. This study, carried out on a LPCVD furnace, aimed at defining Si NW growth conditions when using such catalysts. Since the growth temperatures investigated are lower than the eutectic temperatures of these Si-metal alloys, VSS growth is expected and observed. Different temperatures and HCl flow rates have been tested with the aim of minimizing 2D growth which induces an important tapering of the NW. Finally, mechanical characterization of single NW has been carried out using an AFM method developed at the LTM. It consists in measuring the deflection of an AFM tip while performing approach-retract curves at various positions along the length of a cantilevered NW. This approach allows the measurement of as-grown single NW's Young modulus and spring constant, and alleviates uncertainties inherent in single point measurement.