Investigation of the sedimentation of FeNi fine grains entrained in ERF slag

Nickel losses in the slag generated at Larco electric reduction furnaces (ERF) during smelting of Greek laterites account for about 20% of the total nickel of the feed. The recovery of the nickel contained in the slag as well as in its magnetic concentrate was studied under different methods. The experimental results have shown that a nickel recovery in the range of 75-90% is possible by allowing the slag to settle. Washing by low carbon steel can be performed during the final stages of the settling process as it improves the finally attained nickel recovery up to 94.4%. The simultaneous carbon reduction and settling process do not favour the Ni- recovery as the produced carbon monoxide and dioxide cause boiling of the bath which promotes the flotation of the metallic grains. In all cases a reoxidation of nickel was observed after 20min approximately. Settling of the ferronickel grains was described by a mathematical model. The model's results are in good agreement to the experimental ones for the initial 20min of the process. A modified model was elaborated combining the settling of the metallic grains with the nickel reoxidation reaction. This model describes with adequate accuracy the whole Ni- recovery process. The developed model can be proven helpful in the design of a slag cleaning step for metal recovery utilizing a slag settling furnace operating on line to the ERF.     

Acknowledgement of Reviewers 2020

Water Resources Management -     

Algorithms for processing the group K nearest-neighbor query on distributed frameworks

Distributed and Parallel Databases - Given two datasets of points (called Query and Training), the Group (K) Nearest-Neighbor (GKNN) query retrieves (K) points of the Training with the smallest sum...     

THE IRREVERSIBLE ADSORPTION OF PLUTONIUM HEXAFLUORIDE†

The room temperature adsorption of PuF_6(g) on a solid substrate was compared to the adsorption of UF6(g) on the same surface. Significantly more PuF_6(g) was adsorbed at pressures in the range of 1.2 to 0.2torr, accompanied by the evolution of molecular fluorine. The adsorbed UF₆ was easily desorbed by reducing the pressure. Most of the adsorbed PuF₆ remained on the surface when subjected to the same treatment.     

Aplysia sea hare assimilation of secondary metabolites from brown seaweed,Stypopodium zonale

JuvenileAplysia dactylomela were found feeding in abundance on the tropical brown algaStypopodium zonale, a seaweed previously shown to contain numerous unique terpene-quinone natural products. Lipid extracts of these herbivorous mollusks were shown by TLC and HPLC-NMR analyses to contain appreciable quantities of twoS. zonale metabolites as well as one new but closely related compound. Spectroscopic analyses of the new compound in concert with functional group modifications identified this new compound as 3-keto epitaondiol. A careful analysis of the seaweed extract failed to locate this ketone, and thus, it most likely represents anAplysia-biotransformed compound. This is the first clear reported observation of metabolite transfer between an alga of the phylum Phaeophyta and a sea hare.     

Inhibition by 5-(tetradecyloxy)-2-furoic acid of fatty acid and cholesterol synthesis in isolated rat hepatocytes

Fatty acid and cholesterol synthesis in isolated rat hepatocytes were strongly inhibited by 5-(tetradecyloxy)-2-furoic acid. With either³H₂O or [2-¹⁴C]acetate as the labeled precursor, the concentrations of inhibitor causing 50% decrease in fatty acid and cholesterol synthesis were, respectively, <0.005 mM and 0.020 mM. At 0.1 mM inhibitor, citrate concentration in cells from fed rats was increased by 75%; lactate and pyruvate concentrations were decreased by 30%; ethanol oxidation was decreased by 20%; with cells from starved rats, the mitochondrial [NAD⁺]/[NADH] was decreased. Other parameters were unaffected. Both its potency and its specificity indicate that 5-(tetradecyloxy)-2-furoic acid will be useful in studies on the regulation of lipid biosynthesis.     

Terpolymers. II. Mechanical properties and transition temperatures of terpolymers of vinyl stearate,vinyl acetate,and vinyl chloride

Vinyl stearate was studied as a major internal plasticizer in terpolymers containing vinyl acetate and vinyl chloride. The terpolymers were prepared by systematically replacing vinyl acetate by close increments of vinyl stearate starting with combinations of vinyl acetate and vinyl chloride, in increments, over all compositions. For comparison of properties, a complete range of copolymers of vinyl stearate and vinyl chloride, as well as mixtures of poly(vinyl chloride) and di-2-ethylhexyl phthalate (DOP) were also made. The external plasticizer was more efficient in reducing the glass temperature than was vinyl stearate. The decline in T_g with weight fraction of plasticizer was linear for the copolymers and terpolymers but concave downward with the liquid diluent. The linear decline was shown to involve mere additivity of the free volume contributed by each side-chain methylene (or methyl) group in both vinyl esters to reducing T_g. The mechanism of the diluent system was more complex. However, the magnitude of the reduction of tensile modulus at a given weight fraction of DOP could be equaled or exceeded by the same amount of vinyl stearate, by increasing the vinyl acetate content of the base copolymer to 40 mole-% or more. Unfortunately, the ultimate strengths and elongations of internally plasticized systems were reduced more than those of the mixtures at comparable compositions. Vinyl stearate was found to markedly retard photolytic degradation compared to both vinyl acetate and the external plasticizer in unstabilized samples having nearly the same thermal treatment. The effect was greater than could be ascribed to dilution by the long alkyl group. The production of a stearoyl radical more stable than the radicals initiating dehydrochlorination is suggested as a possible mechanism.     

Mechanical properties and transition temperatures of copolymers of N-n-alkylacrylamides and vinylidene chloride

Mechanical and solution properties, melting transitions, torsional stiffness temperatures, T_f, and selected modulus-temperature curves are presented for copolymers of the N-n-alkylacrylamides with vinylidene chloride. Copolymers were prepared at 60°C across the range of compositions, using as comonomers N-n-butyl-, octyl-, dodecyl- and oleyl-acrylamide, which have amorphous side-chains, and N-n-octadecyl acrylamide and n-octadecyl acrylate whose side-chains are crystalline. The mechanical properties reflected the effect of the decline in backbone crystallinity and the simultaneous development of strong intermolecular interactions in the amorphous stage. Copolymers were stiff or showed brittle failure across the compositional range except when intermolecular forces were reduced (with n-octadrcyl acrylate) and side-chain crystallization eliminated (with N-oleylacrylamide). These systems and the n-dodecylacrylamide copolymers had yield strengths less than brittle strengths and substantial elongations. Backbone crystallinity was eliminated at about 15 mole % amide and side-chain crystallinity vanished at less than 10 mole % of the amide in the N-n-octadecylacrylamide series. No depression in side-chain melting point occurred with dilution by segments of vinylidene chloride. Over-all decline in the flex-temperature was the normal monotonic function of composition except that values increased in magnitude at high vinylidene chloride contents, the effect presumably being caused by the presence of crystallinity. An empirical equation was developed which permitted the calculation of T_f for any N-n-alkylacrylamide composition with any number of carbon atoms in the side-chain, above 3.     

Effect of theθ-α-Al2O3 transformation on the oxidation behavior ofβ-NiAl + Zr

Isothermal oxidation of NiAl + Zr has been performed over the temperature range of 800–1200°C and studied by TGA, XRD, and SEM. A discontinuous decrease in growth rate of two orders of magnitude was observed at 1000° C due to the formation of -Al₂O₃ from -Al₂O₃. This transformation also resulted in a dramatic change in the surface morphology of the scales, as a whisker topography was changed into a weblike network of oxide ridges and radial transformation cracks. It is believed that the ridges are evidence for a shortcircuit outward aluminum diffusion growth mechanism that has been documented in a number of¹⁸O tracer studies.