Metal-matrix composites in the automotive industry: Opportunities and challenges

Metal-matrix composites offer considerable promise to help automotive engineers meet the challenges of current and future demands for recyclable, fuel-efficient, safe, and low-emission vehicles. These materials can be engineered to match the design requirements of automotive power-train or chassis components. Technological and infrastructural barriers tend to limit the implementation of these materials, but it is believed these barriers can be overcome and that metal-matrix composites can be applied in high-volume vehicle production. Reducing these barriers will require much effort by engineers and scientists, managers and planners at automotive manufacturers, and their suppliers. The result will be the gradual introduction of metal-matrix composites in high-volume vehicle production to satisfy customer desires while meeting regulatory requirements and competitive pressures.     

Mass-Balance Model of Pulmonary Oxygen Transport

A dynamic lumped-parameter model for pulmonary gas transport has been developed to characterize the lung and predict the effect of various parameter changes. The gas side of the lung is modeled as a series and parallel arrangement of five perfectly mixed, variable-volume compartments that correspond roughly to airway and alveolar regions. The blood side of the lung is modeled as a series of perfectly mixed, constant-volume compartments that represent the pulmonary capillary bed. From nonsteady mass balances, equations are derived which yield the time course of concentration for each compartment. Model simulations indicate that the oxygen-hemoglobin reaction does not reach equilibrium in the pulmonary capillaries, an assumption commonly made in analyses of pulmonary oxygen transport. Simulations also show the extent to which breathing amplitude and rate can affect the oxygen level in the blood leaving the lung. A comparison of simulations for a normal state and chronic obstructive lung disease (COLD) with identical input conditions demonstrates that the oxygen level in the blood leaving the lung is much lower in COLD. Also, the simulations are compared with experimental findings.     

Chemical synthesis and physiological activity of sulfonium analogues of platelet activating factor

Phosphatidylsulfocholine (PSC), the sulfonium analogue of phosphatidylcholine (PC), occurs naturally in some diatoms. The replacement of the −N⁺(CH₃)₃ group by a −S⁺(CH₃)₂ results in an increase in the polar head group size in PSC relative to that of PC, consistent with the observed increase in permeability of PSC bilayers towards urea. It was of interest to see whether replacement of the −N⁺(CH₃)₃ group in platelet activating factor (PAF) by an −S⁺(CH₃)₂ group leads to any change in platelet aggregation or other physiological activity. Synthesis of the sulfonium analogue of PAF was carried out by suitable modifications of known procedures. The PAF-sulfonium analogue was found to have almost the same platelet aggregating activity as PAF itself, in the concentration range 1–20 μM, but a much lower activity in the range 0.01–1 μM. The analogue had little or no effect on the platelet aggregation activity of PAF when added in the concentration range 0.01–1 μM and had about half the hypotensive activity of PAF towards hypertensive CDF male rats. The sulfonium analogue, however, was much more cytotoxic to HL-60 cells than PAF itself, in the concentration range 0–15 μM; replacement of the acetate group by a benzyl group increased the cytotoxicity to the level of that of the methoxy analogue of PAF. Thus, replacement of the −N⁺(CH₃)₃ group by a −S⁺(CH₃)₂ group in the polar head group region of PAF results in a relatively small change in its platelet aggregation activity and a decrease in its hypotensive activity, but greatly increases its antitumor activity. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 8–12, 1989.     

Utilising semantic technologies for intelligent indexing and retrieval of digital images

The proliferation of digital media has led to a huge interest in classifying and indexing media objects for generic search and usage. In particular, we are witnessing a colossal growth in digital image repositories that are difficult to navigate using free-text search mechanisms, which often return inaccurate matches as they in principle rely on statistical analysis of query keyword recurrence in the image annotation or surrounding text. In this paper we present a semantically-enabled image annotation and retrieval engine that is designed to satisfy the requirements of the commercial image collections market in terms of both accuracy and efficiency of the retrieval process. Our search engine relies on methodically structured ontologies for image annotation, thus allowing for more intelligent reasoning about the image content and subsequently obtaining a more accurate set of results and a richer set of alternatives matchmaking the original query. We also show how our well-analysed and designed domain ontology contributes to the implicit expansion of user queries as well as the exploitation of lexical databases for explicit semantic-based query expansion.     

Cuticular lipids of the booklouse,Liposcelis bostrychophila: hydrocarbons,aldehydes, fatty acids,and fatty acid amides

The booklouse, Liposcelis bostrychophila, is an increasingly common pest of stored food products worldwide. We report here the cuticular lipid composition of this pest (the first report of the hydrocarbons of any member of the Order Psocoptera and the first report of fatty acid amides as cuticular components for any insect). No unsaturated hydrocarbons were present. A homologous series of n-alkanes (C₂₁–C₃₄), monomethyl alkanes (3-, 4-, 5-, 7-, 9-, 11-, 12-, 13- and 15-methyl-) with a carbon chain range of C₂₈–C₄₂, and dimethyl alkanes (3, 7-; 9, 13-; 11, 15-; 13, 17-; 9, 21-; 11, 19-; and 13, 21-); with a carbon number range of C₃₁–C₄₃ were identified. The relative abundances of these hydrocarbons were low, comprising approximately 0.0125% of total biomass. The amides were a homologous series (C₁₆–C₂₂ in chain length), with the major amide being stearoyl amide. In addition to the amides, free fatty acids (C_16:1, C_16:0, C_18:2, C_18:1, and C_18:0 in chain length) and three straight chain aldehydes (C₁₅, C₁₆, and C_17:1 in chain length) also occurred as cuticular components. These findings are discussed in terms of the chemical and physiological ecology of this species.     

Anionic Clays as Potential Slow-Release Fertilizers: Nitrate Ion Exchange

Several nitrate containing anionic clays were synthesized at different temperatures and the kinetics of NO₃ ^– release were determined to test their suitability as slow-release N fertilizers. A sample (Mg:Al = 2:1) synthesized at 60°C with smaller particle size released 75, 86 and 100% of its NO₃ ^– in 1, 3 and 7 days, respectively when equilibrated with a simulated soil solution. On the other hand, the 175°C/2 hrs sample with larger particle size released 65, 77 and 84% of its nitrate in 1, 3 and 7 days, respectively. Another anionic clay (synthesized at 175°C/24 hrs) of higher charge density (Mg:Al = 2:1) containing NO₃ ^– was equilibrated with a 0.012 N NaCl or Na₂CO₃ to test the role of different anions in releasing the NO₃ ^– anion from the interlayers. The results showed that Cl^– released more NO₃ ^– than did CO₃ ^2– from this anionic clay after all the treatment times probably as a result of the CO₃ ^2– anion blocking the release of NO₃ ^– from the interior of the crystals. When a lower charge density (Mg:Al = 3:1) sample (synthesized at 175°C/48 hrs) was equilibrated with 0.02N solution of anions the release of nitrate was as follows: Cl^– < F^– < SO₄ ⁼ CO₃ ^2–. These results suggest that the divalent SO₄ ⁼ and CO₃ ^2– anions are more effective in the release of NO₃ ^– from this lower charge density anionic clay. Time-resolved structural analysis of NO₃ ^– exchange with CO₃ ^2– in the above anionic clay using synchrotron x-ray diffraction showed that ion exchange is rapid because of small crystal size and lower charge density. Thus the release of NO₃ ^– from anionic clays is an interplay among the type of anions present in soil solution, their concentration, pH of soil solution, the charge density and crystal size of anionic clay etc.     

Efficient clustering of uncertain data streams

Clustering uncertain data streams has recently become one of the most challenging tasks in data management because of the strict space and time requirements of processing tuples arriving at high speed and the difficulty that arises from handling uncertain data. The prior work on clustering data streams focuses on devising complicated synopsis data structures to summarize data streams into a small number of micro-clusters so that important statistics can be computed conveniently, such as Clustering Feature (CF) (Zhang et al. in Proceedings of ACM SIGMOD, pp 103–114, 1996) for deterministic data and Error-based Clustering Feature (ECF) (Aggarwal and Yu in Proceedings of ICDE, 2008) for uncertain data. However, ECF can only handle attribute-level uncertainty, while existential uncertainty, the other kind of uncertainty, has not been addressed yet. In this paper, we propose a novel data structure, Uncertain Feature (UF), to summarize data streams with both kinds of uncertainties: UF is space-efficient, has additive and subtractive properties, and can compute complicated statistics easily. Our first attempt aims at enhancing the previous streaming approaches to handle the sliding-window model by using UF instead of old synopses, inclusive of CluStream (Aggarwal et al. in Proceedings of VLDB, 2003) and UMicro (Aggarwal and Yu in Proceedings of ICDE, 2008). We show that such methods cannot achieve high efficiency. Our second attempt aims at devising a novel algorithm, cluUS , to handle the sliding-window model by using UF structure. Detailed analysis and thorough experimental reports on synthetic and real data sets confirm the advantages of our proposed method.     

Preparation and flame resistance properties of revolutionary self-extinguishing epoxy nanocomposites based on layered double hydroxides

Layered double hydroxides/epoxy (LDHs/EP) nanocomposites were prepared from organo-modified LDHs, a diglycidyl ether of bisphenol A monomer (DGEBA) and amine curing agents. The organo-modified LDHs were obtained by ionic exchange of a magnesium-aluminum carbonate LDH in an acid medium. X-ray diffraction and transmission electron microscopy showed a dispersion of the layers at a nanometer scale, indicating the formation of LDH/EP nanocomposites. The thermal degradation and flame resistance properties of LDH/EP nanocomposites, montmorillonite-epoxy (MMT/EP) nanocomposites, LDH/EP microcomposites and aluminum hydroxide-epoxy microcomposites were compared by thermogravimetrical analyses, simultaneous thermal analyses, UL94 and cone calorimeter tests. Only LDH/EP nanocomposites showed self-extinguishing behavior in the horizontal UL94 test; LDH/EP microcomposites and MMT/EP nanocomposites samples burned completely showing that the unique flame resistance of LDH/EP nanocomposites is related to both the level of dispersion and the intrinsic properties of LDH clay. Furthermore, cone calorimeter revealed intumescent behavior for LDH/EP nanocomposites and a higher reduction in the peak heat release rate compared to MMT/EP nanocomposites.     

Effect of moisture and particle size on the extractability of oils from seeds with supercritical CO2

Moisture level and particle size of soybeans, peanuts and cottonseed were correlated with the extraction rate and yield of oil when extracted with supercritical carbon dioxide (SC-CO₂) at a constant temperature (50 C) and pressure (8000 psig). The rate of extraction and ultimate oil yields were quite low with cracked soybeans. However, good extraction rates and nearly theoretical oil yields were obtained from ground or thinly flaked (<0.010″) seeds. Moisture levels between 3% and 12% had little effect on extracability. Oil composition was not influenced by either parameter. Scanning electron microscopy was used to study seed structure before and after extraction with SC-CO₂. Micrographs of SC-CO₂-extracted seeds were similar to hexane-extracted seeds. Presented at the AOCS Meeting, May 1983, Chicago.     

Thermogenic Effect from Nutritionally Enriched Coffee Consumption

Background  

The purpose of this study was to examine the effect of nutritionally enriched JavaFit™ (JF) coffee (450 mg of caffeine, 1200 mg of garcinia cambogia, 360 mg of citrus aurantium extract, and 225 mcg of chromium polynicotinate) on resting oxygen uptake (VO₂), respiratory exchange ratio (RER), heart rate (HR), and blood pressure (BP) in healthy and physically active individuals.