基建仓库

基建仓库项目位于莱瓦顿的Harlingervaart运河岸边,作为周边建筑的仓库,它具有独特的趣味性良好的形体感,因此被认为是立于运河沿岸广场上的一座雕塑。建筑的入口处挑出悬臂,并且顺势突出建筑南侧的体量     

A process for the production of a diacylglycerol‐based milk fat analogue

We propose a novel process for the production of a DAG‐rich acylglycerol mixture derived from milk fat. This product has potentially interesting nutritional properties, derived from both its high content of DAG and of short‐chain fatty acids (FAs). The proposed process consists of three steps: lipase‐catalysed partial ethanolysis of milk fat, extraction of the by‐product fatty acid ethyl esters (FAEEs) using supercritical carbon dioxide (SC‐CO₂) and isomerization of DAG to increase the proportion of 1,3‐DAG. The experimental investigation of the process steps was done using milk fat and trilaurin. Several lipases were tested for maximizing the percentage of DAG in the acylglycerol mixture produced by ethanolysis. The selectivity of the chosen lipase was such that the produced AG mixture was enriched in short‐chain FAs in relation to the original milk fat. FAEEs were completely extracted from the ethanolysis mixture by SC‐CO₂. In the final process step, we explored the reaction conditions for facilitating acyl migration in the DAG mixture, so that the equilibrium proportion of 1,3‐DAG (～64%) was attained. Our results set the basis for the development of a simple process for the production of a DAG‐rich milk fat analogue.     

A family of parallel QR factorization algorithms

Rapid computation of the QR factorization of a matrix is fundamental to many scientific and engineering problems. The paper presents a family of algorithms parameterized by the number of processors available P, arithmetic grain aggregation parameters g₁, g₂, …, g_P, and communication grain aggregation parameter h, which computer the QR factorization of a matrix A ∈ C^{m × n} with minimal latency. The approach is particularly well suited for dedicated distributed memory architectures such as linear arrays of INMOS Transputers, Texas Instruments C40s or Analog Devices 21060s.     

Studies of the polymerization of methacrylic acid via free-radical retrograde precipitation polymerization process

In this paper, we present some new results of our work in a novel polymerization process (called the free-radical retrograde precipitation polymerization, or FRRPP, process) that occurs at temperatures above the lower critical solution temperature. Our polymerization experiments basically involve the methacrylic acid–poly(methacrylic acid)–water system. Experimental results indicate a gradual increase in conversion with time after what seemingly is the onset of phase separation. In an equivalent solution polymerization system, conversion of methacrylic acid reaches almost 100% at a much shorter time than in the FRRPP system. Molecular weights of poly(methacrylic acid) at different times for the FRRPP system are not dramatically different from those obtained in the solution system. However, the FRRPP system yields a relatively narrow molecular weight distribution at a wide range of conversion compared to that obtained in the equivalent solution system. The unique characteristics of the FRRPP process is shown in the asymptotic time behavior of the free-radical concentration compared to the decay behavior in other polymerization systems. © 1996 John Wiley & Sons, Inc.     

Dynamic mechanical measurements: Comparison between bending and torsion methods on a graphite-reinforced and a rubber-modified epoxy

Dynamic mechanical measurements in the cantilever bending and torsion rectangular modes were compared on two epoxy samples: one unidirectionally reinforced by 42 vol.% graphite fibers, the other modified by 15 wt.% carboxy terminated acrylonitrile butadiene rubber. Two forced oscillation instruments were used: cantilever bending on a Polymer Labs DMTA and torsion with a Rheometrics System Four. In the cantilever mode, the storage modulus on both samples was measured at about two to three times too low because of compliance of the instrument. The two instruments agreed and appeared to measure accurately tan δ on the graphite-reinforced samples. Agreement was only fair on tan δ for the rubber-modified sample. Multiple frequency data were used to separate the glass-transition temperature of the rubber from the epoxy β transition. Activation energies of these transitions are within the range reported. This study demonstrates the value of forced oscillation methods and the importance of selecting sample dimensions to fit instrument limits.     

Leptosphaeria maculans-Brassica napus Battle: A Comparison of Incompatible vs. Compatible Interactions Using Dual RNASeq

Leptosphaeria maculans causes blackleg disease, which is one of the most destructive diseases of canola (Brassica napus L.). Due to the erosion of the current resistance in B. napus, it is pivotal to introduce new resistant genotypes to the growers. This study evaluated the potential of Rlm7 gene as resistance to its corresponding avirulence AvrLm7 gene is abundant. The Rlm7 line was inoculated with L. maculans isolate with AvrLm7; UMAvr7; and the CRISPR/Cas9 knockout AvrLm7 mutant, umavr7, of the same isolate to cause incompatible and compatible interactions, respectively. Dual RNA-seq showed differential gene expressions in both interactions. High expressions of virulence-related pathogen genes-CAZymes, merops, and effector proteins after 7-dpi in compatible interactions but not in incompatible interaction—confirmed that the pathogen was actively virulent only in compatible interactions. Salicyclic and jasmonic acid biosynthesis and signaling-related genes, defense-related PR1 gene (GSBRNA2T00150001001), and GSBRNA2T00068522001 in the NLR gene family were upregulated starting as early as 1- and 3-dpi in the incompatible interaction and the high upregulation of those genes after 7-dpi in compatible interactions confirmed the early recognition of the pathogen by the host and control it by early activation of host defense mechanisms in the incompatible interaction.     

Land use regression model for ultrafine particles in Amsterdam

There are currently no epidemiological studies on health effects of long-term exposure to ultrafine particles (UFP), largely because data on spatial exposure contrasts for UFP is lacking. The objective of this study was to develop a land use regression (LUR) model for UFP in the city of Amsterdam. Total particle number concentrations (PNC), PM10, PM2.5, and its soot content were measured directly outside 50 homes spread over the city of Amsterdam. Each home was measured during one week. Continuous measurements at a central urban background site were used to adjust the average concentration for temporal variation. Predictor variables (traffic, address density, land use) were obtained using geographic information systems. A model including the product of traffic intensity and the inverse distance to the nearest road squared, address density, and location near the port explained 67% of the variability in measured PNC. LUR models for PM2.5, soot, and coarse particles (PM10, PM2.5) explained 57%, 76%, and 37% of the variability in measured concentrations. Predictions from the PNC model correlated highly with predictions from LUR models for PM2.5, soot, and coarse particles. A LUR model for PNC has been developed, with similar validity as previous models for more commonly measured pollutants.     

Relations between environmental black carbon sorption and geochemical sorbent characteristics

Pyrogenic carbon particles in sediments (soot and charcoal, collectively termed "black carbon" or BC) appear to be efficient sorbents of many hydrophobic organic compounds, so they may play an important role in the fate and toxicity of these substances. To properly model toxicant sorption behavior, it is important to (i) quantify the magnitude of the role of BC in sorption and (ii) elucidate which geochemical BC characteristics determine the strength of environmental BC sorption. Sorption isotherms of d10-phenanthrene (d10-PHE) were determined over a wide concentration range (0.0003-20 microg/L), for five sediments with widely varying characteristics. From the sorption isotherms, we determined Freundlich coefficients of environmental BC sorption, K(F,BCenv. These varied from 10(4.7) to 10(5.5). From the data, it could be deduced that BC was responsible for 49-85% of the total d10-PHE sorption at a concentration of 1 ng/L. At higher concentrations, the importance of BC for the sorption process diminished to <20% at 1 microg/L and 0-1% at 1 mg/L. There were no significant relationships between BC sorption strength and the tested geochemical BC characteristics [the fraction of small (<38 microm) BC particles, the BC resistance to high-temperature oxidation, the fraction of biomass-derived BC, the native polycyclic aromatic hydrocarbon and total organic carbon contents]. Because of the limited variation in BC sorption strength with widely varying BC characteristics, the presented BC sorption coefficients may putatively be used as generic starting points for environmental modeling purposes.