Modelling of fluid properties in hydraulic positive displacement machines

This paper presents a numerical model for the simulation of a swash-plate axial piston pump, focusing on the characterization of fluid properties.As it is well known, the reduction of flow oscillations (which generates pressure ripples and produces vibration and noise in the entire circuit) and the avoidance of cavitation are the major problems in the design of these pumps. Developing a simulation code can be very useful for component optimisation in order to predict and reduce the undesired phenomena. The paper first gives a quick overview on a previously developed pump model; afterwards four different models of the fluid are presented: they take into account cavitation in different ways. Their aim at characterizing as well as possible the unsteady and erratic cavitation features in a simplified manner, in order to apply the models to the simulation of hydraulic components.In the second part of the paper an application is shown of these models to an axial piston pump: a few results are presented and compared with available test data. The effects of the fluid models on the predicted pump performance are shown and commented.     

Incremental value of prognostic testing in patients with known or suspected ischemic heart disease: a basis for optimal utilization of exercise technetium-99m sestamibi myocardial perfusion single-photon emission computed tomography

OBJECTIVES: This study assessed the incremental prognostic implications of normal and equivocal exercise technetium-99m (Tc-99m) sestamibi single-photon emission computed tomography (SPECT) and sought to determine its incremental prognostic value, impact on patient management and cost implications. BACKGROUND: The prognostic implications of Tc-99m sestamibi SPECT are not well defined, and risk stratification using this test has not been explored. METHODS: We studied 1,702 patients referred for exercise Tc-99m sestamibi SPECT who were followed up for a mean (+/- SD) of 20 +/- 5 months. Patients with previous percutaneous transluminal coronary angioplasty or coronary artery bypass surgery were excluded. The SPECT studies were assessed using semiquantitative visual analysis. Cardiac death and myocardial infarction were considered "hard" events, and coronary angioplasty and bypass surgery > 60 days after testing were considered "soft" events. RESULTS: Of the 1,702 patients studied, 1,131 had normal or equivocal scan results. A total of 10 events occurred in this group (1 cardiac death and 1 myocardial infarction [0.2% hard events]; 4 coronary angioplasty and 4 bypass surgery procedures [0.7% soft events]). The rates of hard events and referral to catheterization after SPECT were similarly low in patients with a low (< 0.15), intermediate (0.15 to 0.85) and high (> 0.85) post-exercise treadmill test (ETT) likelihood of coronary artery disease. With respect to scan type, patients with normal, probably normal or equivocal scan results had similarly low hard event rates. In the 571 patients with abnormal scan results, there were 43 hard events (7.5%) and 42 soft events (7.4%) (p < 0.001 vs. 1,131 patients with normal scan results for both). When the complete spectrum of scan responses was considered, SPECT provided incremental prognostic value in all patient subgroups analyzed. However, the nuclear scan was cost-effective only in patients with interpretable exercise ECG responses and an intermediate to high post-ETT likelihood of coronary artery disease and in those with uninterpretable exercise ECG responses and an intermediate to high pre-ETT likelihood of coronary artery disease. CONCLUSIONS: Normal or equivocal exercise Tc-99m sestamibi study results are associated with a benign prognosis, even in patients with a high likelihood of coronary artery disease. Although incremental prognostic value is added by nuclear testing in all patient subgroups, a testing strategy incorporating nuclear testing proved to be cost-effective only in the groups with an intermediate to high likelihood of coronary artery disease before scanning.     

Utilization of electrochemical impedance spectroscopy for monitoring bornite (Cu5FeS4) oxidation by Acidithiobacillus ferrooxidans

In this work, the monitoring of the bacterial and chemical dissolution of bornite was evaluated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS); the mineral surface was examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The analysis of CV results allowed attributing the different peaks observed in both direct and reverse potential scanning to the oxidation of bornite to a secondary covellite and its reduction via different non stoichiometric copper sulphides intermediaries. EIS data for bornite were obtained in control medium up to 78 h of immersion, when a cellular suspension of A. ferrooxidans was added and the experiments continued up to a 192 h of test. The EIS response was different when bacteria were added in the beginning of the test or after some hours of immersion in acid solution. The experiments were performed in different cell configurations and a model of the electrode/electrolyte interface. The correspondent equivalent electrical circuit was used to fit impedance spectra for all studied conditions. A common equivalent circuit used for corrosion processes where anodic (degradation of the mineral) and cathodic (oxygen reduction) reactions occur in parallel, together film and biofilm formation was proposed.     

A 2.7-V CMOS single-chip baseband processor for CT2/CT2+ cordlesstelephones

A low-voltage, low-power CMOS single-chip baseband processor for CT2 and CT2+ cordless telephones is presented. The chip integrates a complete voiceband codec, a tone generator, a G721 adaptive differential pulse code modulation coder/decoder, a burst-mode logic controller for CT2/CT2+ framings, and an I/Q baseband signal generator. The only external components are made of two quartz crystals. The chip is interfaced with standard microcontrollers through a parallel interface. With a 2.7 V minimum supply, it consumes normal and standby powers of 35 mW and 25 μW, respectively. Maximum supply is 5.5 V, and temperature range is from -40 to 70°C. Chip area (including scribe line) is 55.5 mm² in a 0.8 μm N-well double-metal single-poly CMOS process with implanted capacitors     

Agents’ model of uncertainty

Multi-agent systems play an increasing role in sensor networks, software engineering, web design, e-commerce, robotics, and many others areas. Uncertainty is a fundamental property of these areas. Agent-based systems use probabilistic and other uncertainty models developed earlier without explicit consideration of agents. This paper explores the impact of agents on uncertainty models and theories. We compare two methods of introducing agents to uncertainty theories and propose a new theory called the agent-based uncertainty theory (AUT). We show advantages of AUT for advancing multi-agent systems and for solving an internal fundamental question of uncertainty theories, that is identifying coherent approaches to uncertainty. The advantages of AUT are that it provides a uniform agent-based representation and an operational empirical interpretation for several uncertainty theories such as rough set theory, fuzzy sets theory, evidence theory, and probability theory. We show also that the introduction of agents to intuitionist uncertainty formalisms can reduce their conceptual complexity. To build such uniformity the AUT exploits the fact that agents as independent entities can give conflicting evaluations of the same attribute. The AUT is based on complex aggregations of crisp (non-fuzzy) conflicting judgments of agents. The generality of AUT is derived from the logical classification of types (orders) of conflicts in the agent populations. At the first order of conflict, the two agent populations are disjoint and there is no interference of logic values assigned to any statement p and its negation by agents. The second order of conflict models superposition (interference) of logic values for overlapping agent populations where an agent assigns conflicting logic values (true, false) to the same attribute simultaneously.

Repeatability of treadmill exercise ejection fraction and wall motion using technetium 99m-labeled sestamibi first-pass radionuclide ventriculography

Bacterial antibodies were studied in acute, intermediate and convalescent phase sera (mean duration from first to last sample 36 days) of 121 children hospitalized for acute lower respiratory tract infection. Antibody responses were observed in 45% of all cases and in 29% of the 21 children < 1 year old. A total of 15 responses to Streptococcus pneumoniae (pneumolysin), 20 to Haemophilus influenzae, 9 to Moraxella catarrhalis, 3 to chlamydiae and 8 to Mycoplasma pneumoniae were found. In 79 patients with 4 consecutive samples available, 52% of the 31 responses were measurable within 5 days from admission. Overall the responses were not associated with upper respiratory tract bacterial findings or acute otitis media. Significantly more responses were found in the 121 children with acute lower respiratory tract infection than in healthy controls (P < 0.007). We conclude that bacterial antibody assays provide a useful tool in the study of the etiology of acute lower respiratory tract infection in young children, even if the interval between paired serum samples is short.