横向剪切和旋转惯性影响下管道内流动液体的小振动

当考虑旋转惯性的影响时,流经管道横截面的液体在剪切作用下,会产生小振动.本文推导出无量纲参数表示的系统微分方程.对于某些问题的确定值,使用Galerkin方法,可以得到主振动频率和临界速度.在此基础上,还将研究结果和经典理论值进行了比较.     

P Systems with Mobile Membranes

P systems with active membranes are among the central ones in membrane computing, and they were shown to be both computationally universal (able to simulate Turing machines) and computationally efficient (able to solve hard problems in polynomial time). However, in all cases, these results were obtained by making use of several powerful features, such as membrane polarization, label changing, division of non-elementary membranes, priorities, or cooperative rules. This paper contributes to the research effort of introducing a class of P systems with active membranes having none of the features mentioned above, but still preserving the power and the efficiency. The additional feature we consider instead are the operations of endocytosis and exocytosis: moving a membrane inside a neighboring membrane, or outside the membrane where it is placed. We investigate the power and the efficiency of these systems (also using membrane division) by first proving that they can simulate (with a linear slowdown and without introducing non-determinism) rewriting P systems with 2-replication, for which the universality and the possibility of solving NP-complete problems in polynomial time are known. In this way, the universality and efficiency are also obtained for our systems. We also give a direct and simple proof for the universality result – without using division rules (the proof uses nine membranes, but we do not know whether this number can be decreased).     

Multidimensional analogs of the kendall equation for priority queueing systems: computational aspects

An analogy between celebrated Kendall equation for busy periods in the system M|GI|1 and analytical results for busy periods in the priority systemsM _r |GI _r |1 is drawn. These results can be viewed as generalizations of the functional Kendall equation. The methodology and algorithms of numerical solution of recurrent functional equations which appear in the analysis of such queueing systems are developed. The efficiency of the algorithms is achieved by acceleration of the numerical procedure of solving the classical Kendall equation. An algorithm of calculation of the system workload coefficient calculation is given.     

Experimental characterization of electrostatically actuated in-plane bending of microcantilevers

Experimental validation of numerical models developed by the authors to predict the static behaviour of microelectrostatic actuators is described. Cantilever microbeams, currently used in connection with RF-MEMS and micro-scale material testing were analysed. A set of microcantilevers, bending in the plane of the wafer, i.e. in the same plane as the profiling system’s target, was tested. This differs from the popular case of out-of-plane microbeams, usually studied in the literature. Geometry nonlinearity caused by large deflection of the microbeam was investigated and nonlinear coupled formulation of electromechanical equilibrium was performed. Coupled-field analysis was implemented using the Finite Element Method (FEM), to predict displacements and pull-in voltage measured by Fogale Zoomsurf 3D, subsequently plotting the displacement-versus-voltage curve to complete model validation. FEM nonlinear analysis, based on iterative approach with mesh morphing, and FEM non-incremental approach, including a special element proposed by the authors, are compared to the linear solution and to experimental results. Geometry nonlinearity appears relevant in microbeam modelling and requires a nonlinear solution of the coupled problem. Investigative work, which compared the results of 2D and 3D models to experimental data, revealed that some three dimensional effects are significant in model validation, but the 2D approach may be effective in predicting static behaviour provided that at least a microbeam thickness equivalent is adopted.     

Evaluation of effective parameters in metal bellows forming process

Metal bellows have wide applications in aerospace, micro-electromechanical and industrial systems. Forming process of the metal bellows is very sensitive to increasing the ratio of crown to root diameter. In this state, precise control of the parameters is very important in order to form high-quality metal bellows with good thickness distribution and desirable dimensions and resilience. In this paper, a new method has been proposed for manufacturing of the metal bellows and important parameters such as initial length of tube, internal pressure, axial feeding and velocity, mechanical properties and the type of materials were investigated by finite element (FE) analysis (LS-Dyna) and experimental tests. The explicit time integration method is used for modeling the tube-bulging and folding processes. Meanwhile, the implicit time integration method is used for the spring back stage. Finally, the results of finite element method (FEM) and experiments show a very good agreement. The results of the present work could be used as a basis of designing a new type of the metal bellows.     

Synthesis of nanocrystalline Bi2Te3 via mechanical alloying

Bi₄₀Te₆₀ thermoelectric compound was fabricated via mechanical milling of bismuth and tellurium as starting materials. Effect of the milling time and heat treatment temperatures were investigated. In order to characterize the ball milled powders, the X-ray diffraction (XRD) was used. Thermal behavior of the mechanically alloyed powders was studied by differential thermal analysis (DTA). The morphological evolutions were studied by scanning electron microscopy (SEM). Results showed that the nanocrystalline Bi₂Te₃ compound was formed after 5 h of milling. Further milling (25 h) and heating to 500 °C showed that the synthesized phase was stable during these conditions. Nanocrystalline Bi₂Te₃ with 9–10 nm mean grain size and flaky morphology (lamellar structure) was obtained at the end of milling.     

Optimization of STM/FIM nanotip aspect ratio based on the Taguchi method

This paper presents optimization of electrochemical etching parameters to achieve the optimum aspect ratio of the scanning tunneling microscopy/field ion microscopy tungsten nanotip by using Taguchi method. The combination of optimum level of process parameters was obtained by using the analysis of signal-to-noise ratio. The level of importance of the process parameters on the nanotip aspect ratio was determined by using analysis of variance. It was found that the optimum level of process parameters are electrolyte concentration of 2 M/lit, wire immersion length of 2.5 mm, cathode tube inner diameter of 40 mm, and voltage of 3.5 V. Within the range of experiments and the process parameters in terms of impact significance were found to be electrolyte concentration, process voltage, wire immersion length, and inner diameter of cathode tube, respectively. By using the optimum level of the process parameters, the nanotip aspect ratio was enhanced by 263% in comparison to the mean value of the experimental results. The nanotip aspect ratio of up to 163:1 was obtained in the present research.     

Analysis and test procedures for NOR flash memory defects

Widespread use of non-volatile memories, especially flash memories, in diverse applications such as in mobile computing and system-on-chip is becoming a common place. As a result, testing them for faults and reliability is drawing considerable interest of designers and researchers. One of the most predominant failure modes for which these memories must be tested is called disturb faults. In this paper, we first analyze different defects that are responsible for disturb faults using a 2-dimension device simulator. We determine the impact of various defects on cell performance and develop a methodology based on channel erase technique to detect these defects. Our tests are efficient and can be converted to march tests prevalently used to test memories. We also propose a very low cost design-for-testability approach that can be used to apply the test technique developed in this paper.     

Effect of amounts and sequence of additions of urea and water on hydrolysis of surface-applied granular urea in unsaturated soils

The hydrolysis of surface-applied granular urea ( 15 mg of urea/particle) in 14 unsaturated soils as influenced by the amounts and the sequence of additions of urea and water and studied using open and covered soil column systems was in the following order: well-mixed surface-applied surface-applied surface-applied urea, granular urea, granular urea, granular urea, water added > water added > water added water added before, after, before, before, no drying no drying no drying drying The retarded hydrolysis' of surface-applied granular urea is attributed to retarded soil urease activity. Under the nondrying and drying conditions, the positive effect of increasing amounts of added water on the hydrolysis was less apparent when water was added 24–48 hours before than when it was added immediately after surface application of granular urea. When an increasing number of urea granules were evenly placed on a finite surface of unsaturated soil, the rate of urea application (quantity factor) increased but the percentage of urea hydrolyzed remained practically unchanged. These results suggest that it is necessary to consider effective urea concentration and effective urease activity for adequate understanding of in situ hydrolysis of broadcast fertilizer urea in unsaturated soil.