Stability-based routing,link scheduling and channel assignment in cognitive radio mobile ad-hoc networks

One fundamental issue in cognitive radio mobile ad hoc networks (CR-MANETs) is the selection of a stable path between any source and destination node to reduce the end-to-end delay and energy consumption arisen from route reconstruction. In this way, we analyse the link stability by calculating the link life time that is dependent on failures caused by secondary users’ (SUs) movements and primary users’ (PUs) activities. We propose a joint stability-based routing, link scheduling and channel assignment (SRLC) algorithm in CR-MANETs, which is benefited from considering the link life time, amount of interference imposed on PUs and energy consumption. The proposed algorithm selects a frequency channel/time slot in a way that channel utilization and previous behaviours of SUs and PUs, are taken into account. In the proposed SRLC, the concept of load balancing is applied by avoiding to route packets through SUs with insufficient energy. The effectiveness of the proposed algorithm is verified by evaluating the aggregate interference energy, end-to-end delay, goodput and the energy usage per packet transmission under three different scenarios. The results show our proposed scheme finds better routes compared to the recently proposed joint stable routing and channel assignment protocol.

     

A new low-power 10T SRAM cell with improved read SNM

This paper describes the characteristics of a new 10T structure for SRAM cell that works quite well in the sub-threshold region. This new architecture has good characteristics in write and read delay and energy compared with other new structures. This new 10T topology improves read static noise margin (SNM) and write operation speed with respect to other topologies in the same or even lower power consumption. The new topology has at least 13% lower power consumption compared with the best of recent architectures. Its write characteristics also are similar to those of 6T-SRAM, which has improved write delay and energy. The new 10T SRAM cell also consumes lower power compared with other cells. The stacking is used to suppress the standby leakage through the read path. The simulations were performed using HSPICE 2011 in a 16 nm bulk CMOS Berkeley predictive technology model (BPTM).     

Phase-equilibrium data and liquidus for the system “MnO”-CaO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> at Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/SiO<Subscript>2</Subscript> of 0.55 and 0.65

Phase-equilibrium data and liquidus isotherms for the system “MnO”-CaO-(Al₂O₃+SiO₂) at silicomanganese alloy saturation have been determined in the temperature range of 1373 to 1723 K. The results are presented in the form of the pseudoternary sections “MnO”-CaO-(Al₂O₃+SiO₂) with Al₂O₃/SiO₂ weight ratios of 0.55 and 0.65. The primary-phase fields have been identified in this range of conditions.     

Kinetics of polymerization of dimer fatty acids with ethylenediamine

A generally applicable stoichiometric and kinetic model was developed for the polymerization of dimer fatty acids with ethylenediamine. The rate equations were second‐order before 90% conversion and were used between 405 and 475 K. The parameters of the rate equations were determined with nonlinear regression analysis. A comparison of the model predictions and the experimental data showed that the approach was useful in predicting the polymerization kinetics. The equilibrium constant changed from 3.175 to 7.311. The frequency factor and activation energy for the forward rate constant before 90% conversion were 2,716,894 kg mol^?1 min^?1 and 66.7 kJ mol^?1, respectively. The equilibrium constant was independent of the temperature at frequency factor and activation energy values of 74.4 and 9.7 kJ mol^?1, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2504–2513, 2004     

Study on kinetics of polymerization of dimer fatty acids with ethylenediamine in the presence of catalyst

A generally applicable stoichiometric and kinetic model was developed for the polymerization of dimer fatty acids with ethylenediamine in the presence of phosphoric acid as catalyst. Rate equation used is based on second order and the temperatures are between 405 and 475 K with mixing rate of 75 rpm. The parameters of the rate equations are determined using nonlinear regression analysis. Comparison of the model predictions with the experimental data show that the approach is useful in predicting the polymerization kinetic. Equilibrium constant changes from 2.432 to 17.765. Frequency factor and activation energy for forward rate constant are 362306102.681 kg mol⁻¹ min⁻¹ and 83.24 kJ mol⁻¹, respectively. The equilibrium constant is independent of temperature with frequency factor and activation energy values of 17317.97 and 28.65 kJ mol⁻¹, respectively.     

UPLC and HPLC of caffeoyl esters in wild and cultivated Arctium lappa L.

Analytical methods including ultra-performance liquid chromatography (UPLC) and high-performance liquid chromatography (HPLC) with photodiode array (PDA) detector were developed for the analysis of caffeoylquinic acid derivatives in seeds, leaves and roots of Arctium lappa L. Separation was performed on C₁₈ column utilising 5% (v/v) acetic acid in water and acetonitrile at 330 nm. Both methodologies were validated in terms of linearity, precision, and recovery. The results showed that the major advantages of UPLC, over HPLC were the fast analysis, narrow peaks, high sensitivity, and reduction of solvent consumption. Subsequently the methods were applied for the identification and quantification of chlorogenic acid (5-CQA) and 1,5-dicaffeoylquinic acid (1,5-DCQA) as main compounds in samples. The total phenolic content of samples ranged from 3.93 to 14.13 g of 5-CQA equivalent/100 g dry weight (DW). There was a significant variability from 89 to 571 mg/100 g for 5-CQA and 48 to 486 mg/100 g for 1,5-DCQA in dry material.     

Preparation of dynamically vulcanized thermoplastic elastomer nanocomposites based on LLDPE/reclaimed rubber

Dynamically vulcanized thermoplastic elastomers nanocomposites (TPV nanocomposites) based on linear low density polyethylene (LLDPE)/reclaimed rubber/organoclay were prepared via one‐step melt blending process. Maleic anhydride grafted polyethylene (PE‐g‐MA) was used as a compatibilizing agent. The effects of reclaimed rubber content (10, 30, and 50 wt %), nanoclay content (3, 5, and 7 wt %), and PE‐g‐MA on the microstructure, thermal behavior, mechanical properties, and rheological behavior of the nanocomposites were studied. The TPV nanocomposites were characterized by X‐ray diffraction, transmission electron microscopy, scanning electron microscopy (SEM), differential scanning calorimeter, mechanical properties, and rheometry in small amplitude oscillatory shear. SEM photomicrographs of the etched samples showed that the elastomer particles were dispersed homogeneously throughout the polyethylene matrix and the size of rubber particles was reduced with introduction of the organoclay particles and compatibilizer. The effects of different nanoclay contents, different rubber contents, and compatibilizer on mechanical properties were investigated. Increasing the amount of nanoclay content and adding the compatibilizer result in an improvement of the tensile modulus of the TPV nanocomposite samples. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Joint load balanced stable routing and communication segment assignment in mobile cognitive radio ad‐hoc networks

The fundamental issues in mobile cognitive radio ad‐hoc networks are the selection of the optimal stable paths between nodes and proper assignment of the frequency channels/time slots (communication segments) to the links. In this paper, a joint load balanced stable routing and communication segment assignment algorithm is proposed that considers jointly the mobility prediction, mitigating the co‐channel interference and energy consumption. The novelty of the proposed algorithm lies in the increasing of the path stability, which benefits from the maximum link lifetime parameter and introduced weighting function to keep routes away from the PU's region. This avoids the negative impacts on the PUs' operations and decreases the conflict of the cognitive nodes. In the proposed algorithm, the concept of load balancing is considered that yields in the balancing energy consumption in the network, improving the network performance and distributing traffic loads on all available channels. The effectiveness of the proposed algorithm is verified by evaluating the aggregate interference energy, average end‐to‐end delay, goodput, and the energy usage per packet under 6 scenarios. The results show that the performance of the proposed algorithm is significantly better than the recently proposed joint stable routing and channel assignment protocol.