Human‐Finger Electronics Based on Opposing Humidity‐Resistance Responses in Carbon Nanofilms

Carbon nanomaterials have excellent humidity sensing properties. Here, it is demonstrated that multiwalled carbon‐nanotube (MWCNT)‐ and reduced‐graphene‐oxide (rGO)‐based conductive films have opposite humidity/electrical resistance responses: MWCNTs increase their electrical resistance (positive response) and rGOs decrease their electrical resistance (negative response). The authors propose a new phenomenology that describes a “net”‐like model for MWCNT films and a “scale”‐like model for rGO films to explain these behaviors based on contributions from junction resistances (at interparticle junctions) and intrinsic resistances (of the particles). This phenomenology is accordingly validated via a series of experiments, which complement more classical models based on proton conductivity. To explore the practical applications of the converse humidity/resistance responses, a humidity‐insensitive MWCNT/rGO hybrid conductive films is developed, which has the potential to greatly improve the stability of carbon‐based electrical device to humidity. The authors further investigate the application of such films to human‐finger electronics by fabricating transparent flexible devices consisting of a polyethylene terephthalate substrate equipped with an MWCNT/rGO pattern for gesture recognition, and MWCNT/rGO/MWCNT or rGO/MWCNT/rGO patterns for 3D noncontact sensing, which will be complementary to existing 3D touch technology.     

A new and fast method to determine mixing and conductive cooling of thermal waters in carbonate-evaporite environments

A method is proposed, for low-temperature geothermal systems, for calculating the aquifer temperature and relative proportions of mixed thermal and shallow groundwaters from carbonate-evaporite environments. The fluid is assumed to be in chemical equilibrium with anhydrite and chalcedony in the aquifer, and mixed with diluted waters during its ascent. An attempt has been made to establish a relationship between reservoir temperature, the aqueous sulfate and silica contents of the mixed fluid, the proportion of the thermal end-member and the temperature of the adiabatic mixture. The method calculates mineral solubilities in the field context, calibrated on representative thermal springs. The method also considers the effects of conductive cooling.     

Finance and the technology-trade nexus

This paper sketches the contours of the evolving international/monetary system and examines the various roles of the intemediation mechanisms. Then it examines the extent to which the financial system is independent from the “real economy” and the various ways in which it impacts it. The paper discusses some views in good currency on the dynamics of the technology-trade-finance nexus and shows how the financial system influences organization, location and technology choices in meso-innovation systems. The final section of the paper looks at the policy implications that might be derived from the analysis and suggests some directions for the future research.     

Modélisation de la cinétique de biodégradation de phénol par granules aérobies

This work describes a model of the biodegradation of phenol carried out by aerobic granules. These granules were obtained by culturing an activated sludge supernatant in a sequencing batch reactor fed with a synthetic waste water and subsequently, by acclimation to phenol (100 mg/L). The kinetics of phenol biodegradation by the aerobic granules was investigated over a wide range of initial phenol concentrations (40–1112 mg/L) in shake‐flask cultures. A Haldane‐type model was adjusted to the experimental results, which depicts successfully the phenol biodegradation profiles in the entire range of initial concentrations studied by using only one set of parameters. It is our view that the proposed model could contribute to the knowledge about the ability of aerobic granular systems to biodegrade toxic, inhibitory compounds such as phenol.     

Three‐dimensional localization for the MagneBike inspection robot

The MagneBike inspection robot is a climbing robot equipped with magnetic wheels. The robot is designed to drive on three‐dimensional (3D) complexly shaped pipe structures; therefore it is necessary to provide 3D visualization tools for the user, who remotely controls the robot out of sight. The localization system is required to provide a 3D map of the unknown environment and the 3D location of the robot in the environment's map. The localization strategy proposed in this paper consists of combining 3D odometry with 3D scan registration. The odometry model is based on wheel encoders and a three‐axis accelerometer. Odometry enables the tracking of the robot trajectory between consecutive 3D scans and is used as a prior for the scan matching algorithm. The 3D scan registration facilitates the construction of a 3D map of the environment and refines the robot position computed with odometry. This paper describes in detail the implementation of the localization concept. It presents the lightweight, small‐sized 3D range finder that has been developed for the MagneBike. It also proposes an innovative 3D odometry model that estimates the local surface curvature to compensate for the absence of angular velocity inputs. The different tools are characterized in detail based on laboratory and field experiments. They show that the localization concepts reliably track the robot moving in the specific application environment. We also describe various techniques to optimize the 3D scanning process, which is time consuming, and to compensate for the identified limitations. These techniques are useful inputs for the future automatization of the robot's control and optimization of its localization process. © 2010 Wiley Periodicals, Inc.     

Hydraulic behaviour of a representative structural volume for containment buildings

For particular structures like containment buildings of nuclear power plants, the study of the hydraulic behaviour is of great concern. These structures are indeed the third barrier used to protect the environment in case of accidents. The evolution of the leaking rate through the porous medium is closely related to the changes in the permeability during the ageing process of the structure. It is thus essential to know the relation between concrete degradation and the transfer property when the consequences of a mechanical loading on the hydraulic behaviour have to be evaluated. A chained approach is designed for this purpose. The mechanical behaviour is described by an elastic plastic damage formulation, where damage is responsible for the softening evolution while plasticity accounts for the development of irreversible strains. The drying process is evaluated according to a non-linear equation of diffusion. From the knowledge of the damage and the degree of saturation, a relation is proposed to calculate the permeability of concrete. Finally, the non-homogeneous distribution of the hydraulic conductivity is included in the hydraulic problem which is in fact the association of the mass balance equation for gas phase and Darcy law. From this methodology, it is shown how an indicator for the hydraulic flows can be deduced.     

Approximation of functions by perceptrons: a new approach

We provide a constructive proof of the theorem of function approximation by perceptrons (cf Leshno et al. [1], Hornik [2]) when the activation function ψ isC∞ with all its derivatives non 0 at 0. We deal with uniform approximation on compact sets of continuous functions on ℜ ^d ,d≥1. This approach is elementary and provides some approximation results for the derivatives along with some bounds for the hidden layer.     

Correlation between machining direction,cutter geometry and step-over distance in 3-axis milling: Application to milling by zones

Computer-Aided Manufacturing (CAM) occupies an increasingly important role in engineering with all it has to offer in terms of new possibilities and improving designer/manufacturer productivity. The present study addresses machining of free-form surfaces on a 3-axis NC machine tool. There have recently been a large number of studies devoted to planning tool paths on free-form surfaces with various strategies being adopted. These strategies are intended to increase efficiency by reducing the overall length of machining. Often, the choice of the cutter is arbitrary and the work focuses on planning. In order to boost productivity, the present work offers assistance in choosing the cutting tool, the machining direction and cutting by surface zones, adopting a milling strategy by parallel planes. To do so, a comparison is made between milling using a spherical end milling cutter and a torus end milling cutter with the same outer radius. This comparison relates to the radius of curvature of the trace left by the cutter at the point of contact between the tool and the workpiece in relation to the direction of feed motion.