The AFLATOX® Project: Approaching the Development of New Generation,Natural-Based Compounds for the Containment of the Mycotoxigenic Phytopathogen Aspergillus flavus and Aflatoxin Contamination

The control of the fungal contamination on crops is considered a priority by the sanitary authorities of an increasing number of countries, and this is also due to the fact that the geographic areas interested in mycotoxin outbreaks are widening. Among the different pre- and post-harvest strategies that may be applied to prevent fungal and/or aflatoxin contamination, fungicides still play a prominent role; however, despite of countless efforts, to date the problem of food and feed contamination remains unsolved, since the essential factors that affect aflatoxins production are various and hardly to handle as a whole. In this scenario, the exploitation of bioactive natural sources to obtain new agents presenting novel mechanisms of action may represent a successful strategy to minimize, at the same time, aflatoxin contamination and the use of toxic pesticides. The Aflatox^® Project was aimed at the development of new-generation inhibitors of aflatoxigenic Aspergillus spp. proliferation and toxin production, through the modification of naturally occurring molecules: a panel of 177 compounds, belonging to the thiosemicarbazones class, have been synthesized and screened for their antifungal and anti-aflatoxigenic potential. The most effective compounds, selected as the best candidates as aflatoxin containment agents, were also evaluated in terms of cytotoxicity, genotoxicity and epi-genotoxicity to exclude potential harmful effect on the human health, the plants on which fungi grow and the whole ecosystem.     

A low-cost real time virtual system for postural stability assessment at home

Background and objective

The degeneration of the balance control system in the elderly and in many pathologies requires measuring the equilibrium conditions very often. In clinical practice, equilibrium control is commonly evaluated by using a force platform (stabilometric platform) in a clinical environment.In this paper, we demonstrate how a simple movement analysis system, based on a 3D video camera and a 3D real time model reconstruction of the human body, can be used to collect information usually recorded by a physical stabilometric platform.

Methods

The algorithm used to reconstruct the human body model as a set of spheres is described and discussed. Moreover, experimental measurements and comparisons with data collected by a physical stabilometric platform are also reported. The measurements were collected on a set of 6 healthy subjects to whom a change in equilibrium condition was stimulated by performing an equilibrium task.

Results

The experimental results showed that more than 95% of data collected by the proposed method were not significantly different from those collected by the classic platform, thus confirming the usefulness of the proposed system.

Conclusions

The proposed virtual balance assessment system can be implemented at low cost (about 500$) and, for this reason, can be considered a home use medical device. On the contrary, astabilometric platform has a cost of about 10,000$ and requires periodical calibration. The proposed system does not require periodical calibration, as is necessary for stabilometric force platforms, and it is easy to use. In future, the proposed system with little integration can be used, besides being an emulator of a stabilometric platform, also to recognize and track, in real time, head, legs, arms and trunk, that is to collect information actually obtained by sophisticated optoelectronic systems.     

Niobium Containing Micro-, Meso- and Macroporous Silica Materials as Catalysts for the Epoxidation of Olefins with Hydrogen Peroxide

Niobia–silica mesoporous materials (xerogel, aerogel and MCM type) have been synthesized by sol–gel techniques using different co-solvents as templates. All materials are active catalysts in the epoxidation of cyclohexene with hydrogen peroxide, but only meso–macroporous aerogels give a stable and recyclable catalyst.     

Selective catalytic transformations of methanol to C2-C3 hydrocarbons over the new zeolite type LZ 132

The small pore zeolite HLZ 132 exhibits, in comparison with other zeolites, an increased selectivity for the transformation of methanol to ethylene in the reaction temperature range 350–500 °C: the weight ratio of C₂H₄ to C₃H₆ in the products ranges between 1 and 4 at WHSV=2 h^–1. Besides the effect of the reactant shape selectivity this fact may be interpreted by the participation of the asymmetrical methoxy groups in the surface as well as by proton-donor centres of lower acidity which do not catalyze the oligomerization of ethylene but which do the more basic molecule of propylene, thereby generating polyene-type coke.     

Fine coal desulphurization by leaching with bromine containing hydrobromic acid

Sulphur extraction from coal by leaching with bromine-containing aqueous hydrobromic acid has been investigated in the temperature range from ambient to 120 °C. This procedure was found to be selective for the removal of high levels of sulphate and pyritic sulphur within a few minutes of leaching, while no significant reduction of the organic sulphur could be observed. Leaching led to an appreciable reduction of the ash yield and the up-take of substantial quantities of bromine. The bromine can be removed as hydrogen bromide by thermal treatment under nitrogen, without significant loss of volatile matter; for reduction of the bromine level to below 0.1 wt%, treatment for at least 1 h at ≈ 500 °C was needed.     

Strength Analysis of Self-Supported Films Produced by Aqueous Electrophoretic Deposition

The goal of this work is to study the feasibility of the characterization of the fracture strength of porous alumina/zirconia thin layers by three-point bending and Weibull analysis. Films have been obtained by electrophoretic deposition on graphite and thermo-gelation of the deposit with carrageenan. On sintering, graphite is burned out and self-supported films are obtained. Strength values are well fitted to a simple two-parameter Weibull distribution. The fracture origins are subcritical growth cracks that originated at the surface irregularities associated with the processing method. A Weibull modulus around 3 is obtained.     

Straightforward modeling of dynamic I–V characteristics for microwave FETs

This work presents a straightforward approach aimed at modeling the dynamic I–V characteristics of microwave active solid‐state devices. The drain‐source current generator represents the most significant source of nonlinearity in a transistor and, therefore, its correct modeling is fundamental to predict accurately the current and voltage waveforms under large‐signal operation. The proposed approach relies on using a small set of low‐frequency time‐domain waveform measurements combined with numerical optimization‐based estimation of the nonlinear model parameters. The procedure is applied to a gallium nitride HEMT and silicon FinFET. The effectiveness of the modeling procedure in terms of prediction accuracy and generalization capability is demonstrated by validation of the extracted models under operating conditions different than the ones used for the parameters estimation. Good agreement between measurements and model simulations is achieved for both technologies and in both low‐ and high‐frequency range. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:109–116, 2014.     

Ceramic Microtubes from Preceramic Polymers

A novel process for the production of ceramic microtubes involving the microextrusion of preceramic polymers was studied. Microtubes with a wide range of inner and outer diameters and several centimeters long were produced from two silicone resins. A coextrusion approach was also used to extend the forming capability of the technique. The addition of carbon black resulted in electrically conductive silicon oxycarbide (SiOC) ceramic microtubes. SiOC microtubes possessed a high bending strength, ranging from ∼30–1100 MPa.     

Identifying and understanding urban sport areas using Nokia Sports Tracker

Current advancements in pervasive technologies allow users to create and share an increasing amount of whereabouts data. Thus, some rich datasets on human mobility are becoming available on the web. In this paper we extracted approximately 790,000 mobility traces from a web-based repository of GPS tracks—the Nokia Sports Tracker Service. Using data mining mechanisms, we show that this data can be analyzed to uncover daily routines and interesting schemes in the use of public spaces. We first show that our approach supports large-scale analysis of people’s whereabouts by comparing behavioral patterns across cities. Then, using Kernel Density Estimation, we present a mechanism to identify popular sport areas in individual cities. This kind of analysis allows us to highlight human-centered geographies that can support a wide range of applications ranging from location-based services to urban planning.