Low-Cost CMOS Interface for Capacitive Sensors and Its Application in a Capacitive Angular Encoder

A low-cost CMOS integrated interface for capacitivesensors is presented. The interface is composed of two separatechips: a capacitance-controlled oscillator and a selector, whichresult in a structure that is able to measure several capacitancesaccurately and has a microcontroller-compatible output. In thisinterface, even large parasitic capacitances of up to 3 nF betweenthe terminals of the capacitor to be measured and ground areallowed. Prototypes of the interface chips have been fabricatedin a 0.7-µm CMOS process. The frequency of theoscillator amounts to 90 kHz. For the capacitance measurement,the interface has a resolution of 11.3 ppm and a nonlinearityof 300 ppm over a measurement range of 2 pF. In this paper, alsothe application of the interface in an accurate capacitive angularencoder is discussed.     

A Hierarchical Segmentation of Articulated Bodies

This paper presents a novel segmentation method to assist the rigging of articulated bodies. The method computes a coarse‐to‐fine hierarchy of segments ordered by the level of detail. The results are invariant to deformations, and numerically robust to noise, irregular tessellations, and topological short‐circuits. The segmentation is based on two key ideas. First, it exploits the multiscale properties of the diffusion distance on surfaces, and then it introduces a new definition of medial structures, composing a bijection between medial structures and segments. Our method computes this bijection through a simple and fast iterative approach, and applies it to triangulated meshes.     

Search for tsetse attractants: A structure-activity study on 1-octen-3-ol inGlossina fuscipes fuscipes (Diptera: Glossinidae)

Trapping tsetse flies belonging to thepalpalis group still relies totally upon luring by visual cues even though odor-baited trapping is used effectively against themorsitans-group species. Forty-three percent of the antennal olfactory cells ofGlossina f. fuscipes, a member of thepalpalis group, respond to 1-octen-3-ol. For this species we report a structure-activity relationship between 1-octen-3-ol analogs, in which carbon chain length and the configuration of the hydroxyl and -bond moieties are varied, and biological activity. Although the optimum chain length for all cells sensitive to 1-octen-3-ol is eight and most cells give lower responses when the hydroxyl function is omitted, there is a clear division into two groups. One group is diverse and represents cells that appear indifferent to the presence or position of the bond; many will respond to such disparate structures as acetone and 3-methylphenol as well as to 1-octen-3-ol. In the other group, the structural requirements for the stimulus are more stringent; the cells appear to be specifically tuned to 1-octen-3-ol. Their thresholds are three orders of magnitude lower than those of the former group. The existence of two clusters points to a functional division in the olfactory sense. We suggest that the latter low-threshold group is involved in host detection from a distance while the former diverse group is involved in host discrimination at close range. Trap harvests with 1-octen-3-ol as a bait may have been disappointing because the appropriate mixture for generating a landing response on the traps is still lacking.     

Discrete 2‐Tensor Fields on Triangulations

Geometry processing has made ample use of discrete representations of tangent vector fields and antisymmetric tensors (i.e., forms) on triangulations. Symmetric 2‐tensors, while crucial in the definition of inner products and elliptic operators, have received only limited attention. They are often discretized by first defining a coordinate system per vertex, edge or face, then storing their components in this frame field. In this paper, we introduce a representation of arbitrary 2‐tensor fields on triangle meshes. We leverage a coordinate‐free decomposition of continuous 2‐tensors in the plane to construct a finite‐dimensional encoding of tensor fields through scalar values on oriented simplices of a manifold triangulation. We also provide closed‐form expressions of pairing, inner product, and trace for this discrete representation of tensor fields, and formulate a discrete covariant derivative and a discrete Lie bracket. Our approach extends discrete/finite‐element exterior calculus, recovers familiar operators such as the weighted Laplacian operator, and defines discrete notions of divergence‐free, curl‐free, and traceless tensors–thus offering a numerical framework for discrete tensor calculus on triangulations. We finally demonstrate the robustness and accuracy of our operators on analytical examples, before applying them to the computation of anisotropic geodesic distances on discrete surfaces.     

Soybean whole-plant ensiled with chitosan and lactic acid bacteria: Microorganism counts,fermentative profile,and total losses

Chitosan is a biopolymer derived from chitin deacetylation, present in the exoskeleton of crustaceans and insects. Chitosan has been evaluated as rumen modulator and silage additive due to its antimicrobial properties. The objective of this study was to determine the effects of both chitosan and a bacterial additive on microbiological quality, chemical composition, nutrient in vitro degradation, fermentative profile, and total losses of whole-soybean plant silage (SS) harvested at R6 stage. Four treatments in a factorial arrangement were randomly assigned to 40 experimental minisilos as no additives (CON), 8 g/t fresh forage of microbial inoculant (INO; Kera SIL, Kera Nutrição Animal, Bento Gonçalves, Brazil); 5 g/kg of fresh forage chitosan (CHI); and CHI + INO. Microbial inoculant was composed of Lactobacillus plantarum (4.0 × 10¹⁰ cfu/g) and Propionibacterium acidipropionici (2.6 × 10¹⁰ cfu/g). The CHI and INO alone increased counts of lactic bacteria and anaerobic bacteria and decreased counts of mold and yeast in SS. The CHI or INO alone increased in vitro degradation of dry matter, crude protein, and neutral detergent fiber, and decreased nonfiber carbohydrate content of SS. Chitosan increased NH₃-N and lactate concentrations and decreased ethanol concentration in SS. The CHI increased dry matter recovery from SS; INO increased silage aerobic stability. The combination of CHI+INO showed the lowest value of gas losses. In general, the combination of CHI and INO had small positive effects on gas losses of SS; however, both CHI or INO alone improved nutrient in vitro degradation and decreased mold and yeast in SS. Chitosan or INO utilization improves SS quality.     

Physiology of ileal pouch-anal anastomosis. Current concepts

PURPOSE: Increasing experience with ileal pouch-anal anastomosis (IPAA) associated with increasing knowledge about anorectal physiology has lead to a large number of publications. The purpose of this review is to evaluate the current understanding of fecal continence as revealed by the evolution of the ileoanal procedure. METHODS: Review of the literature covering the most important physiologic parameters involved in fecal continence was undertaken. RESULTS: Rectoanal inhibitory reflex is probably absent after IPAA but is preserved when distal anorectal mucosa is spared. Anal resting pressure decreases but is less affected when the internal anal sphincter is less traumatized. Squeeze pressure is not importantly affected, and the importance of reservoir function as a determinant of stool frequency is emphasized. IPAA does not affect the coordination between pouch and anal canal motility in the majority of cases. Normal continence is preserved, even during the night, by preserving a gradient of pressure between the pouch and anal canal. CONCLUSIONS: Physiologic concepts are well established, but controversies about the continence mechanism related to IPAA remain. The IPAA procedure has allowed discrimination of details about the function of multiple structures involved in fecal continence.     

VSP – A gate stack analyzer

An efficient software tool for investigations on novel stacked gate dielectrics with emphasis on reliability has been developed. The accumulation, depletion, and inversion of carriers in MOS capacitors is properly considered for n- and p-substrates. The effect of carrier quantization on the electrostatics and the leakage current is included by treating carriers in quasi-bound states (QBS) and continuum states. The effect of interface traps and bulk traps in arbitrarily stacked gate dielectrics is taken into account. Trap assisted tunneling (TAT) is incorporated assuming an inelastic single step tunneling process. A brief overview of implemented models is given. The capabilities of our tool are demonstrated by several examples.     

Influence of loading types on the shear strength of the dentin–resin interface bonding

Small differences in the shear bond test can make critical differences in the bonding strength values. The purpose of this study was to compare the influence of the orthodontic-looped wire, stainless steel tape and chisel systems used in shear bonding tests to verify the resistance in the dentin-resin interface. Forty-eight human teeth were used and divided in three groups. The teeth were ground until a flat smooth surface was achieved, that was delimited with an adhesive tape containing a hole of 4 mm diameter. After, the dentine surface was treated with Scotchbond Multi Purpose and the composite Z-100 was applied in layers, through a stainless steel mold. The samples were stored at 37 °C and 100% of relative humidity for 24 h and, then, submitted to 500 thermal cycles. After, they were taken to an universal test machine (Otto Wolpert) with crosshead speed of 6 mm/min. The results were statistically analyzed using a Tukey's test (p<0.05). The orthodontic-looped wire determined the highest values of shear bond (13.33 MPa), following by chisel (7.81 MPa) and stainless steel tape (4.87 MPa). The debonding values depend on a complex stress combination produced during the loading of the samples. Small variations in test methodologies give statistically different values for shear bond strength. Different shear strength methods in vitro make the comparative clinical performance of the resin filling materials difficult.     

BG60S dissolution interferes with osteoblast calcium signals

We investigated the influence of extracellular calcium concentration, caused by the dissolution of a bioactive glass with 60% of silicon (BG60S), on intracellular calcium (Ca_i ^{2 +}) signals and expression of inositol 1, 4, 5-triphosphate receptors (InsP₃R) in primary culture of osteoblasts. We found that BG60S caused an increase in Ca_i ^{2 +} signals in this cell type. Additionally, osteoblasts pre-incubated in the presence of BG60S showed an increase in Ca_i ^{2 +} when cells were stimulated with vasopressin. On the other hand, a decrease in Ca_i ^{2 +} signals were observed in osteoblasts pre-treated with BG60S and stimulated with KCl. We furher found that in osteoblasts, the type I InsP₃R is preferentially distributed in the nucleus while the type II InsP₃R in the cytoplasm. Preincubation of osteoblasts with BG60S altered the receptor expression level, increasing the type I InsP₃R in the nucleus and decreasing type II InsP₃R in the cytosol. Together, our results showed that in osteoblasts, BG60S increased Ca_i ^{2 +}signals and altered Ca_i ^{2 +} machinery.     

Thermo-oxidative aging of acrylonitrile-butadiene rubber gaskets with real geometry used in plate heat exchangers

This study investigates the effects of aging on the physical and mechanical properties of commercially available acrylonitrile-butadiene rubber (NBR) gaskets while maintaining their original geometry. Thermo-oxidative cycles with 10 and 70 mm in length specimens were conducted from 80 to 170°C up to 180 days. The samples were analyzed employing compression set (CS), hardness, indentation modulus, cross-link density, total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), and thermogravimetry. The results showed that longer specimens presented better resistance to thermo-oxidative aging. Indentation results indicated regular oxygen permeability into the entire samples up to 110°C, while at higher temperatures, limited diffusion oxidation (DLO) effects promoted non-uniform aging. Time–temperature superposition (TTS) and Arrhenius methods were applied to predict the specimens' lifetime using CS as a failure criterion. Activation energies for 10 and 70 mm samples were 68.74 and 43.63 kJ mol⁻¹, respectively. Thus, the 70 mm specimen's lifetime was greater than 10 mm. For temperatures below ≈38°C, the response to the thermo-oxidative aging is independent of specimen length. Therefore, in determining the lifetime of gaskets with complex geometry, longer specimens are recommended to provide more reliable results than those suggested by the standards.