Methane calibration burner and C‐factor determination with cone calorimeter – validation of the standardized calibration protocol

The cone calorimeter is one of the major fire tests. In its reference standard ISO 5660‐1, the apparatus (and especially a characteristic of its orifice plate mass flow meter, called C‐Factor) is calibrated using a methane burner set at 5 kW. However, measurements performed in end‐use are in the range 1–10 kW. In addition, standard proposes to check linearity at 1 and 3 kW, which means in the lowest part of the range. This communication establishes the validation of the linearity on the whole range and determines the optimal condition for C‐factor determination. It justifies the technical choices of the standard. Copyright © 2014 John Wiley & Sons, Ltd.     

Freshness characterisation of whiting (Merlangius merlangus) using an SPME/GC/MS method and a statistical multivariate approach

BACKGROUND: The freshness of whiting was studied at five stages of ice storage by comparing the analysis of volatile compounds obtained through solid phase microextraction/gas chromatography/mass spectrometry (SPME/GC/MS) with two sensory methods. RESULTS: Of the volatile compounds identified, 38 were analysed using a statistical multivariate approach and classified according to their role in the estimation of freshness during storage as markers of freshness or spoilage. Regarding the evolution of the presence or absence of individual compounds, three categories were defined. For example, the volatile compounds propanal, hexanal, 1‐penten‐3‐ol, pentanal, 2,3‐pentanedione, 1‐penten‐3‐one, heptanal, (E)‐2‐pentenal, 2,3‐octanedione, (Z)‐2‐penten‐1‐ol, 1‐pentanol, butanal, octanal, 3,5,5‐trimethyl‐2‐hexene, 1‐hexanol and 4,4‐dimethyl‐1,3‐dioxane appeared highly relevant, because they are found throughout storage and can be divided into several categories that are directly related to the quality of fish. CONCLUSION: SPME/GC/MS combined with a statistical multivariate approach may be a useful method to identify volatile compounds and characterise fish freshness during storage. Copyright © 2010 Society of Chemical Industry     

Effects of the nature of the doping salt and of the thermal pre-treatment and sintering temperature on Spark Plasma Sintering of transparent alumina

A slurry of α-Al₂O₃ was doped with Mg, Zr and La nitrates or chlorides, in various amounts in the range 150-500 wt ppm and then freeze-dried to produce nanosized doped powder (∼150 nm). The powder was sintered by SPS to yield transparent polycrystalline alpha alumina. The influence of the nature of the doping element and the starting salt, the thermal treatment before sintering and the sintering temperature on the transparency of the ceramics were investigated. The transparency of the ceramics of nanosized Al₂O₃ was shown to depend mainly on the way the powder was prepared, the nature of the doping salt also had an effect. Finally, a high real inline transmittance, reaching 48.1% was achieved after optimization.     

Growth and characterization of gold catalyzed SiGe nanowires and alternative metal-catalyzed Si nanowires

The growth of semiconductor (SC) nanowires (NW) by CVD using Au-catalyzed VLS process has been widely studied over the past few years. Among others SC, it is possible to grow pure Si or SiGe NW thanks to these techniques. Nevertheless, Au could deteriorate the electric properties of SC and the use of other metal catalysts will be mandatory if NW are to be designed for innovating electronic. First, this article's focus will be on SiGe NW's growth using Au catalyst. The authors managed to grow SiGe NW between 350 and 400°C. Ge concentration (x) in Si1-xGex NW has been successfully varied by modifying the gas flow ratio: R = GeH4/(SiH4 + GeH4). Characterization (by Raman spectroscopy and XRD) revealed concentrations varying from 0.2 to 0.46 on NW grown at 375°C, with R varying from 0.05 to 0.15. Second, the results of Si NW growths by CVD using alternatives catalysts such as platinum-, palladium- and nickel-silicides are presented. This study, carried out on a LPCVD furnace, aimed at defining Si NW growth conditions when using such catalysts. Since the growth temperatures investigated are lower than the eutectic temperatures of these Si-metal alloys, VSS growth is expected and observed. Different temperatures and HCl flow rates have been tested with the aim of minimizing 2D growth which induces an important tapering of the NW. Finally, mechanical characterization of single NW has been carried out using an AFM method developed at the LTM. It consists in measuring the deflection of an AFM tip while performing approach-retract curves at various positions along the length of a cantilevered NW. This approach allows the measurement of as-grown single NW's Young modulus and spring constant, and alleviates uncertainties inherent in single point measurement.     

Recycling zinc oxide varistor blocks for electro‐active silicone composites

The recycling process toward the elimination of varistor wastes into new electro‐active silicon composites has been investigated. We studied the dependence of the E‐J characteristics on the aggregate content in the polymer matrix. Formulations with 40 vol.% metal oxide varistor aggregates in the 100‐200 μm range exhibit reliable nonlinear behavior with a switching voltage of 280±30 V/mm. The breakdown voltage of the composite decreases as both filler's diameter and filler's volume fraction increases in the 550‐220 V/mm and 440‐280 V/mm range, respectively. This paves the way for the valorization of varistors based zinc oxide (ZnO) ceramics.     

Geopolymer assembly by emulsion templating: Emulsion stability and hardening mechanisms

This work investigates emulsion templating to synthesize hexadecane oil/geopolymer composites. In a system with hexadecane as the internal (dispersed) phase and an alkali activated continuous phase without added surfactant, adding aluminosilicate clay particles does not increase resistance against creaming or coalescence, while adding a surfactant (L35 or CTAB) stabilizes the solid-liquid interface. Infrared studies and rheological studies of the associated geopolymerization determined that the presence of the organic phase or surfactant has no significant effect on the geopolymerization kinetics, as determined by the change in time of the Si-O-T IR stretching frequency and the rheological moduli involved during the process. The stabilization of the organic template is reminiscent of Pickering emulsion even though we employ a much greater amount of inorganic material for geopolymer formation. Although the addition of surfactant has a significant effect on the behavior of the paste, the percolation of the network remains unmodified, highlighting the fact that the phenomenon is not dependent on viscosity. Finally, rheological measurements were used to obtain the mass fractal dimension of the as-made gel network, which is able to differentiate the interfacial effect between surfactant molecules with a slightly denser interphase when a cationic surfactant is used.     

Synthesis and characterization of the polyols by air oxidation of soybean oil and its effect on the morphology and dynamic mechanical properties of poly(vinyl chloride) blends

The use of natural additives, with low toxicity and good compatibility, for PVC is becoming increasingly attractive. In this study, soybean oil additives were prepared by air oxidation reactions and blending with PVC. The oxidation reaction produced a significant increase in the number of hydroxyl groups in soybean oil; however, this kind of reaction results in the formation of a heterogeneous structure due to free radical reactions in the medium. The oxidized soybean oil improved the compatibility with PVC due to an increase in the number of polar groups, such as hydroxyls, and thus a reduction in the amount of atactic polymer was observed. Furthermore, an increase in the molecular weight of the oxidized oil, as well as large amounts of polar groups contributes to reducing the migration of oil in the PVC. Regarding the crystallinity of PVC, the use of pure and oxidized soybean oil causes small changes in the crystalline phase of the polymer. Oxidized soybean oil has great potential for usage as a secondary plasticizer for PVC. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42102.     

Borago officinalis oil: Fatty acid fractionation by immobilized Candida rugosa lipase

γ-Linolenic acid (Z,Z,Z-6,9,12-octadecatrienoic acid), a very important polyunsaturated fatty acid is found in the free fatty acid fraction prepared by the hydrolysis of borage oil. Our aim was to enrich this fraction in γ-linolenic acid using selective esterification. Candida rugosa lipase was used as catalyst after immobilization on the following ion-exchange resins: Amberlite IRC50, IRA35, IRA93, and Duolite A7, A368, A568. In every case, immobilization modified the lipae’s specificity: palmitic, stearic, oleic, and linoleic acids were preferentially esterified compared to γ-linolenic acid, thus allowing a γ-linolenic acid enrichment of 3.0.     

Operational transfer path analysis

One of the tools used to study the NVH behaviour of a system is the transfer path analysis. It aims to identify the operational forces and the propagation paths of the vibrations and is especially interesting in the case when the system is composed of different subsystems. The classical techniques identify the transfer paths when the system is disassembled. This way one eliminates flanking transfer paths. Yet it is very time-consuming and the boundary conditions are not correct anymore. The presented method makes it possible to identify the transfer paths without disassembling the system. The advantages are that the overall testing time is reduced and that the real boundary conditions are present. In this article the theory will be reviewed and it will be validated using data generated by finite element simulations.     

Wheat gluten-coated papers for bio-based food packaging: Structure,surface and transfer properties

The objective of the present work was to understand how the structural, surface, water vapour and gas barrier properties of wheat gluten (WG) coated paper could be influenced by the features of paper. For this purpose, a surface treated paper (TP) and an untreated paper (UTP) were compared. Penetration of WG-coating into the bulk of paper was more pronounced in UTP than TP. This led to the formation of a significant junction zone resulting in an interpenetrated structure for WG–UTP, suggesting a composite-like structure, while a bi-layer one was obtained for WG–TP. Differences in WG penetration were related to the hydrophilicity, roughness and porosity of the paper used. Even though the extent of penetration did not greatly affect the surface properties (water and oil resistance), the transfer properties (water vapour, O₂ and CO₂) of WG-coated papers were significantly improved when WG-coating highly penetrated: while the WG–TP behaved as a micro-perforated material, the WG–UTP behaved as WG-film.