Electrical conductivity as a function of temperature in amorphous lithium tungsten oxide

Tungsten oxide is a widely used electrochromic material for smart windows. In order to study the charge carriers involved in the electrochromic process, it is important to characterize the electrical transport in tungsten oxide. Substoichiometric amorphous tungsten oxide films were prepared by DC-magnetron sputtering. The films were electrochemically intercalated with lithium. The Li/W intercalation ratios for the tungsten oxide films were in the range 0.15–0.53. Temperature dependent resistivity measurements were performed in the temperature range 77–300 K for samples at different lithium intercalation levels. It was found that the data are consistent with the variable range hopping model.     

Exergy analysis of chemical-looping combustion systems

A power plant based on chemical-looping combustion offers both a possibility of high net power efficiency and separation of the greenhouse gas CO₂. This is due to the way the oxidation of the fuel takes place. Instead of oxidizing the fuel with oxygen from the combustion air, the fuel is oxidized by an oxygen carrier, i.e., an oxygen-containing compound. The oxygen carriers that have been suggested in previous studies are metal oxides like NiO, Fe₂O₃ and Mn₃O₄. The reduced oxygen carrier is in the next step reoxidized by air in a second reactor and then recirculated to the first reactor. In this way, fuel and air are never mixed and the fuel oxidation products CO₂ and water leave the system undiluted by air. All that is needed to get an almost pure CO₂ product is to condense the water vapour and remove the liquid water.Chemical-looping combustion (CLC) is also claimed to reduce the fuel exergy destruction in the overall reaction of combustion of the fuel. This gives a possibility to increase the net power efficiency.This paper gives an introduction to chemical-looping combustion. Results from simulations and a detailed exergy analysis of two different CLC gas turbine (GT) systems are also presented. The first system utilizes methane as a fuel and NiO as oxygen carrier. The second system utilizes a fuel gas mixture consisting mainly of CO and H₂, simulating a fuel gas from for instance coal gasification. Results for this system are given for simulations with both NiO and Fe₂O₃ as oxygen carrier. The two systems are compared to comparable simulated systems with conventional combustion of the same fuel. The exergy analysis shows that the irreversibilities generated upon combustion of the fuel are reduced. The net power efficiency of the CLC–GT systems is similar or higher than for the corresponding GT systems with conventional combustion. The net power efficiency of CLC systems could be even further increased if the exergy remaining in the exhaust could be utilized in an efficient way.     

Between Elderly Parents and Grandchildren—Geographic Proximity and Trends in Four-Generation Families

In an ageing society, families may have an important role in the caretaking and well-being of the elderly. Demographic changes have an impact on the size and structure of families; one aspect is how intergenerational support is distributed when there is a need for support to both older and younger generations at the same time. Another vital aspect of the provision of care for the elderly is geographic proximity. This study is oriented towards the potential “both-end carers” i.e. persons who have grandchildren in potential need of care while still having living ageing parents. The incidence of having grandchildren and having living parents at age 55 and the proximity between generations is described using Swedish register data. The results show that the share of 55-year-olds who are grandparents decreased dramatically from 70% to 35% between 1990 and 2005. As expected, more 55-year-olds have living parents—a proportion that increased from 37% to 47% during this period. As a result of delayed childbearing among the children of these cohorts, the likelihood of belonging to a four-generation family among 55-year-olds has not increased, despite increased longevity. Furthermore, most individuals live within daily reach of their kin and no evidence was found of a trend of increasing geographic distances between generations.     

Software Assumptions Lead to Preventable Errors

Undocumented assumptions are often the cause of serious software system failure. Thus, to reduce such failures, developers must become better at discovering and documenting their assumptions. In this article, we focus on common categories of assumptions in software, discuss methods for recognizing when developers are making them, and recommend techniques for documenting them.     

Anaerobic fermentation of xylose by pichia stipitis: The effect of forced cycling of ph

Xylose fermentation by Pichia stipitis was examined using a two-stage batch process. The cells were first grown aerobically on D-xylose (5 g/L), whereafter additional xylose (10 g/L) was added and fermented during anaerobic conditions (T=30°C). The optimum pH value for a fermentation with constant pH was found to be 4.5 (maximum specific ethanol production rate 0.21 g/(g h). Forced square wave cycling of the pH between 4 and 5, and 3.5 and 5.5 (cycle time 30 min) during the fermentation stage resulted in a fermentation rate lower than the maximum rate, but with unchanged ethanol yields.     

A demonstration of level-anchored ratio scaling for prediction of grip strength

Level-anchored ratio scaling, such as the Borg CR10 scale^® and the Borg CR100 scale^®, uses verbal anchors in congruence with numbers to give ratio data together with natural levels of intensity. This presupposes that the anchors possess natural positions in the subjective dynamic range and also “numerical” inter-relations. In an experiment, subjects had to produce a force of handgrip corresponding to their conception of “Strong”, followed by a “Maximal” performance. By using the previously found relationship between “Strong” and “Maximal” of 1:2 together with knowledge of the exponent in the power S-R-function (R = c × Sⁿ) for grip strength, n = 1.8, predictions of individual maximal performances were obtained. The predicted values correlated 0.76 with, and deviated only 3% (ns) from, actual maximal performances of grip strength. This result –as previously also found for aerobic capacity–gives a strong support for the use of verbal anchors, so common in category scaling, also in “ratio scaling” and that the Borg CR-scales fulfill the requirements for ratio scales. For estimation of muscular strength, such as grip strength, this present study points to the value of using submaximal determinations as a compliment to maximal performances (e.g., to obtain measures of functional capacity). The results also support the increasingly common use of the CR-methodology in other ergonomic settings concerning suitable design of tools and equipment.     

Verification of cardiac tissue electrophysiology simulators using an N-version benchmark

Ongoing developments in cardiac modelling have resulted, in particular, in the development of advanced and increasingly complex computational frameworks for simulating cardiac tissue electrophysiology. The goal of these simulations is often to represent the detailed physiology and pathologies of the heart using codes that exploit the computational potential of high-performance computing architectures. These developments have rapidly progressed the simulation capacity of cardiac virtual physiological human style models; however, they have also made it increasingly challenging to verify that a given code provides a faithful representation of the purported governing equations and corresponding solution techniques. This study provides the first cardiac tissue electrophysiology simulation benchmark to allow these codes to be verified. The benchmark was successfully evaluated on 11 simulation platforms to generate a consensus gold-standard converged solution. The benchmark definition in combination with the gold-standard solution can now be used to verify new simulation codes and numerical methods in the future.