Differential induction of metallothionein synthesis by interleukin-6 and tumor necrosis factor-alpha in rat tissues

Metallothionein (MT) synthesis induced by the inflammatory cytokines, interleukin-6 (IL-6) and tumor necrosis factor-alpha (TNF), was studied in vivo. Administration of recombinant human IL-6 or TNF to rats caused the acute phase responses including rapid decreases in plasma zinc (Zn), and increases in plasma copper (Cu) and ceruloplasmin. Hepatic concentration of MT-I, one of MT isoforms, began to increase within 3 h after the injection of IL-6 or TNF. In IL-6-treated rats, MT-I concentration in liver reached a maximum level at 12 h and decreased with a transient rebound, whereas, in TNF-treated rats, a high level of MT-I lasted for about 48 h. MT-II, the other MT isoform, was induced more than MT-I in liver by both cytokines. MT-I was also induced in lung and heart by TNF, but little by IL-6. The data suggest that IL-6 may be responsible for MT synthesis in liver, whereas TNF may be responsible not only in liver but also in lung and heart. Furthermore plasma concentration of MT did not always reflect the enhanced concentration of MT by TNF and IL-6 in liver, suggesting involvement of many factors influencing plasma MT levels. The interrelation between IL-6 and TNF for MT synthesis has also been discussed.     

A measurement-theoretic analysis of the fuzzy logic model of perception.

The fuzzy logic model of perception (FLMP) is analyzed from a measurement-theoretic perspective. FLMP has an impressive history of fitting factorial data, suggesting that its probabilistic form is valid. The authors raise questions about the underlying processing assumptions of FLMP. Although FLMP parameters are interpreted as fuzzy logic truth values, the authors demonstrate that for several factorial designs widely used in choice experiments, most desirable fuzzy truth value properties fail to hold under permissible rescalings, suggesting that the fuzzy logic interpretation may be unwarranted. The authors show that FLMP's choice rule is equivalent to a version of G. Rasch's (1960) item response theory model, and the nature of FLMP measurement scales is transparent when stated in this form. Statistical inference theory exists for the Rasch model and its equivalent forms. In fact, FLMP can be reparameterized as a simple 2-category logit model, thereby facilitating interpretation of its measurement scales and allowing access to commercially available software for performing statistical inference. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Decision by the Principle Board of the Polish Allergy Society

A review of isolates of Neisseria meningitidis and other laboratory evidence of meningococcal infection was carried out for the period 1990-1995. Thirty-three patients with evidence of meningococcal disease were identified over the six year period. Group B organisms were the most commonly identified, but an increase in Group C has occurred and is almost equal in number. Data from clinical, laboratory and public health sources should be centralized in a National Surveillance Centre.     

Patient characteristics, MRI examination, and dopaminergic drug response in clinical possible Parkinson''s disease

As hypersensitivity to natural rubber latex (NRL) has become an increasingly recognized problem in children, identification of all groups at risk seems important. In this study hypersensitivity to NRL was evaluated in 337 children with potential risk factors. We identified by questionnaire children's underlying diseases, history of surgical procedures, evidence of atopy and patient's history of NRL-specific reactions. Hypersensitivity to NRL and other allergens relevant in the Düsseldorf area was evaluated by skin prick test and specific IgE. In 9.2% of all children hypersensitivity to NRL was observed. Significant risk factors for hypersensitivity to NRL were, among the underlying diseases, spina bifida (odds ratio 29.2), hydrocephalus internus (10.1), gastrointestinal malformation (5.2) and atopy (2.2). Surgical procedures with significant risk were the implantation of a ventriculo-peritoneal shunt (15.7) and surgery of the gastrointestinal tract (3.1). Frequency of surgical procedures correlated (p < 0.001) with risk of hypersensitivity. Frequent surgery and atopy were found to have an additional effect on the risk of hypersensitivity. Information about previous NRL-specific reactions obtained by questionnaire was of little predictive value when performing multivariate analysis. For children at high risk for hypersensitivity to NRL preoperative evaluation and, in case of hypersensitivity, preventive measures seem to be advised.     

Scanning Acoustic Microscopy of SCS-6 Silicon Carbide Fiber

Scanning acoustic microscopy of SCS-6 silicon carbide fiber reveals large radial variations in acoustic reflectivity associated with the chemical composition and microstructure of a given fiber region. Rayleigh wave fringe patterns observed in each of five subregions are used to calculate the average Young modulus of that subregion. The Young modulus is found to increase monotonically from 40 GPa in the carbon core to a value of 413 GPa in the stoichiometric SiC region. The effective Young modulus of the fiber as a whole is estimated from the moduli of the individual regions and it is compared with mechanical measurements reported in the literature.     

Assay of oral vaccination of dogs against rabies in Tunisia with the vaccinal strain SADBern

The possibility of immunizing dogs orally against rabies, using SADBern, an attenuated strain, was tested on dogs in the field in Tunisia. This strain induced high neutralizing antibody titres and conferred to all vaccinated dogs total resistance against a challenge with a Maghrebian strain. However, an excretion of virus of vaccinal origin was observed in one dog, hampering the use of SADBern in dogs. Nevertheless, this work demonstrates for the first time that dogs in developing countries, especially those which are inaccessible to parenteral vaccination, could be efficiently immunized against rabies by the oral route.     

A 3.3-mW /spl Sigma//spl Delta/ modulator for UMTS in 0.18-/spl mu/m CMOS with 70-dB dynamic range in 2-MHz bandwidth

A quadrature fourth-order, continuous-time, /spl Sigma//spl Delta/ modulator with 1.5-b quantizer and feedback digital-to-analog converter (DAC) for a universal mobile telecommunication system (UMTS) receiver chain is presented. It achieves a dynamic range of 70 dB in a 2-MHz bandwidth and the total harmonic distortion is -74 dB at full-scale input. When used in an integrated receiver for UMTS, the dynamic range of the modulator substantially reduces the need for analog automatic gain control and its tolerance of large out-of-band interference also permits the use of only first-order prefiltering. An IC including an I and Q /spl Sigma//spl Delta/ modulator, phase-locked loop, oscillator, and bandgap dissipates 11.5 mW at 1.8 V. The active area is 0.41 mm/sup 2/ in a 0.18-/spl mu/m 1-poly 5-metal CMOS technology.     

An easy-to-use mismatch model for the MOS transistor

In this paper, a physics-based mismatch model is presented. It is demonstrated on a 0.18-/spl mu/m technology that a simple mismatch model can still be used to characterize deep-submicron technologies. The accuracy of the model is examined and found to be within 20% in the strong inversion region. Bulk bias dependence is modeled in a physical way. To extract the mismatch parameters, a weighted fit is introduced. It is shown that the width and length dependence of the mismatch parameters is given by the Pelgrom model.     

Fabrication of 1.55 μm VCSELs on Si using metallic bonding

Using AuGeNiCr multilayered metals as the wafer bonding medium, long-wavelength GaInAsP/InP vertical cavity surface emitting lasers employing Al-oxide/Si as the upper and lower distributed Bragg reflectors were fabricated on Si substrate with the bonding interface formed outside the vertical cavity surface emitting laser cavity. Laser emission at 1.545 μm was measured under pulsed operations near room temperature. The low-temperature metallic bonding process demonstrates a great potential in device fabrication