Single, Depolarized, CW Supercontinuum-Based Wavelength-Division-Multiplexed Passive Optical Network Architecture With C-Band OLT, L-Band ONU, and U-Band Monitoring

We propose and experimentally demonstrate a novel bidirectional wavelength-division-multiplexed passive optical network architecture that fully utilizes the superior optical properties of an incoherent continuous-wave (CW) supercontinuum (SC) source. The proposed architecture, which incorporates low-cost Fabry-Perot laser diodes that have been wavelength locked by spectrum-sliced beams from a depolarized 130-nm-bandwidth CW SC source, is based on a unique wavelength band allocation scheme of the C-band for an optical line terminal (OLT), the L-band for optical network units (ONUs), and the U-band for channel monitoring. A cost-effective network that features a single broadband source at the OLT, and no additional wavelength- band-selective monitoring beam reflector at each ONU can be readily achieved. The experimental demonstration presented in this paper is carried out at a data rate of 622 Mb/s over a 25-km standard single-mode fiber.     

Experimental Demonstration of 1.25-Gb/s Radio-Over-Fiber Downlink Using SBS-Based Photonic Upconversion

We experimentally demonstrate a radio-over-fiber downlink system using a stimulated Brillouin scattering (SBS)-based photonic upconversion technique. The Brillouin selective amplification characteristic of SBS is incorporated to generate the 11-GHz band radio-frequency (RF) carrier. The dual-electrode Mach-Zehnder optical modulator, which is used to carry the broadband data in the optical carrier instead of the optical sideband, is adopted along with the SBS-based carrier generation setup. To vindicate the broadband capabilities of the proposed scheme, 1.25-Gb/s pseudorandom bit sequence data is carried in the optical carrier. Error-free operation of the 1.25-Gb/s downlink is achieved without critical power penalties after the 13-km fiber transmission.     

On Capacity and Fairness of Quality-Based Channel-State Reporting with Different Thresholds in Non-Identical Rayleigh Fading Channels

The quality-based channel-state reporting (QBR) that prevents the users with signal strength below a threshold from sending feedback induces a fairness problem in non-identically distributed fading channels. This letter extends QBR so as to achieve a fair throughput among users to whom different values of the threshold are assigned. With numerical investigation, the proposed extension is shown to achieve both multiuser diversity and a near absolute fairness where all the users have the same individual throughput.     

Suppressing Ion Migration across Perovskite Grain Boundaries by Polymer Additives

Passivation of organometal halide perovskites with polar molecules has been recently demonstrated to improve the photovoltaic device efficiency and stability. However, the mechanism is still elusive. Here, it is found that both polymers with large and small dipole moment of 3.7 D and 0.6 D have negligible defect passivation effect on the MAPbI₃ perovskite films as evidenced by photothermal deflection spectroscopy. The photovoltaic devices with and without the polymer additives also have comparable power conversion efficiencies around 19%. However, devices with the additives have noticeable improvement in stability under continuous light irradiation. It is found that although the initial mobile ion concentrations are comparable in both devices with and without the additives, the additives can strongly suppress the ion migration during the device operation. This contributes to the significantly enhanced electrical-field stress tolerance of the perovskite solar cells (PVSCs). The PVSCs with polymer additives can operate up to −2 V reverse voltage bias which is much larger than the breakdown voltage of −0.5 V that has been commonly observed. This study provides insight into the role of additives in perovskites and the corresponding device degradation mechanism.     

High Performance β-Ga2O3 Schottky Barrier Transistors with Large Work Function TMD Gate of NbS2 and TaS2

Gallium trioxide, β-Ga₂O₃, has been recently studied due to its promising semiconducting properties as active material in transistors or Schottky diodes. Transistors with β-Ga₂O₃ channels are mostly metal oxide field effect transistors (MOSFET), and they show very negative threshold voltages (V_th) in general. Metal semiconductor field effect transistors (MESFETs) with top gate are also reported with less negative V_th. Still, β-Ga₂O₃ MESFETs are only a few. Here, bottom gate architecture β-Ga₂O₃ MESFETs using transition metal dichalcogenide (TMD) NbS₂ and TaS₂ are reported. Due to the large work functions of those metallic TMDs, the MESFETs display minimum subthreshold swing of 61 mV dec⁻¹, small V_th of −1.2 V, minimum OFF I_D of ≈100 fA, and maximum ON/OFF current ratio of ≈10⁸. Both β-Ga₂O₃ Schottky diodes with TaS₂ and NbS₂ display good junction stability even after 300 °C measurements in 10 mTorr vacuum. When the β-Ga₂O₃ MESFET with TaS₂ gate is integrated as a switching FET into an organic light emitting diode (OLED) circuit, it demonstrates long-term leakage endurance performance, maintaining an OLED brightness higher than 58% of the initial intensity after 100 s passes since the ON-switching point, which is even superior to the performance of conventional a-IGZO MOSFET switch.     

Metallic Nanowire Coupled CsPbBr3 Quantum Dots Plasmonic Nanolaser

Plasmonic nanolasers provide a valuable opportunity for expanding sub-wavelength applications. Due to the potential of on-chip integration, semiconductor nanowire (NW)-based plasmonic nanolasers that support the waveguide mode attract a high level of interest. To date, perovskite quantum dots (QDs) based plasmonic lasers, especially nanolasers that support plasmonic-waveguide mode, are still a challenge and remain unexplored. Here, metallic NW coupled CsPbBr₃ QDs plasmonic-waveguide lasers are reported. By embedding Ag NWs in QDs film, an evolution from amplified spontaneous emission with a full width at half maximum (FWHM) of 6.6 nm to localized surface plasmon resonance (LSPR) supported random lasing is observed. When the pump light is focused on a single Ag NW, a QD-NW coupled plasmonic-waveguide laser with a much narrower emission peak (FWHM = 0.4 nm) is realized on a single Ag NW with the uniform polyvinylpyrrolidone layer. The QDs serve as the gain medium while the Ag NW serves as a resonant cavity and propagating plasmonic lasing modes. Furthermore, by pumping two Ag NWs with different directions, a dual-wavelength lasing switch is realized. The demonstration of metallic NW coupled QDs plasmonic nanolaser would provide an alternative approach for ultrasmall light sources as well as fundamental studies of light matter interactions.     

Near-Field Drives Long-Lived Shallow Trapping of Polymeric C3N4 for Efficient Photocatalytic Hydrogen Evolution

Undesired photoelectronic dormancy through active species decay is adverse to photoactivity enhancement. An insufficient extrinsic driving force leads to ultrafast deep charge trapping and photoactive species depopulation in carbon nitride (g-C₃N₄). Excitation of shallow trapping in g-C₃N₄ with long-lived excited states opens up the possibility of pursuing high-efficiency photocatalysis. Herein, a near-field-assisted model is constructed consisting of an In₂O₃-cube/g-C₃N₄ heterojunction associated with ultrafast photodynamic coupling. This In₂O₃-cube-induced near-field assistance system provides catalytic “hot areas”, efficiently enhances the lifetimes of excited states and shallow trapping in g-C₃N₄ and this favors an increased active species density. Optical simulations combined with time-resolved transient absorption spectroscopy shows there is a built-in charge transfer and the active species lifetimes are longer in the In₂O₃-cube/g-C₃N₄ hybrid. Besides these properties, the estimated overpotential and interfacial kinetics of the In₂O₃-cube/g-C₃N₄ hybrid co-promotes the liquid phase reaction and also helps in boosting the photocatalytic performance. The photocatalytic results exhibit a tremendous improvement (34-fold) for visible-light-driven hydrogen production. Near-field-assisted long-lived active species and the influences of trap states is a novel finding for enhancing (g-C₃N₄)-based photocatalytic performance.     

No-reference quality assessment of dynamic sports videos based on a spatiotemporal motion model

This paper proposes an approach to improve the performance of no-reference video quality assessment for sports videos with dynamic motion scenes using an efficient spatiotemporal model. In the proposed method, we divide the video sequences into video blocks and apply a 3D shearlet transform that can efficiently extract primary spatiotemporal features to capture dynamic natural motion scene statistics from the incoming video blocks. The concatenation of a deep residual bidirectional gated recurrent neural network and logistic regression is used to learn the spatiotemporal correlation more robustly and predict the perceptual quality score. In addition, conditional video block-wise constraints are incorporated into the objective function to improve quality estimation performance for the entire video. The experimental results show that the proposed method extracts spatiotemporal motion information more effectively and predicts the video quality with higher accuracy than the conventional no-reference video quality assessment methods.     

On detecting the presence of fetal R-wave using the moving averagedmagnitude difference algorithm

An efficient algorithm detecting the presence of a fetal QRS complex is presented. The proposed fetal QRS detection method computes the averaged magnitude of the difference between the fetal ECG signal and the reference signal to detect the fetal QRS event. The detected fetal QRS complexes are exponentially averaged to generate the template signal which can track the slowly varying shape of the fetal ECG signal. As an effort to obtain improved detection performances, two approaches of normalizing the fetal ECG signal and the template are considered.     

Body conformable 915 MHz microstrip array applicators for largesurface area hyperthermia

The optimal treatment with hyperthermia of superficially located tumors which involve large surface areas requires applicators which can physically conform to body contours, and locally alter their power deposition patterns to adjust for nonuniform temperature caused by tissue inhomogeneities and blood flow variations. A series of 915 MHz microstrip array applicators satisfying these criteria have been developed and clinically tested. Clinical and engineering design tradeoffs for practical devices are discussed. Measurements taken in tissue equivalent phantoms and a summary of our clinical experiences with these microstrip arrays are presented.