The Case of The Case Study in City Planning and Municipal Management

Abstract

PLAN FOR REZONING THE CITY OF NEW YORK. A Report by Harrison, Ballard &; Allen. City Planning Commission. New York. 1950. 290 pp. maps, illustrations. $2.00.

CONTROLLED ACCESS EXPRESSWAYS IN URBAN AREAS—A symposium. Highway Research Board Bulletin No. 25. Washington, D. C., 1950. 45 pages, illustrated. 60 cents.

SOCIAL PRESSURES IN INFORMAL GROUPS. By Leon Festinger, Stanley Schachter and Kurt Back. Harper Bros., New York, 1950. x-930 pp. $3.00.

PRODUCTION OF NEW HOUSING. A Research Monograph on Efficiency in Production. By Leo Grebler. Social Science Research Council. New York 1950. ix+ 186 pp. $1.75.     

Non-linear analysis of membrane action effect in profiled steel sheeting dry board flooring system

This study highlights the effect of membrane action in improving load carrying capacity of Profiled Steel Sheeting Dry Board (PSSDB) floor system. PSSDB system is a lightweight composite structural system composed of profiled steel sheeting and dry board, attached together by self-drilling and self-tapping screws. Many literatures have reported that restricting conventional slabs, such as reinforced concrete slab, at the supports against translation and/or rotation while it is subjected to vertical loading develops the compressive membrane action in the slab. The development of this phenomenon is considered in the PSSDB system with concrete infill for continuous and practical spans, with and without topping concrete. Previous authors’ experimentally verified non-linear finite element model for the PSSDB floor without topping was extended to parametrically predict the effect of different boundary conditions on the performance of the system for practical applications. It was revealed that preventing the in-plane movement of the slab ends improves the flexural rigidities of the slab up to more than three times when considering central deflection of serviceability limit state. This was observed when the deflection limit load of the fixed both end supports model was compared to the pin-roller support model. Moreover, the topping concrete enhances the applicability of the system in longer span and the developed compressive membrane action dramatically boosts the load carrying capacity of the slab with restricted translation and/or rotation of the slab ends.     

Effects of copper, pH and hardness on the critical swimming performance of rainbow trout (Salmo gairdneri Richardson)

Critical swimming velocities of Salmo gairdneri at 12°C were determined in different combinations of copper; pH and hardness. Measurements were made after exposure for 0.5, 5, 10, and 30 days. When copper was not applied, hardness, pH and exposure time had no appreciable effect on critical performance. Copper had the greatest effect on swimming performance at 5 days of exposure. At pH 7.5–8.0, recovery from the initial depression was complete after 10 days of exposure, but critical swimming performance did not return to control levels in pH 6.0 treatments. For any given hardness, copper had a greater effect on critical speed at low than at high pH. A given copper treatment had a more pronounced effect at low than at high hardness.No distinction could be made among total, soluble, or extractable copper but predicted concentrations of 6 specific cupric ions varied with pH and hardness. Of these copper species, only Cu²⁺ and CuOH⁺ were found to be related significantly to critical performance.Oxygen consumption of trout was determined in different combinations of copper and pH. In the presence of copper the maximum oxygen consumption decreased and the energy expenditure for a given swimming speed increased.The above observations are discussed in relation to reported toxic actions of copper.     

Mechanical and Tribological Properties of Ca/P-Doped Titanium Dioxide Layer Produced by Plasma Electrolytic Oxidation: Effects of Applied Voltage and Heat Treatment

Plasma electrolytic oxidation (PEO) is a technique that produces a hard oxide layer on the titanium surface where its properties can be tailored by changing the process parameters or by a posterior heat treatment (HT). In this work, a TiO₂ layer with different crystallinity was produced by PEO with different applied voltages (250 to 400 V) and post-HT at 600°C. Our aim was to evaluate the influence of the PEO voltage and HT on the mechanical and tribological properties of anodized Ti. There is an increase in pore size, oxide thickness, and Ca/P ratio for the oxide layer with the applied voltage during the PEO process. X-ray diffraction (XRD) results indicated an increase in the crystalline rutile phase in the oxide layer with voltage and HT. Nanoindentation shows an increase in the oxide hardness and elastic modulus with increased voltage and HT, leading to an improvement in the wear resistance.     

Investigation of poly(methyl acrylate) grafted chitosan as a polymeric drug carrier

The graft copolymerization of methyl acrylate (MA) onto chitosan in aqueous medium was investigated using potassium persulfate (KPS) as initiator. The grafting conditions were optimized by studying the effects of the polymerization variables (the initiator concentration, the ratio of monomer to chitosan, and reaction temperature) on the percentage of grafting (PG). PG was found to depend on these variables, and the highest grafting percentage (256 %) could be obtained at chitosan = 1 g, KPS = 4.5 × 10^?3 M, methyl acrylate monomer = 6 g, T = 60 °C and t = 180 min. The graft copolymer was characterized by Fourier transform infrared spectra analysis, thermogravimetry (differential thermogravimetry, differential scanning calorimetric), X-ray powder diffraction as well as CP-MAS ¹³C NMR spectroscopy. These analyses are highly confirmed the formation of poly(methyl acrylate) grafted chitosan (PMAGC). Furthermore, the gelation of the grafted polymers (PG 68, 122, 218 and 256 %) in distilled water has been studied, and the results revealed that the percentage of swelling number increase with increasing PG of the polymers. Controlled release of niacin (vitamin B₃) from the hydrogel of the grafted polymers (PG 68, 122 and 256 %) in aqueous medium has been studied using ultraviolet absorption to follow quantities released at different times (for each experiment: PMAGC 100 mg, niacin 2.46 mg, distilled water 100 ml). The study was repeated again with same conditions except the using of 4.92 mg of niacin instead of 2.46 mg (PG of the grafted polymer is 256 %). The diffusion coefficient (D, cm²/h) of niacin from the hydrogel of the grafted polymer (PG 256 %) was calculated depending on Higuchi model (diffusion coefficient of the first load is 0.00194 cm²/h while 0.00255 cm²/h of the second load).     

Mobility Analysis of 2 nm to 11 nm Aerosol Particles with an Aspirating Drift Tube Ion Mobility Spectrometer

We describe the performance of a drift tube-ion mobility spectrometry (DT-IMS) instrument for the measurement of aerosol particles. In DT-IMS, the electrical mobility of a measured particle is inferred directly from the time required for the particle to traverse a drift region, with motion driven by an electrostatic field. Electrical mobility distributions are hence linked to arrival time distributions (ATDs) for particles reaching a detector downstream of the drift region. The developed instrument addresses two obstacles that have limited DT-IMS use for aerosol measurement previously: (1) conventional drift tubes cannot efficiently sample charged particles at ground potential and (2) the sensitivities of commonly used Faraday plate detectors are too low for most aerosols. Obstacle (1) is circumvented by creating a “sample volume” of aerosol for measurement, defined by the streamlines of fluid flow. Obstacle (2) is bypassed by interfacing the end of the drift region with a condensation particle counter. The DT-IMS prototype shows high linearity for arrival time versus inverse electrical mobility (R ² > 0.99) over the size range tested (2.2–11.1 nm), and measurements compare well with both analytical and numerical models of device performance. A dimensionless calibration curve linking drift time to inverse electrical mobility is developed. In less than 5 s, it is possible to measure 11.1 nm particles, while 2.2 nm particles are analyzable on a subsecond scale. The transmission efficiency is found to be dependent upon electrostatic deposition for short drift times and upon advective losses for long drift times.

Copyright 2014 American Association for Aerosol Research     

吴也凡的唯美天驹艺术

<正>吴也凡原创陶瓷艺术作品新加坡展选登——天驹系列No.5、No.6(55×112cm)景德镇陶瓷学院教授、景德镇中外陶瓷艺术协会艺术总监吴也凡博士(改革开放后厦门大学最早培养的几批博士之一)系晚清两房进士之后,1953年出身于名门艺术世家,自幼在当地名师指导下勤习书法与绘画,还受过良好的音乐教育。1966年开始的文化大革命摧残了一代人的梦想。1968年吴也凡通过亲友介绍在衡阳界牌的瓷厂学习画瓷,此后就一直与陶瓷美术有了不解之缘。文革动乱结束后,举国上下科技兴国,从1980