Development of a low-carbon,healthy and innovative value-added riceberry rice product through life cycle design

Clean Technologies and Environmental Policy - Life cycle assessment was applied to a riceberry rice product to support decisions on the development of an innovative, healthy, and low-carbon product...     

Influence of the Composition of Electrolyte for Hard Anodizing of Aluminum on the Characteristics of Oxide Layer

Materials Science - The procedure of hard anodizing is carried out at a temperature of (– 4)–0°C for 60 min. A 20% aqueous solution of H2SO4 is used as the base electrolyte. In the...     

A new model of shear creep and its experimental verification

Mechanics of Time-Dependent Materials - Creep exerts a significant role in rock engineering safety. In engineering practice, it is helpful to develop a mathematical model representing rock creep...     

Time-temperature behavior of carbon/epoxy laminates under creep loading

Mechanics of Time-Dependent Materials - The time-temperature creep behavior of advanced composite laminates is herein determined through a comprehensive set of experiments and analytical modeling....     

On the mechanism of aluminum ignition in steam explosions

An available theory [Epstein, M., Fauske, H.K., 1994. A crystallization theory of underwater aluminum ignition. Nucl. Eng. Des. 146, 147–164] of the ignition of aluminum melt drops under water, which is based on the assumption that the aluminum oxide (Al₂O₃) drop-surface skin first appears in a metastable molten state, is compared with existing experimental data on the ignition of aluminum drops behind shock waves in water [Theofanous, T.G., Chen, X., DiPiazza, P., Epstein, M., Fauske, H.K., 1994. Ignition of aluminum droplets behind shock waves in water, Phys. Fluids 6, 3513–3515]. The predicted and measured ignition temperature of about 1770 K coincides approximately with the spontaneous nucleation temperature of supercooled liquid Al₂O₃ (1760 K). This suggests that the crystallization of the oxide layer represents a strong ‘barrier’ to aluminum drop ignition under water. Apparently a similar interpretation is applicable to aluminum drop ignition in gaseous oxidizing atmospheres. We conclude from the theory that the low-temperature aluminum ignitions (in the range 1100–1600 K) that have been observed during steam explosions are a consequence of the short aluminum drop oxidation times in this environment relative to the characteristic time for Al₂O₃ crystallization. Several aspects of the aluminum drop/shock interaction experiments besides ignition are discussed in the paper. In particular, the experiments provide strong evidence that during the course of a vapor explosion metal fragmentation occurs via a thermal mechanism at low pressure and precedes the development of a high-pressure shock.     

Development of a multigrid-type microstrip gas chamber

Conventional microstrip gas chambers (MSGCs) have encountered many difficulties, such as limited gas gain and sparking damages. We propose a new multigrid-type MSGC (M-MSGC) to overcome some of these difficulties. Additional grid strips are inserted between the anode and the cathode in this new type of MSGC. Gaps between these strips are chosen to be as small as 10 μm where one can expect an efficient removal of the surface charge. With the existence of other strips with lower potentials than the anode, the field strength around the neighboring grid to the anode strip is not as high as the conventional small-gap MSGCs. The contribution of the surface streamer to the damage is greatly suppressed because the electric field parallel to the surface is screened by the intermediate grid electrodes. However, additional electrodes also screen all the electric field of the upper part of the substrate, and we cannot observe induced signals from the backside of the substrate. To overcome that difficulty, we propose another signal readout method using a patterning approach. Floating pads are placed close to the cathode strip on the surface of the M-MSGC, and the induced charges are read out via the pads. If the area of the pads is sufficiently large and the positive charges are moving toward the pads, the backside electrodes can sense the induced charge. Collected charges on the pads are leaked through the surface resistance. The backside signal through 2.3-mm-thick glass readout of the position along the cathode strips is successfully confirmed through experimental results     

Radiation distribution sensing with normal optical fiber

The purpose of this study is to develop a radiation distribution monitor using a normal plastic optical fiber. The monitor has a long operating length and can obtain continuous radiation distributions. A principle of the position sensing is based on a time-of-flight technique. The monitor is sensitive to beta rays or charged particles, gamma rays, and fast neutrons. The spatial resolutions for beta-rays ( ⁹⁰Sr-⁹⁰Y), gamma-rays (¹³⁷Cs), and D-T neutrons are 30, 37, and 13 cm, respectively. The detection efficiencies for the beta-rays, gamma-rays, and D-T neutrons are 0.11%, 1.6×10 ^-5% and 1.2×10^-4%, respectively. The effective attenuation length of the detection efficiency is 18 m. In this paper, we describe the basic characteristics of this monitor     

Corium spreading and coolability: CSC Project

In the context of severe accidents, large R&D efforts throughout the world are currently directed towards ex-vessel corium behaviour. Among the mitigation means which can be envisaged, the European industries and utilities are considering the implementation of a core-catcher outside the reactor pressure vessel in order to prevent basemat erosion and to stabilize and control the corium within the containment. The CSC project focused on two key phenomena for external core-catcher efficiency, reliability and safety: spreading and coolability. An experimental programme, covering different scenarios and including both simulant and real materials provided a lot of results which now constitute a large database and which enabled the qualification of computer codes.