Catalytic activities and properties of mesoporous sulfated Al2O3–ZrO2

Mesoporous sulfated Al₂O₃–ZrO₂ (MSAZ) catalysts with large surface areas and pore volumes after calcination at high temperature (650 °C) and with higher Al₂O₃ content than 20wt% were successfully prepared from a template of block copolymer (P84). The MSAZ catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption, transmission electron microscopy (TEM), ²⁷Al magic-angle spinning nuclear magnetic resonance (MAS NMR), thermogravimetric analysis (TG–DTG), temperature-programmed desorption of ammonia (NH₃-TPD) and infrared spectra (IR) of adsorbed pyridine. It is shown that the resulting mesostructured sulfated Al₂O₃–ZrO₂ samples have a well-developed textural mesoporosity. The number of acid sites present on MSAZ catalysts is higher than that on conventional sulfated zirconia, and the former catalysts are more active than the latter one for various acid-catalyzed reactions.     

Composition of mixed octadecadienoates via ozonolysis,chromatography and computer solution of linear equations

An approach to the analysis of 55 possible nonconjugated positional isomers of octadecadienoic acid is described and tested with mixtures of individual synthetic methyl esters. In the first example, by ozonolysis a sevencomponent mixture consisting ofcis,cis 5,12-, 6,10-, 6,11-, 6,12-, 7,12-, 8,12-, and 9,12-octadecadienoates was converted to aldehydes, aldehyde-esters and dialdehydes. These fragments were separated on a 50 m×0.2 mm free fatty acid phase (FFAP) vitreous silica capillary column. Equations for an arbitrarily restricted 12×15 matrix of linear simultaneous equations and a computer solution of the matrix provided the composition of the initial methyl octadecadienoate mixture. The power and significance of this method became apparent with the observation that only two of the seven isomers in the known mixture were resolved as single peaks by state-of-the-art capillary gas chromatography, but all seven were identified and estimated with acceptable error by the ozonolysis-capillary gas chromatography-computer procedure. In a generalized approach to the analysis of the 55 possible nonconjugated isomers, a computer program selects the appropriate matrix of linear simultaneous equations based on the aldehyde data supplied by the analyst. Twenty of 21 combinations of seven isomeric esters taken five at a time have been analyzed to assess the efficiency of the method. To illustrate applicability at this stage of development, the method has been used to analyze the diene products of the hydrazine reduction of γ-linolenic acid and the diene products from the biological desaturation of isomeric monoenes. The possibility of distinguishing geometric and positional isomers of 18∶2 has been opened by the observed separation ofcis-andtrans-unsaturated aldehydes and aldehyde-esters. Presented in part at the 16th World Congress of the International Society for Fat Research, October 4–7, 1983, in Budapest, Hungary, and at the American Oil Chemists' Society Meeting, May 15, 1986, in Honolulu, Hawaii.     

Fabrication and amplification of Rhodamine B‐doped step‐index polymer optical fiber

A step‐index polymer optical fiber (SI POF) containing Rhodamine B in poly(methyl methacrylate) (PMMA) has been fabricated by a preform technique. Fluorescence of different fiber lengths were observed and discussed. A high gain (23 dB) for a SI POF with 60‐cm length, 400‐μm diameter was obtained. The Rhodamine B content of the doped SI POF is 5 ppm‐wt. The signal wavelength providing the highest gain for a 60 cm SI POF is around 630 nm, and the optimum fiber length is about 60 cm at 10 kW launched pump power. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 681–685, 2004     

竹材丙酮法木质素高效分离技术研究

在一定的温度、压力条件下,利用丙酮提取竹材中的木质素,丙酮通过蒸馏回收后,可以反复利用;而通过蒸馏,得到的高纯度的木质素是重要的化工原料,整个过程形成一个封闭循环系统,基本上无三废排放;研究结果表明:当丙酮浓度为80%,液固比为10∶1,在最高反应温度160℃下保温3h,降解木质素的效果最佳;为解决制浆造纸行业废水对环境的污染问题提出了一条新的途径。     

Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.     

Synthesis and characterization of copolythiophene

Copolythiophenes (Co‐PTs), poly(3‐hexylthiophene‐co‐3‐thiophene carboxylic acid) (P3HT‐TCa), poly(3‐hexyloxylthiophene‐co‐3‐thiophene carboxylic acid) (P3HOT‐TCa), and poly(3‐phenylthiophene‐co‐3‐thiophene carboxylic acid) (P3PhT‐TCa), were synthesized by chemical oxidized polymerization to investigate the effect of copolymerization on the properties of polythiophenes (PTs). Gel permeation chromatography showed that the molecular weight (MW) of Co‐PT was lower than that of homopolythiophene. Fourier transform infrared (FTIR) spectra indicated that the copolymerization was successful between the monomers. The λ_max of Co‐PTs gave a “blue shift” in ultraviolet‐visible (UV‐VIS) spectra. Photoluminescence (PL) spectra showed that the PL intensity of Co‐PT became weaker than that of homopolythiophene and the disappearance of PL had been observed in P3HOT‐TCa. The thermal stability of Co‐PT was influenced by the carboxyl for its low decomposition temperature. Furthermore, the copolymerization between multi‐wall carbon nanotube containing thiophene ring (MWNT‐Th) and 3‐hexyloxylthiphene could also take place successfully. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

一种新的S/PDIF接收机数据译码的实现方法

论文分析了S/PDIF音频数据流的特点,引入模式识别中的训练机对S/PDIF音频数据流进行现场脉冲宽度特征提取。依据训练机结果建立分类器实现脉冲宽度分类,根据脉冲宽度进行同步前置码和逻辑电平的解码。利用硬件描述语言Verilog进行设计实现与验证,仿真结果说明这种特征提取方法可以提高S/PDIF接收机数据解译码的适应性和准确性。     

后XP时代网络安全防护技术探究

伴随着微软公司不断改革与发展,windows XP服务也在今年2014年4月8日正式退役.世界各个行业与单位都开始在工作中进一步使用计算机技术,但不少老用户依旧习惯使用windowsXp系统,这就需要在后XP时代网络安全防护技术不断适应这部分客户的需求,保障他们电脑使用的安全性,为以后计算机网络安全防护提供有效防护措施.     

Mathematical model of deoxidization with post stirring in a combined blowing converter

Dissolved oxygen in the steel at the terminal of the converter smelting process is the main cause for the formation of oxide inclusions, and the high terminal oxygen content worsens the steel cleanness. However, post stirring in a combined blowing converter can promote the carbon-oxygen reaction in the liquid steel and reduce the dissolved oxygen content at the terminal of the converter smelting process. Thus, the mathematical model of deoxidization in the post stirring process was obtained, and the rationa...     

浅析高校女性馆员职业发展面临的困惑与权益保障

女性馆员是高校图书馆事业发展的重要生力军,而女性馆员在进行职业岗位的择选、调整、变化,实现自我价值增值等方面面临多种冲突与困惑。如何保护女性馆员的权益,保障她们拥有与男性平等的发展权、建立社会支持系统和法律制度的保障,是全体高校女性馆员的呼声。