镁合金材料的应用及其加工技术的发展(1)

第一部分较全面地介绍镁及镁合金材料在交通运输、航空航天、电子工业、核能工业、化工、冶金等部门的应用方向与实例。第二部分简要地论述镁合金材料的加工技术，重点介绍镁合金新材料的研发、熔炼铸造工艺、压铸成型工艺、挤压技术、锻压技术与轧制技术的进展。指出镁合金是一种很有发展前景的新型金属材料，其加工技术将获得进一步的快速发展。     

变频调速传动系统的电磁兼容分析

在变频调速传动系统中,变频器会产生和受到各种电磁干扰。本文分析了变频调速传动系统的主要电磁干扰源和耦合途径,并阐述了抑制其电磁干扰的措施。     

IrO2-pH微电极的研制及钢筋/混凝土界面pH的测量

采用电化学阳极氧化和高温碳酸盐氧化两种方法制备 IrO2-pH微电极，其特点是对氢离子响应快、线性范围宽、机械性能好、具有长期稳定性 .考察了该电极的pH响应特性、化学成分、机械性能等.结果表明，这种IrO2-pH微电极 适用于钢筋/混凝土界面pH值的原位测量.     

CREEP CRACK PROPAGATION IN CONVENTIONAL CAST AND DIRECTIONALLY SOLIDIFIED SUPERALLOY RENE 80

The creep crack propagation in superalloy René80 of two different microstructures,i.e.,equiaxed grain structure by conventional casting and columnar grain by directionalsolidification,was investigated under static load at 1123 K.The creep crack growth rate,da/dt,seems to be correlated with the stress intensity factor,K.The creep crack growth ratein the directionally solidified alloy is lower than that in the conventional cast alloy,owing tothe elimination of transverse grain boundaries.The effect of microstructure on creep crackpropagation has also been discussed.     

BEHAVIOR OF Mg AND ITS EFFECT ON MECHANICAL PROPERTIES OF CAST Fe_3Al ALLOYS

Proper addition of 0.002 wt-% Mg to cast Fe_3Al alloy may obviously improve the room andhigh temperature tensile properties.Auger spectra show that Mg segregates near grainboundaries as very thin layers.Observation under TEM reveals that a suitable amount of Mgenhances ability of cooperative internal deformation so that the dislocations will ease the con-tinuous slip deformation through grain boundaries.The fracture feature of Fe_3Al alloy is oftransgranular cleavage at room temperature and cracks initiate at grain boundaries.     

EFFECT OF COMPOSITION ON HYDROGEN EMBRITTLEMENT IN Ni-Fe FCC ALLOYS

The ductility loss and threshold stress intensity,K_(IH)during hydrogen charging were measuredfor pure Ni and four Ni-Fe fcc alloys.The results show that ductility loss in 40Ni60Fe alloyand K_(IH)a 50Ni50Fe alloy have a minimum value.The variations of the amounts of hydride,hydrogen evolution and dislocation structure with composition have been investigated.The va-riation of hydrogen embrittlement susceptibility with composition measured by ductility lossand by K_(IH)or K_(IH)/K_C can be explained by means of the synthetical effects of amount ofhydride,solutionized hydrogen and the extent of dislocation planarity on hydrogenembrittlement susceptibility.     

硼对快凝Ni3Al组织结构及力学性能的影响

本文通过快凝及加硼合金化的方法改善金属间化合物Ni_3Al的韧性。实验表明:加入0.5-1.4at.-％的硼对Ni_3Al的塑性提高最有利。结构分析表明:在含1.37at.-％硼的Ni_3Al中,硼以Ni_(23)B_6弥散相及晶界偏聚方式存在;当硼量增至2.22at.-％时,硼以粗大的Ni_(23)B_6及NiB_(12)相在晶界处析出。无硼的Ni_3Al晶界为大角度晶界;当硼加至1.37at.-％时,Ni_3Al晶界以位错排列成亚晶界,以小角晶界形式存在。     

涡流检测技术在宝钢热轧轧辊上的应用

介绍了轧辊涡流检测仪的工作要求、设备组成和使用方法,指出对轧辊进行涡流检测可防止爆辊,减少轧辊磨削量。     

应用有限元方法对高速电主轴的优化设计

介绍了高速电主轴的结构特点，应用有限元分析软件ANSYS以刚度为目标对高速电主轴进行了优化设计，并对优化后的结构进行了热态校核。     

冷轧处理线卷取机带头定位精度的改进

针对采用带头与卷取机芯轴橡胶套筒定位区动态接触的传统自动定位技术控制效果不好而带来带头印缺陷的问题，对其产生原因进行了分析，这是因为不同规格、钢种带钢的工艺参数不同，带钢穿带过程中在传送辊上的打滑量不同，在传输通道上的下垂量不同，带头到达卷取机芯轴定位区时计算带头位置与实际带头位置存在不稳定的偏差，因此带头定位精度不稳定。为此，开发了双动态自动定位技术，穿带过程中预留了足够的带钢打滑及下垂富余量，且带头与定位区中心线在助卷皮带咬入口静止状态下接触，消除了影响带头定位精度的主要因素，带头定位精度能稳定在±15 mm的误差范围内。实际应用效果表明，该方法可行、实用。