改性纤维素增强丙烯酰胺水凝胶的合成与拉伸性能研究

采用水媒法制备了低取代度羧甲基纤维素,并用接枝聚合法制备了改性纤维素/丙烯酰胺水凝胶,考察了单体质量比、取代度等对水凝胶拉伸性能的影响.结果表明:对于接枝聚合反应,采用低取代度羧甲基纤维素可以提高纤维素的有效用量;当交联剂用量为180 mg/L、引发剂1 300 mg/L、低取代度羧甲基纤维素和丙烯酰胺质量比在1∶4 ～ 1∶4.5之间、单体质量分数为30%时,合成水凝胶的拉伸强度达到0.28 MPa;在此基础上,适量添加15%的淀粉可使水凝胶拉伸强度达到0.47 MPa;添加1%二氧化钛可使水凝胶拉伸强度达到0.38 MPa.     

单相交流参数测量仪设计

为了测量实验室中DC-AC逆变变频单相交流电参数,设计了基于MSP430F169单片机的单相交流参数测量仪.与采样、过零比较电路配合,利用单片机片内定时器测量频率和相位差;与采样、放大、精密整流和滤波电路配合,利用片内A/D转换器通过瞬时采样法测量电压、电流有效值并计算出视在功率、有功功率和无功功率.经原理样机验证可在LCM12864点阵显示器上显示出各参数测量值.     

MC(Mid-Century)催化氧化过程的研究进展

介绍了MC催化氧化过程规律；从催化荆体系的改进、新型溶剂体系的开发、反应器构型和配套设施的改进、富氧氧化技术的开发等方面综述了近年来MC技术的发展；探讨了MC液相催化氧化技术应用范围的拓展以及MC液相催化氧化过程的发展方向。     

Fe_(40)Co_(40)Zr_(10)B_9M_1(M=Cu,Ge,Ag)合金的热稳定性及微观结构研究

采用单辊快淬法制备Fe40Co40Zr10B9Cu1、Fe40Co40Zr10B9Ge1和Fe40Co40Zr10B9Ag1非晶合金薄带,并对3种合金在不同温度下进行热处理.利用差热分析仪(DTA)和X射线衍射仪(XRD)等测试手段对样品的热稳定性及微观结构进行研究.结果表明:Fe40Co40Zr10B9Cu1、Fe40Co40Zr10B9Ge1和Fe40Co40Zr10B9Ag13种合金的激活能分别为262.4、267.6和252.3 k J/mol,说明Cu元素、Ge元素和Ag元素的添加对合金的热稳定性影响不大,Ge元素的添加最有利于提高合金的热稳定性.3种合金的晶化过程相似:非晶→非晶+α-Fe(Co)→α-Fe(Co)+Zr Co3B2+Fe(Co)3Zr.     

基于I2C总线技术的等离子喷焊系统的研究

阐述了基于I^2C总线技术的等离子喷焊过程控制系统的设计原理，介绍了软硬件及接口设计技术。实践表明，采用I^2C总线技术，不仅使系统的芯片大大减少，系统的灵活性增强，而且提高了系统的抗干扰能力。     

冷轧工作辊摩擦不稳定分析及其抑制对策

对冷轧机工作辊由于摩擦力引起的垂直、横向振动作了定性分析，指出了它们的危害，提出了预防措施。     

一种面向空地一体化组网的体系架构

空间网络是空地一体化组网中地面网络延伸的重要组成部分。针对空间网络为移动星座的场景,传统的空地一体化组网模型将空间网络视为独立自治域,利用边界网关协议将空间网络与地面自治域互联起来,最大化同地面网络保持兼容。然而,传统组网模型存在边界网关面临频繁会话中断或大量路由更新等问题。通过重新审视空间网络的角色定位和边界划定问题,提出一种面向空地一体化组网的体系架构Slink。Slink的核心思想是空间网络为地面网络提供互联通道,利用星地网关隔离空地两网间的路由更新。实验仿真表明,Slink体系架构能够有效减小对空间路由器的路由存储空间需求,降低星地网络间的带宽消耗。     

Recover Fault Services via Complex Service-to-Node Mappings in Wireless Sensor Networks

With the motivation of seamlessly extending wireless sensor networks to the external environment, service-oriented architecture comes up as a promising solution. However, as sensor nodes are failure prone, this consequently renders the whole wireless sensor network to seriously faulty. When a particular node is faulty, the service on it should be migrated into those substitute sensor nodes that are in a normal status. Currently, two kinds of approaches exist to identify the substitute sensor nodes: the most common approach is to prepare redundancy nodes, though the involved tasks such as maintaining redundancy nodes, i.e., relocating the new node, lead to an extra burden on the wireless sensor networks. More recently, other approaches without using redundancy nodes are emerging, and they merely select the substitute nodes in a sensor node’s perspective i.e., migrating the service of faulty node to it’s nearest sensor node, though usually neglecting the requirements of the application level. Even a few work consider the need of the application level, they perform at packets granularity and don’t fit well at service granularity. In this paper, we aim to remove these limitations in the wireless sensor network with the service-oriented architecture. Instead of deploying redundancy nodes, the proposed mechanism replaces the faulty sensor node with consideration of the similarity on the application level, as well as on the sensor level. On the application level, we apply the Bloom Filter for its high efficiency and low space costs. While on the sensor level, we design an objective solution via the coefficient of a variation as an evaluation for choosing the substitute on the sensor level.     

"交换机与路由器"课程教学改革策略研究

本文依据交换机与路由器学科技术的特点及教学实践中存在的现实问题,展开了对教材建设、教学手段及教学模式的全面探讨,并制定了科学有效的实践教学改革策略,对提升交换机与路由器技术课程教学效果水平有重要的推进作用.